Restorative Dentistry and Endodontics

  • 제36권3호
  • /
  • Pages.203-210
  • /
  • 2011
  • /
  • 2234-7658(pISSN)
  • /
  • 2234-7666(eISSN)
대한치과보존학회 (The Korean Academy of Conservative Dentistry)
권호 표지
DOI QR코드

DOI QR Code

한 단계 자가 산부식 접착제의 적용 방식이 미세인장 결합강도에 미치는 효과

Influence of application methods of one-step self-etching adhesives on microtensile bond strength

  • 최철규 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 손성애 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 하진희 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 허복 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 김현철 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 권용훈 (부산대학교 치의학전문대학원 치과재료학교실) ;
  • 박정길 (부산대학교 치의학전문대학원 치과보존학교실)
  • Choi, Chul-Kyu (Department of Conservative Dentistry, Pusan National University School of Dentistry) ;
  • Son, Sung-Ae (Department of Conservative Dentistry, Pusan National University School of Dentistry) ;
  • Ha, Jin-Hee (Department of Conservative Dentistry, Pusan National University School of Dentistry) ;
  • Hur, Bock (Department of Conservative Dentistry, Pusan National University School of Dentistry) ;
  • Kim, Hyeon-Cheol (Department of Conservative Dentistry, Pusan National University School of Dentistry) ;
  • Kwon, Yong-Hun (Department of Dental Materials, Pusan National University School of Dentistry) ;
  • Park, Jeong-Kil (Department of Conservative Dentistry, Pusan National University School of Dentistry)
  • 투고 : 2011.03.22
  • 심사 : 2011.05.02
  • 발행 : 2011.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

연구목적: 이 연구의 목적은 다양한 방식의 한 단계 자가 부식 접착제의 적용이 직접 복합 레진 수복의 미세 인장 강도에 미치는 영향을 평가하는 것이었다. 연구 재료 및 방법: 36개의 발거된 대구치를 사용하여, 3종류의 한 단계 자가 부식 접착제(Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond)와 적용 방식에 따라 12개의 군으로 나누었다. 접착제를 다음의 방식으로 상아질에 적용하였다. 1) single coating, 2) double coating, 3) manual agitation, 4) ultrasonic agitation. 접착제 적용 후, 광중합 복합 레진으로 수복하였다. 24시간 동안 실온의 증류수에 보관한 후, 각 군당 15개의 시편을 준비하여 미세인장 결합 강도를 측정하였다. 결과: Manual agitation, ultrasonic agitation군은 single coating, double coating군에 비해 유의하게 높은 미세인장 결합 강도를 보였다. Double coating군은 single coating군에 비해 유의하게 높은 미세인장 결합 강도를 보였으며, manual agitation군과 ultrasonic agitation군 간에는 미세인장 결합 강도의 유의한 차이가 없었다. 접착제 종류에 따라 미세인장 결합 강도의 유의한 차이가 있었고, 그 중 Clearfil Tri-S Bond가 가장 높았다. 결론: 한 단계 자가 산부식 접착제의 적용 방법과 재료에 따라 미세인장 결합 강도에 유의한 차이가 있었다. 접착제 종류에 관계없이 manual agitation과 ultrasonic agitation은 유의하게 높은 미세인장 결합강도를 보였다.

Objectives: The purpose of this study was to evaluate the effect of various application methods of one-step self-etch adhesives to microtensile resin-dentin bond strength. Materials and Methods: Thirty-six extracted human molars were used. The teeth were assigned randomly to twelve groups (n = 15), according to the three different adhesive systems (Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond) and application methods. The adhesive systems were applied on the dentin as follows: 1) The single coating, 2) The double coating, 3) Manual agitation, 4) Ultrasonic agitation. Following the adhesive application, light-cure composite resin was constructed. The restored teeth were stored in distilled water at room temperature for 24 hours, and prepared 15 specimens per groups. Then microtensile bond strength was measured and the failure mode was examined. Results: Manual agitation and ultrasonic agitation of adhesive significantly increased the microtensile bond strength than single coating and double coating did. Double coating of adhesive significantly increased the microtensile bond strength than single coating did and there was no significant difference between the manual agitation and ultrasonic agitation group. There was significant difference in microtensile bonding strength among all adhesives and Clearfil Tri-S Bond showed the highest bond strength. Conclusions: In one-step self-etching adhesives, there was significant difference according to application methods and type of adhesives. No matter of the material, the manual or ultrasonic agitation of the adhesive showed significantly higher microtensile bond strength.

