참고문헌
- 이양두, 주병권, 신경, "자동차의 안전성과 환경을 위한 센서의 응용 현황", 전자공학회지, 제37권 제5호, 38-47쪽, 2010년 5월
- 김청월, 이병렬, 이상우, 최준혁, "진동형 각속도 검출 센서를 위한 애널로그 신호처리 ASIC의 구현", 전자공학회논문지-SD, 제40권 제4호, 65-73쪽, 2003년 4월
- 이병렬, "마이크로 관성센서 기술", 전자공학회지, 제28권, 제10호, 39∼44쪽, 2001년 10월
- J. J. Allen, "Micro-System Inertial Sensing Technology Overview", SANDIA REPORT SAND2009-3080, Sandia National Laboratories, 2009.
- N. Yazdi, F. Ayazi, K. Najafi, "Micromachined inertial sensors", Proc. IEEE, Vol. 86, no. 8, pp. 1640-1659, August 1998. https://doi.org/10.1109/5.704269
- M. Lemkin, et al., "A three-axis micromachined accelerometer with a CMOS positionenseinterface and digital offset-trim electronics", IEEE J. Solid-State Circuits, Vol. 34, no. 4, pp. 456-468, April 1999. https://doi.org/10.1109/4.753678
- W. Bracke, et al., "On the optimization of ultra low power front-end interfaces for capacitive sensors", Sensor. Actuat. A-Phys., Vol. 117, no. 2, pp. 273-285, January 2005. https://doi.org/10.1016/j.sna.2004.06.011
- S. Callegari, et al., "Applicability of Field Programmable Analog Arrays to Capacitive Sensing in the Sub-pF Range", Analog Integr. Circ. S., vol. 47, no. 1, pp. 39-51, January 2006. https://doi.org/10.1007/s10470-006-2776-1
- S. Bangalore, et al., "A fully differential rail-to-rail CMOS capacitance sensor with floating-gate trimming for mismatch compensation", IEEE Trans. Circuits Syst. I, Reg. Papers, Vol. 56, no. 5, pp. 975-986, May 2009. https://doi.org/10.1109/TCSI.2009.2015202
- A. Lee, H. Ko., D. Cho, G. Hwang, "Non-ideal behavior of a driving resonator loop in a vibratory capacitive microgyroscope", Microelectronics Journal, Vol. 39, no. 1, pp. 1-6, January 2008 https://doi.org/10.1016/j.mejo.2007.10.025
- A. Sharma, M. F. Zaman, F. Ayazi, "A 104-dB Dynamic Range Transimpedance-Based CMOS ASIC for Tuning Fork Microgyroscopes", IEEE J. Solid-State Circuits, Vol. 42, no. 8, pp. 1790-1802, August 2007. https://doi.org/10.1109/JSSC.2007.900282
- A. Sharma, M. F. Zaman, F. Ayazi, "A Sub-0.2 deg/hr Bias Drift Micromechanical Silicon Gyroscope With Automatic CMOS Mode-Matching", IEEE J. Solid-State Circuits, Vol. 44, no. 5, pp. 1593-1608, May 2009. https://doi.org/10.1109/JSSC.2009.2016996
- S. E. Alper, Y. Temiz, T. Akin, "A Compact Angular Rate Sensor System Using a Fully Decoupled Silicon-on-Glass MEMS Gyroscope", IEEE/ASME J. Microelectromech., Vol. 17, no. 6, pp. 1418-1429, December 2008. https://doi.org/10.1109/JMEMS.2008.2007274
- C. D. Ezekwe, B. E. Boser, "A Mode-Matching Closed-Loop Vibratory Gyroscope Readout Interface With a 0.004 deg/s Noise Floor Over a 50 Hz Band", IEEE J. Solid-State Circuits, Vol. 43, no. 12, pp. 3039-3048, February 2008. https://doi.org/10.1109/JSSC.2008.2006465
- H. Chang, et al., "Integrated Behavior Simulation and Verification for a MEMS Vibratory Gyroscope Using Parametric Model Order Reduction", IEEE/ASME J. Microelectromech., Vol. 19, no. 2, pp. 282-293, April 2010. https://doi.org/10.1109/JMEMS.2009.2038284
- J. Kim, et al., "An X-Axis Single-Crystalline Silicon Microgyroscope Fabricated by the Extended SBM Process", IEEE/ASME J. Microelectromech., Vol. 14, no. 3, pp. 444-455, June 2005. https://doi.org/10.1109/JMEMS.2005.844799
- H. Ko, D. Cho, "Highly programmable temperature compensated readout circuit for capacitive microaccelerometer", Sensor. Actuat. A-Phys., Vol. 158, no. 1, pp. 72-83, March 2010 https://doi.org/10.1016/j.sna.2009.12.017
- IEEE Std 952-1997, "IEEE Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros", Annex C, 1998.