마이크로프로세서 디지털 입력포트에 대한 히스테리시스 특성 부여방법에 관한 연구

A Study on the Method of Giving Hysteresis Characteristics to the Digital input port of Microprocessors

  • 이현창 (국립 공주대학교 정보통신공학부)
  • Lee, Hyun-Chang (Dept. of Information and Telecommunication Engineering, Kongju National University)
  • 투고 : 2009.09.08
  • 심사 : 2011.03.10
  • 발행 : 2011.03.25

초록

본 논문에서는 마이크로프로세서의 디지털 입력포트에 히스테리시스 특성을 부여하는 방법 및 설계 순서를 제시하고 이를 실험해 그 효과를 확인하였다. 프로세서의 잉여포트가 있을 때 제시한 방법을 이용하면 저항 2개의 추가만으로 히스테리시스 특성을 얻을 수 있으며, 더구나 기존의 TTL과 CMOS의 슈미트 트리거 게이트에 비해 큰 히스테리시스 폭을 얻을 수 있다.

This paper presents the method of giving hysteresis characteristics to the digital input port of microprocessors or micro-controllers and it's design procedures. And this paper shows the example of circuit design and the effect of this method by experiments. Presented method has advantages : By the additional one port and two resistors, input port can have hysteresis characteristics and hysteresis band is larger than TTL, CMOS schmitt trigger gates.

키워드

참고문헌

  1. Frank Vahid and Tony Givargis, Embedded System Design - A Unified Hardware/Software Introduction, pp. 1-25, John Wiley & Sons, 2002.
  2. Steven F. Barrett and Daniel J. Pack, Embedded Systems - Design and Applications, pp. 1-8, Pearson Prentice-Hall, 2005.
  3. M. Morris Mano, Digital Logic and Computer Design, pp. 26-29, Prentice-Hall, 1984.
  4. John B. Peatman, Design with Microcontrollers, pp.34-43, p.552, McGraw-Hill, 1989.
  5. Motorola Inc., CMOS Integrated Circuits Data-book, pp.195-198, Motorola Inc.,
  6. National Semiconductor, ナショナル半道体ハンドブック- バイポラ ディジタルIC, pp. 85-86, National Semiconductor.
  7. Albert Malvino and David J. Bates, Electronic Principles, pp. 856-861, McGraw-Hill, 2007.
  8. National Semiconductor, Linear Databook, Vol.I, pp. 541-547, National Semiconductor.
  9. Robert Boylestad and Louis Nashelsky, Electronic Devices and Circuit Theory, pp. 165-169, Prentice-Hall, 1992.