동력기계공학회지 (Journal of Power System Engineering)

  • 제15권6호
  • /
  • Pages.53-58
  • /
  • 2011
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

리클라이너 용 섹터기어의 파인 블랭킹 성형을 위한 금형의 최적화

Optimization of Mold for Fineblanking Forming of Sector Gear for Recliner

  • 이관영 (부경대학교 대학원 학연협동기계공학과) ;
  • 남기우 (부경대학교 신소재공학부) ;
  • 문창권 (부경대학교 신소재공학부)
  • 투고 : 2011.04.25
  • 심사 : 2011.08.11
  • 발행 : 2011.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To optimization of mlod for fineblanking forming of sector gear of recliner, it was analyzed the effect of clearance, V-ring height, V-ring position, blank holding force and counter punch force. In case of 0.003 mm of clearancs, the finest shear plane was obtained, but optimization between die and punch clearance was 0.005 mm. The height of V-ring was 0.7 mm. In case of increasing of hold force, the size of shear plane got better and the decrement of thickness became smaller. Both the size of shear plane and the decrement of thickness increased according to increasing of counter punch force.

키워드

참고문헌

  1. The Committee on Fine Blanking, 2010, "Fineblanking Handbook", pp. 7-16.
  2. Kim, M. C., 1988, "Development of FB Die & Technology by General Press", Research Report of Korea Institute of Machinery and Materials.
  3. Lange,K., 1987, "The potential of the fine blanking technique," Feintool AG, Lyssm, Swiss, pp. 1-6.
  4. Han, K. T., 1998, "Effect of Material and Vee-ring for Processed Products by Fineblanking", J. Spring Meeting of KSME, pp. 202-207.
  5. Ryu, B. Y., 1990, "Molding of Fine Blanking", Sungandang, pp. 1-4.
  6. The Japan Institute of Light Metal, 2003, "The Manufacturing Technology for An Automotive Lightening", The Nikkan Kogyo Shimbun, LTD., pp. 9-32.
  7. The Committee on Fine Blanking, 2010, "Fineblanking Handbook", pp. 53-61.
  8. Kim, J. H., Ruy, J. G. and Chung W. J., 1996, "Development of Fine Blanking Die with Fluid Chamber and its Application to Production of Circular Blanking in a Hydraulic Press", J. Korean Society of Precision Engineering, Vol. 13, No. 5, pp. 157-163.
  9. Ryu, B. Y., 1990, "Molding of Fine Blanking" Sungandang, pp. 5-20.
  10. T. Guanggi et al., 1993, "Recent Development of Fine Blanking Technology in China." Proceed. 4th Int. Con. on Technology of Plasticity, Beijing, China, pp. 246-250.
  11. Kim, Y. J. Kwak, T. S. and Bae, W. B., 1996, "Finite Element Analysis on Effect of Die Clearance on Shear Planes in Fine Blanking," J. The Korean Society For Technology of Plasticity, Vol. 13, No. 5, pp. 157-163.
  12. Lee, J. G., 1990, "Effect for Processed Characteristics of Products by triangle ring in Fineblanking Forming", Master's Thesis, Graduate School of Mechanical Engineering, Dankook University.
  13. SFTC. DEFORMTM 3D Ver50 User's Manual. 2003.
  14. SFTC. DEFORMTM 2D Ver8.0 User's Manual. 2003.