한국전산구조공학회논문집 (Journal of the Computational Structural Engineering Institute of Korea)

  • 제24권6호
  • /
  • Pages.685-690
  • /
  • 2011
  • /
  • 1229-3059(pISSN)
  • /
  • 2287-2302(eISSN)
한국전산구조공학회 (Computational Structural Engineering Institute of Korea)
권호 표지

자동요소생성 시스템을 이용한 케미컬 펌프의 지진해석

Seismic Analysis of Chemical Pump Using Automatic Mesh Generation System

  • 장현석 (경기대학교 대학원 기계공학과) ;
  • 이준성 (경기대학교 기계시스템공학과)
  • 투고 : 2011.10.28
  • 심사 : 2011.12.03
  • 발행 : 2011.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 자동요소생성 시스템을 이용한 화학적펌프의 지진해석에 대한 내용이다. 전처리시스템을 CAD시스템, 유한요소 코드와 통합시킨 자동화된 해석시스템은 구조물 최적화 디자인에 효과적으로 사용되어 진다. 해석조건이 수반된 유한요소모델은 자동적으로 해석모델로 부터 생성되어 진다. 또한, 유한요소모델은 해석코드에 의해 자동적으로 해석되어 진다. 이 통합화된 유한요소 시뮬레이션 시스템의 효용성을 화학펌프와 같은 3차원 복잡구조물에 적용하여 보았다.

This paper describes a seismic analysis of chemical pump using automated mesh generation system. The use of an automated analysis system, involving FE codes together with CAD systems and FE pre- and post-processors, has provided an important step towards shortening the design process and structural optimization. The FE model, which is a FE mesh accompanied with the analysis condition, is automatically converted from the analysis model. The FE models are then automatically analyzed using the FE analysis code. This integrated FE simulation system is applied to an analysis of three-dimensional complex solid structures such as a chemical pump.

키워드

참고문헌

  1. Cavendish, J.C. et al. (1985) An Approach to Automatic Three-Dimensional Finite Element Mesh Generation, International Journal for Numerical Methods in Engineering, 21, pp.329-347. https://doi.org/10.1002/nme.1620210210
  2. Chiyokura, H. (1998) Solid Modeling with Designbase: Theory and Implementation, Addition-Wesley.
  3. Lee, J.S. (2002) Development of the Fuzzy-Based System for Stress Intensity Factor Analysis, Int. Journal of Fuzzy Logic and Intelligent Systems, 12(3), pp.255-260. https://doi.org/10.5391/JKIIS.2002.12.3.255
  4. Lee J.S., Lee, H.J. (2010) An Automated CAE System for Multidisciplinary Structural Design: Its Application to Micro Accelerometer, Journal of Mechanical Science and Technology, 24(9), pp.1875-1883. https://doi.org/10.1007/s12206-010-0603-1
  5. Lee, J.S., Shioya, R., Lee, E.C., Lee, Y.C. (2009) Parallel Finite Element Analysis System Based on Domain Decomposition Method, J. of the Computational Structural Engineering Institute of Korea, 22(1), pp.35-44.
  6. Lo, S.H. (1991) Automatic Mesh Generation and Adaptation by Using Contours, Int. J. for Numerical Methods in Eng., 31, pp.689-707. https://doi.org/10.1002/nme.1620310405
  7. Shephard, M.S., Georges, M.K. (1991) Automatic Three-Dimensional Mesh Generation by Finite Octree Technique, International Journal for Numerical Methods in Engineering, 32, pp.709-749. https://doi.org/10.1002/nme.1620320406
  8. Sibson, R. (1997) Locally Equiangular Triangulations, The Computer Journal, 21, pp.243-245.