DOI QR코드

DOI QR Code

Modeling of triple concave friction pendulum bearings for seismic isolation of buildings

  • Yurdakul, Muhammet (Department of Civil Engineering, Bayburt University) ;
  • Ates, Sevket (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2010.07.11
  • 심사 : 2011.08.17
  • 발행 : 2011.11.10

초록

Seismic isolated building structures are examined in this study. The triple concave friction pendulum (TCFP) is used as a seismic isolation system which is easy to be manufactured and enduring more than traditional seismic isolation systems. In the TCFP, take advantage of weight which pendulum carrying and it's geometry in order to obtain desirable result of seismic isolation systems. These systems offer advantage to buildings which subject to severe earthquake. This is result of damping force of earthquake by means of their internal constructions, which consists of multiple surfaces. As the combinations of surfaces upon which sliding is occurring change, the stiffness and effective friction change accordingly. Additionally, the mentioned the TCFP is modeled as of a series arrangement of the three single concave friction pendulum (SCFP) bearings. A two dimensional- and eight- story of a building with and without isolation system are used in the time history analysis in order to investigate of the effectiveness of the seismic isolation systems on the buildings. Results are compared with each other to emphasize efficiency of the TCFP as a seismic isolation device against the other friction type isolation system like single and double concave surfaces. The values of the acceleration, floor displacement and isolator displacement obtained from the results by using different types of the isolation bearings are compared each other. As a result, the findings show that the TCFP bearings are more effective devices for isolation of the buildings against severe earthquakes.

키워드

참고문헌

  1. Computers and Structures Inc. (2007), SAP2000: Static and Dynamic Finite Element Analysis of Structures, Berkeley, CA, USA.
  2. Fabio, F. and Constantinou, M.C. (2010), "Evaluation of simplified methods of analysis for structures with triple friction pendulum isolators", Earthq. Eng. Struct. D., 39, 5-22.
  3. Fenz, D.M. and Constantinou, M.C. (2008b), "Spherical sliding isolation bearings with adaptive behavior: theory", Earthq. Eng. Struct. D., 37, 163-183. https://doi.org/10.1002/eqe.751
  4. Fenz, D.M. and Constantinou, M.C. (2008c), "Modeling triple friction pendulum bearings for response history analysis", Earthq. Spectra, 24, 1011-1028. https://doi.org/10.1193/1.2982531
  5. Fenz, D.M. and Constantinou, M.C. (2008d), "Spherical sliding isolation bearings with adaptive behavior: experimental verification", Earthq. Eng. Struct. D., 37, 185-205. https://doi.org/10.1002/eqe.750
  6. Fenz, D.M. and Constantinou, M.C. (2008a), "Development, implementation and verification of dynamic analysis models for multi-spherical sliding bearings", Technical Report MCEER-08-0018, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY.
  7. Fenz, D.M. and Constantinou, M.C. (2006), "Behaviour of the double concave friction pendulum bearing", Earthq. Eng. Struct. D., 35, 1403-1424. https://doi.org/10.1002/eqe.589
  8. Kelly, J.M. (1999), "The role of damping in seismic isolation", Earthq. Eng. Struct. D., 28(1), 3-20. https://doi.org/10.1002/(SICI)1096-9845(199901)28:1<3::AID-EQE801>3.0.CO;2-D
  9. Khoshnoudian, F. and Rabiei, M. (2010), "Seismic response of double concave friction pendulum base-isolated structures considering vertical component of earthquake", Adv. Struct. Eng., 13(1), 1-14. https://doi.org/10.1260/1369-4332.13.1.1
  10. Kim, Y.S. and Yun, C.B. (2007), "Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior", Eng. Struct., 29, 3082-3093. https://doi.org/10.1016/j.engstruct.2007.02.009
  11. Lin, B.C. and Tadjbakhsh, I.G. (1986), "Effect of vertical motion on friction driven systems", Earthq. Eng. Struct. D., 14, 609-622. https://doi.org/10.1002/eqe.4290140409
  12. Morgan, T.A. and Mahin, S.A. (2008), "Performance-based design of seismic isolated buildings considering multiple performance objectives", Smart Struct. Syst., 4(5), 655-666. https://doi.org/10.12989/sss.2008.4.5.655
  13. Mostaghel, N. and Tanbakuchi, J. (1983), "Response of sliding structures to earthquake support motion", Earthq. Eng. Struct. D., 11, 729-748. https://doi.org/10.1002/eqe.4290110603
  14. Panchal, V.R., Jangid, R.S., Soni, D.P. and Mistry, B.B. (2010), "Response of the double variable frequency pendulum isolator under triaxial ground excitations", J. Earthq. Eng., 14, 527-558. https://doi.org/10.1080/13632460903294390
  15. Soni, D.P., Mistry, B.B. and Panchal, V.R. (2010), "Behaviour of asymmetric building with double variable frequency pendulum isolator", Struct. Eng., 34(1), 61-84.
  16. Tsai, C.S. and Lin, Y.C. (2009), "Mechanical Characteristics and Modeling of Multiple Trench Friction Pendulum System with Multi-intermediate Sliding Plates", World Academy of Science, Engineering and Technology J: Mechanical and Aerospace Engineering, 4(1), 39-51.
  17. Tsai, C.S., Chen, W.S. and Chiang, T.C. (2010), "Experimental and numerical studies of trench friction Pendulum system", Struct. Eng. Mech., 34(2), 277-280. https://doi.org/10.12989/sem.2010.34.2.277
  18. Tsai, C.S., Chiang, T.C. and Chen, B.J. (2003), "Finite element formulations and theoretical study for variable curvature friction pendulum system", Eng. Struct., 25, 1719-1730. https://doi.org/10.1016/S0141-0296(03)00151-2
  19. Zayas, V.A., Low, S.S. and Mahin, SA. (1990), "A simple pendulum technique for achieving seismic isolation", Earthq. Spectra, 6, 317-334. https://doi.org/10.1193/1.1585573
  20. Zekioglu, A., Darama, H. and Erkus, B. (2009), "Performance-based seismic design of a large seismically isolated structure: istanbul sabiha gokcen international airport terminal building", Structural Engineering Association of California Convention Proceedings, 409-427.

