DOI QR코드

DOI QR Code

Fatigue laboratory tests toward the design of SMA portico-braces

  • Carreras, G. (Department of Applied Physics, ETSECCPB, UPC) ;
  • Casciati, F. (Department of Structural Mechanics, University of Pavia) ;
  • Casciati, S. (Department ASTRA, University of Catania) ;
  • Isalgue, A. (Department of Applied Physics, ETSECCPB, UPC) ;
  • Marzi, A. (Department of Structural Mechanics, University of Pavia) ;
  • Torra, V. (Department of Applied Physics, ETSECCPB, UPC)
  • 투고 : 2010.01.31
  • 심사 : 2010.10.04
  • 발행 : 2011.01.25

초록

A deeper understanding of the effectiveness of adopting devices mounting shape memory alloy (SMA) elements in applications targeted to the mitigation of vibrations is pursued via an experimental approach. During a seismic event, less than 1000 loading-unloading cycles of the alloy are required to mitigate the earthquake effects. However, the aging effects during the time of inactivity prior to the oscillations (several decades characterized by the yearly summer-winter temperature wave) should be considered in order to avoid and/or minimize them. In this paper, the results obtained by carrying out, in different laboratories, fatigue tests on SMA specimens are compared and discussed. Furthermore, the effects of seismic events on a steel structure, with and without SMA dampers, are numerically simulated using ANSYS. Under an earthquake excitation, the SMA devices halve the oscillation amplitudes and show re-centering properties. To confirm this result, an experimental campaign is conducted by actually installing the proposed devices on a physical model of the structure and by evaluating their performance under different excitations induced by an actuator.

