A Study on Digital design process of the materialization of Free form Design Architecture

비정형 건축 구현을 위한 디지털 디자인 프로세스에 관한 연구

  • Received : 2011.03.03
  • Accepted : 2011.05.06
  • Published : 2011.06.25

Abstract

Starting in modern times by Le Corbusier, architectures made by concretes are still developing in these times. For several decades, the shape of box architecture has been the most familiar type of buildings. Of course "The concrete is the type of box building" isn't always right, but what we have most seen was the buildings which has been stylized and made by concretes. Through modern times to these days based on international style and functionalism, the type of box building was the most effective and good profit type of architecture which has not disregarded the capitalism. Free-form building are becoming a common place, and many of these are designed and constructed using sophisticated techniques. The main technique being used is Generative Technology of Form for free-form construction. People's interest is growing in this, and it is becoming widely used both abroad and domestically. The purpose of this paper is to investigate the use of Generative Technology of Form which is a digitally adapted design methodology in architecture. The digital design process used for contemporary buildings share many typical features that exist within a standard digital template, but also an increasing amount of mass customization that has to be produced at an additional cost. This paper will summarize these features in terms of free-form architecture, and in terms of the digital design process. In fact, 3D models have to be conceded as main design products considering features of Free Form Design Architecture. However it is practical to design twice over, because all forms of architectural drawings are 2D. From now on, design of Free Form Design Building is not to separate between design process and practical process, but to compound them as unified design system applied the process to communicate information interactively. For this, it should be required to impose unified digital design process and perform researches about effective way to apply in the field of Free-form Design Architecture.

Keywords

References

  1. 밀프레드 프리드먼, "Gehry Talks : Architecture +Process , 미메시스, 2010
  2. 빌딩스마트 협회, "The BIM", Spring 2009
  3. Farshid Moussavi, "The Function of Formt", Harvard University, 2009
  4. Farshid Moussavi & Michael Kubo, "The Function of Ornament", Harvard University, 2008
  5. 김영균, 비정형건축의 구축과 디지털기술에 대한 연구, 한양대학교 건축대학원 ,2006
  6. 박정대, 디지털 미디어에 의한 건축디자인 프로세스의 변화에 대한 연구, 대한건축학회논문집 22권1호, 2006
  7. 박정대, 구축과 관련된 디지털 기법의 특성에 관한 연구, 대한건축학회논문집, 21권 12호, 2005.12
  8. 박정대, 곡면형상의 구축을 위한 디지털기술과 건축디자인 프로세스, 서울대학교 대학원, 2005.5
  9. 박정대, 김진균, '프랭크게리의 디지털 디자인 프로세스에 관한 연구', 대한건축학괴 논문집, 20권 10호, 2004.10
  10. 김석태, '비선형 공간구성의 특징에 기초한 디지털 건축 지자인의 기술적 유형 연구', 디자인학연구, 2003.12