전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제60권3호
  • /
  • Pages.594-599
  • /
  • 2011
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

새로운 표면탄성파를 이용한 변형률 센서 개발

Development of novel strain sensor using surface acoustic wave

  • 투고 : 2011.01.08
  • 심사 : 2011.02.01
  • 발행 : 2011.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A SAW strain sensor based on Shear Horizontal wave with an 92 MHz central frequency was developed. It consists of SAW sensor, PCB substrate and bonding material (Loctite 401). External force applied to PCB substrate bonded to a piezoelectric substrate induces strain at the substrate surface, which causes changes in the elastic constant and density of the substrate and hence the propagation velocity of the SAW. The change in the velocity of the SAW result in a frequency shift of the sensor and by measuring a frequency shift, we can extract the strain induced by the external force. The $41^{\circ}$ YX $LiNbO_3$ was used because it has a Leaky shear horizontal(SH) wave propagation mode and a high electromechanical coupling coefficient ($K^2$=17.2%). And to compare with Rayleigh wave mode, $128^{\circ}$ YX $LiNbO_3$ was used. And to make a stable and low insert loss, Split IDT structure was used. The obtained sensitivity and linearity of the SAW strain sensor in the case of Split IDT were measured to be 17.2 kHz / % and 0.99, respectively.

키워드

참고문헌

  1. Schedin E and Melander A. "The evaluation of large strains from industrial sheet metal stampings with a square grid", J. Appl. Met. Working, 4, 143-56, 1986.
  2. Claus R O, Gunther M F, Wang A and Murphy K A, "Extrinsic Fabry-Perot sensor for strain and crack opening displacement measurements from -200 to $900^{\circ}C$". Smart Mater. Struct., 1, 237-42, 1992. https://doi.org/10.1088/0964-1726/1/3/008
  3. Liu T and Fernando G F, "A frequency division multiplexed low-finesse fiber optic Fabry-Perot sensor system for strain and displacement measurements", Rev. Sci. Instrum., 71, 1275-8, 2000. https://doi.org/10.1063/1.1150453
  4. R, Matsuzaki, A, Todoroki, "Wireless flexible capacitive sensor based on ultra-flexible epoxy resin for strain measurement of automobile tires," Sensors and Actuators, A 140, 32-42, 2007. https://doi.org/10.1016/j.sna.2007.06.014
  5. R, Matsuzaki, A, Todoroki, "Wireless strain monitoring of tires using electrical capacitance changes with an oscillating circuit," Sensors and Actuators, A 119, 323-331, 2005. https://doi.org/10.1016/j.sna.2004.10.014
  6. V.A. Kalinin, "Passive wireless strain and temperature sensors based on SAW devices", Proc. of IEEE Radio & Wireless Conference, 187-190, 2004
  7. A, Pohl, "The "Intelligent Tire" Utilizing Passive SAW Sensors-Measurement of Tire Friction," IEEE Instrumentation and Measurement, 48, 1041-1046, 1999. https://doi.org/10.1109/19.816111
  8. T.Nomura, T. Kosaka, A. Saitoh, S. Furukawa. "Passive Strain Sensor using SH-SAW Refelctive Delay line", Ferroelectrics, 333, 121-129, 2006. https://doi.org/10.1080/00150190600689753
  9. W. Buff, F. Plath, O. Schmeckebier, M. Rusko, T. Vandahl, H. Luck, F. Moller and D. C. Malocha, "Remote sensor system using passive SAW sensors", 1994 IEEE Ultrason. Symp., pp. 585-588, 1994.
  10. J. Beckley, V. Kalinin, M. Lee, K. Voliansky, "Noncontact torque sensors based on SAW resonators", 2002 IEEE International Frequency Control Symp., pp. 202-213, May 2002.
  11. P.V. Wright, "Analysis and design of low-loss SAW devices with internal reflections using coupling-of-modes theory", IEEE Ultrasonics Symposium, 141-152, 1998.
  12. Ken-ya Hashimoto, " Surface Acoustic Wave Devices in Telecommunications", Springer, pp. 27-30, 2000
  13. Supriyo Datta, " Surface Acoustic Wave Devices ", Prentice-Hall Publishing , pp. 98-110, 1986