키워드

참고문헌

  1. ABS Consulting Inc.(2007), http://www.absconsulting.com/resources/Catastrophe_Reports/NotoHantoEarthquake.pdf.
  2. Aernoudt, E., Van Humbeeck, J., Delaey, L. and Van Moorleghem, M. (1989), "Copper-base shape memory alloys: alloys for tomorrow", in Proceedings of the Comett Course: The Science and Technology of Shape Memory Alloys, V. Torra, Ed., Univ. Illes Balears, p. 221.
  3. Auricchio, F., Faravelli, L., Magonette, G. and Torra, V. (2001), Shape Memory Alloys: Advances in Modelling and Applications, CIMNE, Barcelona, Spain.
  4. Cardone, D. and Dolce, M. (2009), "SMA-based tension control block for metallic tendons", International Journal of Mechanical Sciences, 51, 159-165. https://doi.org/10.1016/j.ijmecsci.2008.12.002
  5. Casciati S. and Faravelli L. (2008), "Structural components in shape memory alloy for localized energy dissipation", Computers & Structures, 86, 330-339. https://doi.org/10.1016/j.compstruc.2007.01.037
  6. Casciati, F. and Faravelli, L. (2009), "A passive control device with SMA components: from the prototype to the model", Journal of Structural Control and Health Monitoring, 16, 7-8, 751-765.
  7. Casciati, F. and van der Eijk, C. (2008), "Variability in mechanical properties and microstructure characterization of CuAlBe shape memory alloys for vibration mitigation", Smart Structures and Systems, 4, 2, 123-122. https://doi.org/10.12989/sss.2008.4.2.123
  8. Casciati, F., Casciati, S. and Faravelli, L. (2007), "Fatigue characterization of a cu-based shape memory alloy", Proceedings of the Estonian Academy of Sciences - Physics Mathematics, 56(2), 207-217.
  9. Casciati, F., Faravelli, L., Isalgue, A., Martorell, F., Soul, H. and Torra, V. (2008), "SMA fatigue in civil engineering applications", Proceedings CIMTEC08, A10.
  10. Casciati, S. and Faravelli, L. (2006), "Fatigue tests of a cu-based shape memory alloy", Proceedings of the 4th World Conference on Structural Control & Monitoring, San Diego, USA.
  11. Casciati, S. and Marzi, A. (2010), "Experimental studies on the fatigue life of shape memory alloy bars", Smart Structures and Systems, 6(1), 73-86. https://doi.org/10.12989/sss.2010.6.1.073
  12. Dunne, D., Morin, M., Gonzalez, C. and Guenin, G. (2004), "The effect of quenching treatment on the reversible martensitic transformation in CuAlBe alloys", Materials Science and Engineering A 378, 257-262. https://doi.org/10.1016/j.msea.2003.11.079
  13. Isalgue, A., Fernandez, J., Torra, V. and Lovey, F.C. (2006), "Conditioning treatments of Cu-Al-Be shape memory alloys for dampers", Materials Science and Engineering A 438-440, 1085-1088. https://doi.org/10.1016/j.msea.2006.02.074
  14. Isalgue, A., Torra, V., Yawny, A. and Lovey, F.C. (2008), "Metastable effects on martensitic transformation in SMA, Part VI. The clausius-clapeyron relationship", Journal of Thermal Analysis and Calorimetry, 91(3), 991-998. https://doi.org/10.1007/s10973-007-8604-8
  15. Johnson, R., Padgett, J.E., Maragakis, M.E., DesRoches, R. and Saiidi, M.S. (2008), "Large scale testing of nitinol shape memory alloy devices for retrofitting of bridges", Smart Material and. Structures, 17(3), doi: 10.1088/0964-1726/17/3/035018.
  16. Lovey, F.C. and Torra, V. (1999), "Shape memory in cu-based alloys: phenomenological behavior at the mesoscale level and interaction of martensitic transformation with structural defects in Cu-Zn-Al", Progress in Materials Science, 44(3), 189-289. https://doi.org/10.1016/S0079-6425(99)00004-3
  17. Terriault, P., Torra, V., Fischer, C., Brailovski, V. and Isalgue, A. (2007), "Superelastic shape memory alloy damper equipped with a passive adaptive pre-straining mechanism", Ninth Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada.
  18. Torra, V., Auguet, C., Isalgue, A., Lovey, F.C., Sepulveda, A., Soul, H. (2009a), "Metastable effects on martensitic transformation in SMA", Part VIII. Temperature Effects on Cycling, J Therm. Anal. Calorim., DOI 10.1007/s10973-009-0613-3.
  19. Torra, V., Isalgue, A., Auguet, C., Carreras, G., Lovey, F.C., Soul H. and Terriault, P. (2009b), "Damping in civil engineering using SMA. The fatigue behavior and stability of CuAlBe and NiTi alloys", J. of Materials Engineering and Performance_ASM Internacional, DOI: 10.1007/s11665-009-9442-6.
  20. Torra, V., Isalgue, A., Auguet, C., Lovey, F., Pelegrina, J.L. and Terriault, P. (2007a), "Pre-stressed NiTi: effects of the thermodynamic forces and time", Proc. SMST, Tsukuba.
  21. Torra, V., Isalgue, A., Martorell, F., Casciati, F., Lovey, F.C., Peigney, M., Terriault, P., Tirelli, D. and Zapico, B. (2009c), "SMA in mitigation of extreme loads in civil engineering: damping of earthquake effects in family houses and in wind/rain perturbations on stayed cables in bridges", Proc. PROTECT2009, Japan.
  22. Torra, V., Isalgue, A., Martorell, F., Terriault, P. and Lovey, F.C. (2007b), "Built in dampers for family homes via SMA: An ANSYS computation scheme based on mesoscopic and microscopic experimental analyses", Engineering Structures 29, 1889-1902. https://doi.org/10.1016/j.engstruct.2006.08.028
  23. Wollants, P., Roos, J.R. and Delaey, L. (1993), "Thermally-induced and stress-induced thermoelastic martensitic transformations in the reference frame of equilibrium thermodynamics", Progr. Mater. Sci., 37(3), 227-288. https://doi.org/10.1016/0079-6425(93)90005-6

