반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

대면적 UV 임프린팅 공정에서 유연 몰드의 변형

Soft Mold Deformation of Large-area UV Impring Process

  • 김남웅 (동양미래대학 기계공학부) ;
  • 김국원 (순천향대학교 공과대학 기계공학과)
  • Kim, Nam-Woong (School of Mechanical Engineering, Dongyang Mirae University) ;
  • Kim, Kug-Weon (Dept. of Mechanical Engineering, Soonchunhyang University)
  • 투고 : 2011.11.08
  • 심사 : 2011.12.15
  • 발행 : 2011.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently there have been considerable attentions on nanoimprint lithography (NIL) by the display device and semiconductor industry due to its potential abilities that enable cost-effective and high-throughput nanofabrication. Although one of the current major research trends of NIL is large-area patterning, the technical difficulties to keep the uniformity of the residual layer become severer as the imprinting area increases more and more. In this paper we focused on the deformation of the $2^{nd}$ generation TFT-LCD sized ($370{\times}470mm^2$) large-area soft mold in the UV imprinting process. A mold was fabricated with PDMS(Poly-dimethyl Siloxane) layered glass back plate(t0.5). Besides, the mold includes large surrounding wall type protrusions of 1.9 mm width and the via-hole(7 ${\mu}m$ diameter) patterend area. The large surrounding wall type protrusions cause the proximity effect which severely degrades the uniformity of residual layer in the via-hole patterend area. Therefore the deformation of the mold was calculated by finite element analysis to assess the effect of large surrounding wall type protrusions and the flexiblity of the mold. The deformation of soft mold was verified by the measurements qualitatively.

키워드

참고문헌

  1. Chou, S. and Krauss, P., "Imprint lithography with sub-10nm feature size and high throughput," Microelectronic Engineering., Vol. 35, pp. 237-240, 1997. https://doi.org/10.1016/S0167-9317(96)00097-4
  2. Guo, L. J., "Recent progress in nanoimprint technology and its applications," J. Phys. D: Appl. Phys., Vol. 37, pp. R123-R141, 2004. https://doi.org/10.1088/0022-3727/37/11/R01
  3. Kim, N. W., Kim, K. W., and Sin, H.-C., "Finite element analysis of low temperature thermal nanoimprint lithography using a viscoelastic model," Microelectronic Engineering., Vol. 85, pp. 1858-1865, 2008. https://doi.org/10.1016/j.mee.2008.05.030
  4. Kim, N. W., Kim, K. W., and Sin, H.-C., "A mathematical model for slip phenomenon in a cavity-filling process of nanoimprint lithography," Microelectronic Engineering., Vol. 86, pp. 2324-2329, 2009. https://doi.org/10.1016/j.mee.2009.04.011
  5. Heyderman, L. J., Schift, H., David, C., Gorbrecht, J., and Schweizer, T., "Flow behaviour of thin polymer films used for hot embossing lithography," Microelectronic Engieering, Vol. 54, pp. 229-245, 2000. https://doi.org/10.1016/S0167-9317(00)00414-7
  6. Ahn, S. H. and Guo, L. J., "High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates," Advanced Materials, Vol. 20, pp. 2044-2049, 2008. https://doi.org/10.1002/adma.200702650
  7. 김남웅, 김국원, 이우영, "대면적 UV 임프린팅 공정에서 고무 롤러에 의한 압력분포," 반도체디스플레이기술학회지, 제 9권, pp. 91-96, 2010.
  8. Bae, J., Kim, Chang, J., and Lim, S., "Large area UV nanoimprint lithography for TFT-LCD devices," Proceeding of The 7th International Conference on Nanoimprint and Nanoprint Technology, pp. 186-187, 2008.
  9. Kim, N. W., Kim, K. W., and Kang, D. J., "Analysis of shadow mask thermal deformation and prediction of beam landing shift for color CRT," IEEE Transactions of Consumer Electronics, Vol. 44, pp. 442-450, 1998. https://doi.org/10.1109/30.681963
  10. Treloar, L. R. G., "The Physics of Rubber Elasticity," 3rd Ed., Clarendon, Oxford., 1975.