DOI QR코드

DOI QR Code

Source Location of Multiple Impacts on the Plate Based on Pre-signal Processing

전치 신호처리를 통한 평판에서의 다중 충격의 위치 추적에 관한 연구

  • Received : 2010.10.13
  • Accepted : 2011.01.20
  • Published : 2011.03.20

Abstract

This paper presents the novel work for source localization of serial multiple impacts in a plate sructure. It is difficult to identify the source of serial multiple impacts with the current source localization techenology(SLT) because of the overlapping of dispersive wave induced by multiple impacts and the reflaction from the edge of the plate. In this paper, the new method is suggested for source localization. The method is developed based on the SLT with pre-signal processing such as some limitation for the selection of three sensors, the frequency range for TFA and impact time interval. Results from numerical simulation and experiment in isotropic plate structure are presented, which show the capability of the proposed method.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Kishimoto, K., Inoue, H., Hamada, M. and Shibuya, T., 1995, Time Frequency Analysis of Dispersive Waves by Means of Wavelet Transform, J. Appl. Mech., Vol. 62, Issue 4, pp. 841-846. https://doi.org/10.1115/1.2896009
  2. Gaul, L. and Hurlebaus, S., 1997, Identification of the Impact Location a Plate Using Wavelets, Mech. Sys. Signal Process, Vol. 12, Issue 6, pp. 783-795.
  3. Prosser, H., Seale, M. D. and Smith, T. B., 1999, Time-frequency Analysis of the Dispersion of Lamb Modes, J. Acoust. Soc. Am., Vol. 105, Issue 5, pp. 2669-2676. https://doi.org/10.1121/1.426883
  4. Jeong, H. and Jang, Y. S., 2000, Fracture Source Localization in Thin Plates Using the Wavelet Transform of Dispersive Waves, IEEE Tran. Ultra. Ferroelectr. Freq. Control, Vol. 47, pp. 612-619. https://doi.org/10.1109/58.842048
  5. Loutridis, S., Douka, E., Hadjileontiadis, L. J., and Torchidis, A., 2005, A Two Dimensional Wavelet Transform for Detection of Cracks in Plates, Engineering Structure, Vol. 27, Issue 9, pp. 1327-1338. https://doi.org/10.1016/j.engstruct.2005.03.006
  6. Park, J. H. and Kim, Y. H., 2006, Impact Source Localization on an Elastic Plate in a Noisy Environment, Measurement Science Technology, Vol. 17, No. 10, pp. 2757-2766. https://doi.org/10.1088/0957-0233/17/10/030
  7. Lee, S. K., Banerjee, S. and Mal, A., 2007, Identification of Impact Force on a Thick Plate Based on the Elastodynamic and Higher-order Time-frequency Analysis, Proc. IMechE Part C, J. Mechanical Engineering Science, Vol. 221, No. 11, pp. 1249-1263. https://doi.org/10.1243/09544062JMES674
  8. Fonollosa, J. R. and Nikias, C. L., 1993, Wigner-higher-order Moment Spectra Definition, Properties, Computation and Application to Transient Signal Analysis, IEEE Transactions on Signal Processing, Vol. 41, No. 1, pp. 245-266. https://doi.org/10.1109/TSP.1993.193143
  9. Graff, K. F., 1953, Wave Motion in Elastic Solids, Dover Publications Inc., New York.
  10. Tobis, A., 1976, Acoustic Emission Source Location in Two Dimensions by an Array of Three Sensors, Non-destructive Testing, Vol. 9, Issue 1, pp. 9-12. https://doi.org/10.1016/0029-1021(76)90027-X
  11. Choi, K. S., Choi, Y. C., Park, J. H. and Kim, W. W., 2008, Source Localization Technique for Metallic Impact Source by Using Phase Delay between Different Type Sensors, Transactions of the Korean Society for Noise and Vibration Engineering. Vol. 18, No. 11, pp. 1143-1149. https://doi.org/10.5050/KSNVN.2008.18.11.1143

Cited by

  1. Comparative Study on the Measures of Similarity for the Location Template Matching(LTM) Method vol.24, pp.4, 2014, https://doi.org/10.5050/KSNVE.2014.24.4.310