피인용 문헌

  1. A review of shape memory alloy research, applications and opportunities vol.56, 2014, https://doi.org/10.1016/j.matdes.2013.11.084
  2. Robust design of a shape memory actuator with slider and slot layout and passive cooling control 2016, https://doi.org/10.1007/s00542-016-2998-9
  3. Performance assessment of buildings isolated with S-FBI system under near-fault earthquakes vol.17, pp.5, 2016, https://doi.org/10.12989/sss.2016.17.5.709
  4. Seismic resilience timber connection-adoption of shape memory alloy tubes as dowels vol.24, pp.10, 2017, https://doi.org/10.1002/stc.1980
  5. Shape Memory Alloy Cables for Structural Applications vol.28, pp.4, 2016, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001457
  6. Damping and frequency of a model cable attached with a pre-tensioned shape memory alloy wire: Experiment and analysis vol.25, pp.2, 2018, https://doi.org/10.1002/stc.2106
  7. Metastable effects on martensitic transformation in SMA vol.112, pp.2, 2013, https://doi.org/10.1007/s10973-012-2585-y
  8. Functional Fatigue of Polycrystalline Cu-Al-Mn Superelastic Alloy Bars under Cyclic Tension vol.28, pp.5, 2016, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001417
  9. Experimental analysis of the quasi-static and dynamic torsional behaviour of shape memory alloys vol.49, pp.1, 2012, https://doi.org/10.1016/j.ijsolstr.2011.09.009
  10. A simple and efficient 1-D macroscopic model for shape memory alloys considering ferro-elasticity effect vol.16, pp.4, 2015, https://doi.org/10.12989/sss.2015.16.4.641
  11. Investigation on the fatigue performance of Ni-Ti thin wires vol.24, pp.1, 2017, https://doi.org/10.1002/stc.1855
  12. Effect of hysteretic properties of SMAs on seismic behavior of self-centering concentrically braced frames 2017, https://doi.org/10.1002/stc.2110
  13. A European Association for the Control of Structures joint perspective. Recent studies in civil structural control across Europe vol.21, pp.12, 2014, https://doi.org/10.1002/stc.1652
  14. Long-time storage effects on shape memory alloy wires 2017, https://doi.org/10.1007/s00707-017-1993-2
  15. Advanced materials for control of post-earthquake damage in bridges vol.24, pp.2, 2015, https://doi.org/10.1088/0964-1726/24/2/025035
  16. Pulse width modulation as energy-saving strategy of shape memory alloy based smart soft composite actuator vol.18, pp.6, 2017, https://doi.org/10.1007/s12541-017-0106-4
  17. Thermally modulated shape memory alloy friction pendulum (tmSMA-FP) for substantial near-fault earthquake structure protection vol.24, pp.11, 2017, https://doi.org/10.1002/stc.2021
  18. On the NiTi wires in dampers for stayed cables vol.13, pp.3, 2014, https://doi.org/10.12989/sss.2014.13.3.353
  19. Semi-active vibration control device based on superelastic NiTi wires vol.20, pp.6, 2013, https://doi.org/10.1002/stc.1500
  20. Mechanical properties and theoretical modeling of self-centering shape memory alloy pseudo-rubber vol.20, pp.11, 2011, https://doi.org/10.1088/0964-1726/20/11/115008
  21. Dynamic analysis of a historical monument: retrofit using shape memory alloy wires vol.13, pp.3, 2014, https://doi.org/10.12989/sss.2014.13.3.375
  22. Seismic Fragility Assessment of Concrete Bridge Pier Reinforced with Superelastic Shape Memory Alloy vol.31, pp.3, 2015, https://doi.org/10.1193/112512EQS337M
  23. Feasibility of tension braces using Cu-Al-Mn superelastic alloy bars vol.21, pp.10, 2014, https://doi.org/10.1002/stc.1644
  24. Shape-memory alloys as macrostrain sensors vol.24, pp.1, 2017, https://doi.org/10.1002/stc.1860
  25. Local effects induced by dynamic load self-heating in NiTi wires of shape memory alloys 2017, https://doi.org/10.1002/stc.2134
  26. Testing and modelling of shape memory alloy plates for energy dissipators vol.14, pp.5, 2014, https://doi.org/10.12989/sss.2014.14.5.883
  27. SMA Dampers for Cable Vibration: An Available Solution for Oscillation Mitigation of Stayed Cables in Bridges vol.78, pp.1662-0356, 2012, https://doi.org/10.4028/www.scientific.net/AST.78.92
  28. Free vibration of a taut cable with a damper and a concentrated mass vol.25, pp.11, 2018, https://doi.org/10.1002/stc.2251
  29. Dynamic performance of a superelastic column-base connection vol.25, pp.7, 2018, https://doi.org/10.1002/stc.2186
  30. An accurate dynamic model for polycrystalline shape memory alloy wire actuators and sensors vol.28, pp.2, 2019, https://doi.org/10.1088/1361-665X/aae3b8
  31. Energy-balance assessment of shape memory alloy-based seismic isolation devices vol.8, pp.4, 2011, https://doi.org/10.12989/sss.2011.8.4.399
  32. Seismic behavior of properly designed CBFs equipped with NiTi SMA braces vol.21, pp.4, 2011, https://doi.org/10.12989/sss.2018.21.4.479
  33. Temperature effect on seismic performance of CBFs equipped with SMA braces vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.495
  34. Seismic vibration control of an innovative self-centering damper using confined SMA core vol.25, pp.2, 2011, https://doi.org/10.12989/sss.2020.25.2.241
  35. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2011, https://doi.org/10.12989/scs.2020.35.2.187
  36. Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS): an engineering solution for practical aseismic isolation with advanced materials vol.26, pp.1, 2011, https://doi.org/10.12989/sss.2020.26.1.089
  37. Thermomechanical and electrical response of a superelastic NiTi shape memory alloy cable vol.31, pp.19, 2011, https://doi.org/10.1177/1045389x20943952