참고문헌
- Lee, E. S., Kim, J. D., and Hyun, D. H., 1993, "A Study on the Analysis of Stress Distribution by Orthogonal Cutting Chip Model," Trans of the KSME, Vol. 17, No. 12, pp. 2926-2935.
- Sim, G. J., Cheong, C. Y., Oh, S. H., and Seo, N. S., 1995, "A Study on the Classification and Prediction of the Chip Type under the Specified Cutting Conditions in Turning," Journal of the KSPE, Vol. 12, No. 8, pp. 53-62.
- Choi, J. P., and Lee, S. J., 1999, "Chip Breaking Prediction in Turning Process Considering Cutting Conditions and Chip Breaker Parameters," Journal of the KSPE, Vol. 16, No. 9, pp. 191-199.
- Kim, K. W., Ahn, T. K., and Lee, W. Y., 2006, "Finite Element Analysis of an Orthogonal Cutting Process with Low Speed," Journal of the KSMTE, Vol. 5, No. 2, pp. 10-15.
- Sim, K. J. and Mun, S. D., 2006, "Analysis of Chip Thickness Model in Ball-end Milling," KSMTE, Vol. 15, No. 2, pp.73-80.
- Lee, S. Y., Han, J. A., Kim, J. W., Gwak, Y. K., Kang, D. B., and Ahn, J. W., 2010, "Development on Tool Holder of Vibration Cutting System for Ultraprecision Machining," KSMTE, Vol. 20, No. 3, pp.268-273.
- Kim, K. M., Choi, D. K., and Ju, J. N., 1988, "Development of a Minute Electric Discharge Machine for Machining of Shaft Hole," Journal of the Korean Society of Precision Engineering, Vol. 15, No. 12 pp. 55-61.
- Lee, J. W., and Min, K. D, 2006, "A Study on Nozzle Flow and Spray Characteristics of Piezo Injector for Next Generation High Response Injection," Transactions of the KSME(B), Vol. 30, No. 6, pp. 553-559.
- Kim, Y. J.,Park, J. W., and Seo, L. S., 2009, "Effect of Nozzle Geometry on the Suction Flow Rate in a Ejector", Journal of Fluid Machinery, Vol. 12, No. 6, pp. 13-17. https://doi.org/10.5293/KFMA.2009.12.6.013
- Park, S. H., Suh, H. K., and Lee, C. S., 2007, "Effects of Nozzle Length-diameter Ratio on Internal and External Flow Characteristics of Biodiesel Fuel," Transactions of KSAE, Vol. 15, No. 4, pp. 94-100.
- Min, K. T., and Jang, H. S., "Deformation analysis of Tool and Tool Holder for Micromachining by FEM," KSMTE, Vol. 9, No. 1, pp. 87-92.
-
Kwon, K. H., and Chung, W. J., "Stress and Deformation Analysis of a Tool Holder Spindle using
$iSIGHT{\circledR}$ ," Journal of the Korean Society of Precision Engineering, Vol. 27, No. 9, pp. 103-110.