A Study on Select Bearing Position of High Speed Spindle Considering the Thermo Behavior

주축의 열변위를 고려한 초고속 스핀들의 베어링 위치 선정

  • 박수성 (창원대학교 기계설계공학과) ;
  • 정원지 (창원대학교 기계설계공학과)
  • Received : 2011.02.07
  • Accepted : 2011.07.08
  • Published : 2011.12.15

Abstract

The thermal deformation of machine tool spindle influences the performance of the manufacturing systems for precision products. According to previous studies, major factors that will affect the stiffness of the spindle include spindle diameter, elasticity of the material, bearing stiffness and bearing span. It is difficult to change spindle diameter or elasticity of the material. but change of bearing position is easy in the given range compared to other factors. In this paper, we will find a solution to minimize thermal deformation through Change the span of the bearing.

Keywords

References

  1. Lim, J. S., Yu, K. H., Chung, W. J., Kim, S. T., Lee, J. H., and Lee, C. M., 2009, "Thermal Characteristics Analysis of 30,000rpm High Speed Spindle," Journal of the Korean Society of Precision Engineering, Vol. 26, No. 7, pp. 120-126.
  2. Kim, S. T., Kim, C. S., Choi, D. B., Kim, J. H., and Jeong, D. S., "The Temperature Distribution and Thermal Displacement Analysis of the High Speed Spindle According to the Bearing Preloads and Cooling Methods," Engineering Research & Technology, Vol. 5, pp. 13-18.
  3. Lee, C. H., "Thermal Deformation Characteristics and Compensation of High Speed Spindle Unit," Journal of the Korean Society of Precision Engineering, Vol. 19, No. 5, pp. 7-12.
  4. Kim, S. I., Jo, J. W., Lee, W. J., and Lee, Y. H., 2003, "Static/Dynamic/Thermal Characteristics Analysis of a High-speed Spindle System with 50,000rpm," Korean Society of Precision Engineering, spring Conference, pp. 494-499.
  5. Report, 2004, Study of the Clearance Control for High Speed Spindle Bearing and Optimization of Spindle Cooling System, KIMM.
  6. Kreith, F., and Bohn, M. S., 1993, Heat Transfer Fifth Edition, West Info Access, USA, pp. 315-356.
  7. Lim, J. S., Lee C. M., Chung, W. J., and Lee, J. H., 2007, "FEM to Select Bearing Position of 40,000RPM High-speed Spindle," Korean Society of Precision Engineering, Auturm Conference, pp. 637-638.
  8. Hwang, Y. K., and Lee, C. M., 2009, "A Study on the Determination of Shaft Size Using the Extreme Vertices Design," KSMTE, Vol. 18, No. 2, pp. 214-220.
  9. Lee, C. M., Lim, J. S., and Chung, W. J., 2009, "Selection of Bearing Position for Improving Static and Dynamic Stiffness of 40,000rpm High-speed Spindle," KSMPE Vol. 8, No. 1, pp. 100-17.
  10. Hwang, Y. K., and Lee C. M., 2009, "Determination of Shaft Size and Bearing Span Length using the Extreme Vertics Design," KSMTE, Vol. 18 No. 2, pp. 214-220.
  11. Park, K. B., 2009, A Study on Design and Performance Estimation of Super High Speed Spindle using $iSIGHT^{\circledR}$, A Thesis for a Master's degree, Changwon University, Republic of Korea.
  12. Kwon, K. H., 2010, A Study on Optimal Design of the Tool Holder Spindle using $iSIGHT^{\circledR}$, A Thesis for a Master's degree, Changwon University, Republic of Korea.