키워드

참고문헌

  1. Tay FR, Gwinnett AJ, Pang KM, Wei SH. Resin permeation into acid-conditioned, moist, and dry dentin: a paradigm using water-free adhesive primers. J Dent Res 1996;75:1034-1044. https://doi.org/10.1177/00220345960750040601
  2. Watanabe I, Nakabayashi N, Pashley DH. Bonding to ground dentin by a phenyl-P self-etching primer. J Dent Res 1994;73:1212-1220.
  3. Tay FR, Pashley DH, Yoshiyama M. Two modes of nanoleakage expression in single-step adhesives. J Dent Res 2002;81:472-476. https://doi.org/10.1177/154405910208100708
  4. Tay FR, Pashley DH. Have dentin adhesives become too hydrophilic? J Can Dent Assoc 2003;69:726-731.
  5. Osorio R, Toledano M, de Leonardi G, Tay F. Microleakage and interfacial morphology of self-etching adhesives in class V resin composite restorations. J Biomed Mater Res B Appl Biomater 2003;66:399-409.
  6. Toledano M, Osorio R, de Leonardi G, Rosales-Leal JI, Ceballos L, Cabrerizo-Vilchez MA. Influence of selfetching primer on the resin adhesion to enamel and dentin. Am J Dent 2001;14:205-210.
  7. Wang Y, Spencer P. Continuing etching of an all-inone adhesive in wet dentin tubules. J Dent Res 2005;84:350-354. https://doi.org/10.1177/154405910508400411
  8. Tay FR, Pashley DH. Water treeing-a potential mechanism for degradation of dentin adhesives. Am J Dent 2003;16:6-12.
  9. Carvalho RM, Chersoni S, Frankenberger R, Pashley DH, Prati C, Tay FR. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 2005;26:1035-1042. https://doi.org/10.1016/j.biomaterials.2004.04.003
  10. Eliades G, Vougiouklakis G, Palaghias G. Heterogeneous distribution of single-bottle adhesive monomers in the resin-dentin interdiffusion zone. Dent Mater 2001;17:277-283. https://doi.org/10.1016/S0109-5641(00)00082-8
  11. Nunes TG, Garcia FC, Osorio R, Carvalho R, Toledano M. Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques. Dent Mater 2006;22:963-972. https://doi.org/10.1016/j.dental.2005.10.008
  12. Tay FR, Pashley DH, Garcl′a-Godoy F, Yiu CK. Singlestep, self-etch adhesives behave as permeable membranes after polymerization. Part II. Silver tracer penetration evidence. Am J Dent 2004;17:315-322.
  13. Son SA, Hur B. The effect of multiple application on microtensile bond strength of all-in-one dentin adhesive systems. J Kor Acad Cons Dent 2004;29:423-429. https://doi.org/10.5395/JKACD.2004.29.5.423
  14. King NM, Tay FR, Pashley DH, Hashimoto M, Ito S, Brackett WW, Garcia-Godoy F, Sunico M. Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent 2005;18:126-134.
  15. Park JG, Cho KH, Cho YG. Effect of application methods of a self-etching primer adhesive system on enamel bond strength. J Kor Acad Cons Dent 2008;33:90-97. https://doi.org/10.5395/JKACD.2008.33.2.090
  16. Nara Y, Nagakura Y, Ito T, Suzuki T, Kimishima T, Maseki T, Dogon IL. Bond strength of self-etching adhesives to cervical lesion dentin. J Dent Res 2004;83(Special Issue B):Abstract #0445.
  17. Hashimoto M, Sano H, Yoshida E, Hori M, Kaga M, Oguchi H, Pashley DH. Effects of multiple adhesive coatings on dentin bonding. Oper Dent 2004;29:416-423.
  18. Ito S, Tay FR, Hashimoto M, Yoshiyama M, Saito T, Brackett WW, Waller JL, Pashley DH. Effects of multiple coatings of two all-in-one adhesives on dentin bonding. J Adhes Dent 2005;7:133-141.