피인용 문헌

  1. Full-scale tests and analytical model of the Teflon-based lead rubber isolation bearings vol.48, pp.6, 2013, https://doi.org/10.12989/sem.2013.48.6.809
  2. Evaluation of a DDB design method for bridges isolated with triple pendulum bearings vol.59, pp.5, 2016, https://doi.org/10.12989/sem.2016.59.5.803
  3. Comparison of the dynamic responses of Gülburnu Highway Bridge using single and triple concave friction pendulums vol.7, pp.4, 2014, https://doi.org/10.12989/eas.2014.7.4.511
  4. Comparing the dynamic behavior of a hospital-type structure with fixed and isolated base vol.9, pp.3, 2015, https://doi.org/10.12989/eas.2015.9.3.657
  5. Nonlinear dynamic analysis of base isolated cable-stayed bridge under earthquake excitations vol.66, 2014, https://doi.org/10.1016/j.soildyn.2014.07.013
  6. Effects of vertical component of near-field ground motions on seismic responses of asymmetric structures supported on TCFP bearings vol.20, pp.6, 2011, https://doi.org/10.12989/sss.2017.20.6.641
  7. Cyclic behaviour of triple friction pendulum isolators with elliptical surfaces vol.174, pp.3, 2011, https://doi.org/10.1680/jstbu.18.00186
  8. Three-Dimensional Seismic Isolation Study of Single-Layer Reticulated Domes by Parameter Analysis vol.21, pp.6, 2021, https://doi.org/10.1007/s13296-021-00545-3
  9. Determination of seismic isolation effects on irregular RC buildings using friction pendulums vol.34, pp.None, 2011, https://doi.org/10.1016/j.istruc.2021.09.062