Journal of Welding and Joining

  • 제29권1호
  • /
  • Pages.107-114
  • /
  • 2011
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

CP강의 디스크레이저 용접부의 경도특성에 미치는 B 함유량의 영향

Effect of B Contents on Hardness Characteristic of Disk Laser Beam Welded CP Steels

  • Park, Tae-Jun (Department of Materials Science and Engineering, Pusan National University) ;
  • Yu, Jung-Woo (Department of Materials Science and Engineering, Pusan National University) ;
  • Kang, Jun-Il (Autoen R&D center Development) ;
  • Han, Tae-Kyo (POSCO Technical Research Laboratories) ;
  • Chin, Kwang-Keun (POSCO Technical Research Laboratories) ;
  • Kang, Chung-Yun (Department of Materials Science and Engineering, Pusan National University)
  • 투고 : 2010.11.05
  • 심사 : 2011.01.03
  • 발행 : 2011.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

CP steel was developed to reduce the weight and increase the strength of car body. When it was welded using state-of-the-art disk laser welding, the effected of boron on the microstructure and hardness were investigated. Welding power was fixed at 3.5kW and welding speeds were 4,8 and 12m/min. Full penetration occurred in welding speed of 12m/min and weld bead was almost unchanged with boron contents. But the welding speed increased, the upper and lower bead were narrowed. In a welding speed of more than 8m/min, underfill defects were formed on the bead bottom. The hardness of weld zone was somewhat fluctuation in fusion zone and HAZ showed the highest hardness values. The hardness of each region showed little change with the boron contents, and softening phenomenon occurred in the HAZ near the base metal regardless of the boron contents.

키워드

참고문헌

  1. S. J. Kim, C. G. Lee, C. S. Oh, D. W. Seo, T.H. Lee, H.N. Han : Development advanced high strength steel for automobile, KIMM, 2010 (in korea)
  2. S. J. Kim, K. G.jin : Development and application of advanced high strength steel for automobile, 2004 45-52 (in korea)
  3. Debanshu Bhattacharya : Developments in advanced high strength steel, (2005) The Joint International Conference of HSLA Steels
  4. S. H. Yoon, J. H. Lee and K. M. Lee : A study on the fatigue properties of boron steel (AISI 51B20), Korean Society for Precision Engineering, 2001, 802-806
  5. S. G. Shi, S. Westgate : Fiber-Delivered Laser Welding of Ultra-High Strength Steels for Automotive Applications, TWI Report, 2007, 865
  6. J. Y. Jang, W. N. Choi, B. H. Jung, C. Y. Kang : Effect of Welding Speed on Mechanical Properties and Formability in Nd:YAG Laser Welds of 1000MPa Grade DP Steel, Journal of KWS, 27-2(2009) 69-75 (in Korean) https://doi.org/10.5781/KWJS.2009.27.2.069
  7. W. S. Jang : Advanced high strength steel weld properties, Journal of KWS, 용접공학 하계대학교재 (2003), 149 - 185 (in Korean)
  8. S. K. Kim, J. S. Kim and N. J. Kim : Metall. Mater. Trans. A, 33A, No. 3 (2002), 701
  9. C. T. Liu, C. L. White, J. A. Horton, Acta Metall. 33 (1985), 213 https://doi.org/10.1016/0001-6160(85)90139-7
  10. T. B. Cameron, J. E. Morral, Metall. Trans. A17, 1986, 1481
  11. Rosenthal, D. : Mathematical theory of heat distribution during welding and cutting. Welding Journal 20(5) (1941), 220-234.
  12. Rosenthal, D. : The theory of moving sources of heat and its application to metal treatments. Trans. ASME48, 1946, 848-866
  13. Mingsheng XIA, Elliot BIRO, Zhiling TIAN and Y. Norman ZHOU : Effects of Heat Input and Martensite on HAZ Softening in Laser Welding of Dual Phase Steels, ISIJ International, (2008) 48-6, 809-814 https://doi.org/10.2355/isijinternational.48.809
  14. Jari Hovikorpi, Apricon Oy : Disk Lasers at TRUMPF, Lasertekniikan Workshop, ELME-Studio Nivala, 2007