한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제21권3호
  • /
  • Pages.199-205
  • /
  • 2011
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

열간 압연 설비의 고장 예지를 위한 프레임워크 구축

Framework Development for Fault Prediction in Hot Rolling Mill System

  • 손종덕 (두산중공업 풍력기술개발팀) ;
  • 양보석 (부경대학교 기계자동차공학과) ;
  • 박상혁 (포항산업과학연구원 신뢰성평가실)
  • 투고 : 2010.01.12
  • 심사 : 2011.01.28
  • 발행 : 2011.03.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper proposes a framework to predict the mechanical fault of hot rolling mill system (HRMS). The optimum process of HRMS is usually identified by the rotating velocity of working roll. Therefore, observing the velocity of working roll is relevant to early know the HRMS condition. In this paper, we propose the framework which consists of two methods namely spectrum matrix which related to case-based fast Fourier transform(FFT) analysis, and three dimensional condition monitoring based on novel visualization. Validation of the proposed method has been conducted using vibration data acquired from HRMS by accelerometer sensors. The acquired data was also tested by developed software referred as hot rolling mill facility analysis module. The result is plausible and promising, and the developed software will be enhanced to be capable in prediction of remaining useful life of HRMS.

키워드

참고문헌

  1. Cowling, P., 2003, A Flexible Decision Support System for Steel Hot Rolling Mill Scheduling, Computers & Industrial Engineering, Vol. 45, No. 2, pp. 307-321. https://doi.org/10.1016/S0360-8352(03)00038-X
  2. Manabu, K. and Yoshiaki, N., 2008, Data-based Process Monitoring, Process Control, and Quality Improvement: Recent Developments and Applications in Steel Industry, Computers and Chemical Engineering, Vol. 32, No. 1-2, pp. 12-24. https://doi.org/10.1016/j.compchemeng.2007.07.005
  3. Heng, A., Zhang, S., Tan, A. C. C. and Mathew, J., 2009, Rotating Machinery Prognostics: State of the Art, Challenges and Opportunities, Mechanical Systems and Signal Processing, Vol. 23, No. 3, pp. 724-739. https://doi.org/10.1016/j.ymssp.2008.06.009
  4. Tran, V. T. and Yang, B. S., 2008, Fault Diagnosis of Induction Motor Based on Decision Trees and Adaptive Neuro-fuzzy Inference, Expert Systems with Application, Vol. 36, No. 2, pp. 1840-1849.
  5. Jardine, A. K. S., Lin, D. and Banjevic, D., 2006, A Review on Machinery Diagnostics and Prognostics Implementing Condition-based Maintenance, Mechanical Systems and Signal Processing, Vol. 20, No. 7, pp. 1483-1510. https://doi.org/10.1016/j.ymssp.2005.09.012
  6. Al-Najjar, B., 2000, Accuracy, Effectiveness and Improvement of Vibration-based Maintenance in Paper Mills: Case Studies, Journal of Sound and Vibration, Vol. 229, No. 2, pp. 389-410. https://doi.org/10.1006/jsvi.1999.2492
  7. Deshpande, V. S. and Modak, J. P., 2003, Maintenance Strategy for Tilting Table of Rolling Mill Based on Reliability Considerations, Reliability Engineering and System Safety, Vol. 80, No. 1, pp. 1-18. https://doi.org/10.1016/S0951-8320(02)00152-7
  8. McElroy, L., Bao, J., Yang, R. Y. and Yu, A. B., 2009, A Soft-sensor Approach to Flow Regime Detection for Milling Processes, Power Technology, Vol. 188, No. 3, pp. 234-241. https://doi.org/10.1016/j.powtec.2008.05.002
  9. Singh, G. R. P., Paul, A. K., Chaterjee, A. K., Ganesh, P. S. S. and Mishra, C., 2009, Improving Equipment Availability and Reliability Through Condition Monitoring at Cold Rolling Mill Complex of Tata Steel, http://www.reliabilityweb.com
  10. Yang, B. S., Han, T. and An, J. L., 2004, ART-Kohonen Neural Network for Fault Diagnosis of Rotating Machinery, Mechanical Systems and Signal Processing, Vol. 18, No. 3, pp. 645-657. https://doi.org/10.1016/S0888-3270(03)00073-6