펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지

습부압착에 따른 수초지의 치수안정성과 침지신장성의 변화

Change of Dimensional Stability and Dip Elongation of Handsheets Depending on Wet Pressing

  • 박창순 (한국 알스트롬 기술연구소) ;
  • 이진호 (한국화학연구원 산업바이오화학연구센터) ;
  • 길정하 (한국조폐공사 기술연구원) ;
  • 박종문 (충북대학교 농업생명환경대학 임산공학과)
  • Park, Chang-Soon (Ahlstrom Korea) ;
  • Lee, Jin-Ho (Korea Research Institute of Chemical Technology, Chemical Biotechnology Research Center) ;
  • Kil, Jung-Ha (KOMSCO, Technical Research Institute) ;
  • Park, Jong-Moon (Chungbuk National University, College of Agriculture, Life & Environment Science, Department of Forest Products & Engineering)
  • 투고 : 2011.11.11
  • 심사 : 2011.12.21
  • 발행 : 2011.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

One of the main drawbacks of wood fibers based composite materials are their tendency to swell due to moisture uptake in wet and moist environments. The main contribution to the hygroexpansion usually comes from the hydrophilic wood fibers. Recent trend toward the high speed printing, copying, and precision converting precesses demands a high level of dimensional stability under various environmental conditions. The purpose of this study was to investigate the dimensional stability of softwood bleached kraft pulp handsheets depending on wet pressing conditions. By increasing the number of wet pressing, dimensional stability was decreased because of increased fiber-to-fiber bonding. Hygroexpansion of handsheets had a linear relationship with the relative bonded area and equilibrium moisture contents. Dip elongation was decreased when the number of wet pressing was increased because of increased fiber-to-fiber bonding to resist low load in water.

키워드

참고문헌

  1. KS M ISO 8226-1:2008, 종이 및 판지-흡습팽윤도 측정-1부 : 최대상대습도 68%까지의 흡습팽윤도.
  2. Larsson, P., Hygro- and hydroexpansion of paper, Doctoral Thesis, KTH Royal Ins. of Technology, Sweden, (2010).
  3. Jarrell, T.,D., Effect of atmospheric humidity on the moisture content of paper, Paper Trade, J. 85:47-51 (1927).
  4. Leisen, J., Hojjatie, B., Coffin, D., W., Lavrykov, S., A., Ramarao., B., V. and Beckham, H., W., Throughplane diffusion of moisture in paper detected by magnetic resonance imaging, Ind. Eng. Chem. Res., 41:6555-6565 (1978).
  5. Larsson, P. A., and Wagberg Lars, Influence of fibre- fibre joint properties on the dimensional stability of paper, Cellulose 15(4): 515-525 (2008). https://doi.org/10.1007/s10570-008-9203-y
  6. Brecht. W., Hildebrand, W. and Uber die flachenbestandigkeit der Papiere. Das Papier 14(10A):610-624 (1960).
  7. Thalen, N., Kolmodin, H., and Glasare, K. Dimensional changes of newsprint in offset printing, In Moisture-Induces Creep Behaviour of Paper and Board, Fellers, C., and Laufenberg, T. L. (ed.), pp. 149-165, (1994).
  8. Tattari, H., and Niskanen, K., Mechanical deformation of paper in the printing nip, PSC Communication 115, KCL, Helsinki, Finland, (1998).
  9. Tattari, H., and Niskanen, K., Dynamic dimensional changes of paper in the printing nip, PSC Communication 119, KCL, Helsinki, Finland, (1998).
  10. Bostrom, B., How to measure dimensional stability, In PITA Coating Conference, pp. 45-50, (2001).
  11. Ketoja, J. A., Kananen, J., Niskanen, K. J., and Tattari, H., Sorption and web expansion mechanisms, In The Science of Papermaking: Transactions of the 12th Fundamental Research Symposium held in Oxford, Vol. 2, pp.1357-1366, (2001).
  12. Coffin, D. W., The creep response of paper, In Advances in Paper Science and Technology: Transactions of the 13th Fundamental Research Symposium Held in Cambridge Vol. 2, pp.651-747, (2005).
  13. Nordman L., Laboratory investigations into the dimensional stability of paper, Tappi 41:23-30 (1958).
  14. Salmen L., Boman R., Fellers C. and Htun M., The implications of fiber and sheet structure for the hygroexpansivity of paper, Nordic Pulp Paper Res. J. 2:127-131(1987).
  15. Wahlstrom, B. P., Our present understanding of the fundamentals of pressing, P & P Mag. Canada 70:19:T349, Dec. 20, (1969).
  16. Wahlstrom, B. P., Wet pressing in the 20th century: evolution, understanding and future, P & P Mag. Canada 102:12:T133, Dec. (2001).
  17. Reese, R. A., Pressing operations, Pulp and Paper Manufacture, Vol. 7, Paper Machine Operations, Thorp, B. A., and Kocurek, M. J. (ed.), Joint Textbook Committee of the Paper Industry, TAPPI & CPPA, pp. 278-280, (1991).
  18. Baum, G. A., Sheet structure considerations - Paper as an engineered material, Pulp and Paper Manufacture, Vol. 7, Paper Machine Operations, Thorp, B. A., and Kocurek, M. J. (ed.), Joint Textbook Committee of the Paper Industry, TAPPI & CPPA, pp. 69-70, (1991).
  19. Gustafsson, J.-E., and Vomhoff, H., Modelling of mechanical dewatering in contact with rough permeable surfaces, In Advances in Paper Science and Technology: Transactions of the 13th Fundamental Research Symposium Held in Cambridge Vol. 1, pp.109-128, (2005).
  20. McDonald, J. D., Pikulik, I. I., Mentele, C. J. and Lange, D. V., A pilot paper machine evaluation of the effect of pressing on newsprint quality, Tappi J. 81(6):131-137(1998).
  21. Casey, J. P., Pulp and Paper Chemistry and Chemical Technology, Third Ed. Vol II, pp. 1065-1077 (1980).
  22. 명소영, 제지 산업의 기후변화협약 대응방안, 한국펄프종이공학회 2008년 춘계학술논문발표집, pp. 25-37 (2008).
  23. 서동준, 제지업체의 에너지 절감 추진 동향, 2009년 한국펄프종이공학회 콜로퀴엄, pp. 47-67 (2009).
  24. 김은영, 원종명, 습부압착과 건조 조건이 종이의 해리 특성 및 물성에 미치는 영향, J. Korea TAPPI 35(2): 12-17 (2003).
  25. Lee, J. H., and Park, J. M., Influences of Wet-Pressing Types on Internal Structure of Paper, J. Korea TAPPI 37(4):32-37(2005).
  26. 성용주, and Keller, D. S., 습지압착 조건에 따른 압착탈수 공정효율과 종이구조변화, 한국펄프종이공학회 2010년 춘계학술논문발표집, pp. 9-15 (2010).
  27. Back, E., A review of press drying, STFI Meddelande Series D., No. 224, Sept. (1984).