  19. Miyazaki M, Hinoura K, Kanamaru T, Koga K, Iwauchi H, Onose H. Study on light cured composite resin-influence of pretreated procedures for dentin surfaces on shear bond strength to dentin. Japan J Cons Dent 1991;34:734-741.
  20. Chan KM, Tay FR, King NM, Imazato S, Pashley DH. Bonding of mild self-etching primers/adhesives to dentin with thick smear layers. Am J Dent 2003;16:340-346.
  21. Velasquez LM, Sergent RS, Burgess JO, Mercante DE. Effect of placement agitation and placement time on the shear bond strength of 3 self-etching adhesives. Oper Dent 2006;31:426-430. https://doi.org/10.2341/05-52
  22. Lee J, Jang KT, Kim JW, Lee SH, Hahn SH, Kim CC. Effect of ultrasonic vibration on dentin bond strength and resin infiltration. Am J Dent 2003;16:404-408.
  23. Kim JW, Jang KT, Lee SH, Kim CC, Hahn SH. Effect of ultrasonicvibration on resin-dentin bonding: SEM study. J Dent Res 2002;81:Abstract #1905, pA-248.
  24. Finger WJ, Tani C. Effect of application mode on bonding performance of self-etching adhesives. Am J Dent 2005;18:41-44.
  25. Bagis B, Turkarslan S, Tezvergil-Mutluay A, Uctasli S, Vallittu PK, Lassila LV. Effect of ultrasonic agitation on bond strength of self-etching adhesives to dentin. J Adhes Dent 2008;10:441-445.
  26. Dal-Bianco K, Pellizzaro A, Patzlaft R, de Oliveira Bauer JR, Loguercio AD, Reis A. Effects of moisture degree and rubbing action on the immediate resindentin bond strength. Dent Mater 2006;22:1150-1156. https://doi.org/10.1016/j.dental.2005.10.010
  27. Reis A, Pellizzaro A, Dal-Bianco K, Gones OM, Patzlaff R, Loguercio AD. Impact of adhesive application to wet and dry dentin on long-term resin-dentin bond strengths. Oper Dent 2007;32:380-387. https://doi.org/10.2341/06-107
  28. Toledano M, Proenca JP, Erhardt MC, Osorio E, Aguilera FS, Osorio R, Tay FR. Increases in dentinbond strength if doubling application time of an acetone-containing one-step adhesive. Oper Dent 2007;32:133-137. https://doi.org/10.2341/06-32
  29. Camps J, Pashley DH. Buffering action of human dentin in vitro. J Adhes Dent 2000;2:39-50.
  30. Tewari S, Goel A. Effect of placement agitation and drying time on dentin shear bond strength: an in vivo study. Oper Dent 2009;34:524-530. https://doi.org/10.2341/08-045-C
  31. Furukawa M, Shigetani Y, Finger WJ, Hoffmann M, Kanehira M, Endo T, Komatsu M. All-in-one self-etch model adhesives: HEMA-free and without phase separation. J Dent 2008;36:402-408. https://doi.org/10.1016/j.jdent.2008.02.011
  32. Park SI, Kim YM, Roh BD. The effect of dentin bonding agent thickness on stress distribution of compositetooth interface : Finite element method. J Kor Acad Cons Dent 2009;34:442-449. https://doi.org/10.5395/JKACD.2009.34.5.442
  33. Shinkai K, Suzuki S, Katoh Y. Effect of air-blowing variables on bond strength of all-in-one adhesives to bovine dentin. Dent Mater J 2006;25:664-668. https://doi.org/10.4012/dmj.25.664
  34. Rueggeberg FA, Margeson DH. The effect of oxygen inhibition on an unfilled/filled composite system. J Dent Res 1990;69:1652-1658. https://doi.org/10.1177/00220345900690100501
  35. Bagis B, Turkaslan S, Vallittu PK, Lassila LV. Effect of high frequency ultrasonic agitation on the bond strength of self-etching adhesives. J Adhes Dent 2009;11:369-374.