참고문헌
- Iacovides, H., Jackson, D. C., Kelemenis, G., Launder, B. E.and Yuan, Y. M., 1999, “Experiments on Local HeatTransfer in a Rotating Square-Ended U-bend,” InternationalJournal of Heat and Fluid Flow, Vol. 20, pp. 302-310. https://doi.org/10.1016/S0142-727X(99)00019-3
- Murata, A. and Mochizuki, S., 1999, “Effects of Cross-Sectional Aspect Ratio on Turbulent Heat Transferin an Orthogonally Rotating Rectangular Smooth Duct,”International Journal of Heat and Mass Transfer Vol.2, pp. 3803-3814.
-
Prabhu, S. V. and Vedula, R. P., 2000, “Pressure DropCharacteristics in a Rotating Smooth Square ChannelWith a Sharp
$180^{\circ}$ Bend,” Experimental Thermal andFluid Science, Vol. 21, pp. 198-205. https://doi.org/10.1016/S0894-1777(00)00003-0 - Lin, Y. -L., Shih, T. I. -P., Stephens M. A. and ChyuM. K., 2001, “A Numerical Study of Flow and HeatTransfer in a Smooth and Ribbed U-Duct With andWithout Rotation,” Journal of Heat Transfer, Vol. 123, pp. 219-232. https://doi.org/10.1115/1.1345888
-
Al-Hadhrami L. and Han J. C., 2003, “Effect ofRotation on Heat Transfer in Two-Pass Square Channelswith Five Different Orientations of
$45^{\circ}$ Angled Rib Turbulators,” International Journal of Heat and Mass Transfer, Vol. 46, pp. 653-669. https://doi.org/10.1016/S0017-9310(02)00325-3 - Wu, S. J., Kim, W. S. and Cho, H. H., 1998, “AugmentHeat Transfer in a Rotating Duct with Angled Ribs,”Transactions of KSME, B, Vol. 22, No. 1, pp. 149-157.
- Al-Qahtani, M. S. and Basha, M., 2007, “Flow andHeat Transfer Prediction in Rotating RectangularPin-Fin Channels (AR=10:1),” Journal of Thermophysicsand Heat Transfer, Vol. 21, No. 4, pp. 744-753. https://doi.org/10.2514/1.25580
- Griffith, T. S., Al-Hadharami, L. and Han J. C., 2003, “HeatTransfer in Rotating Rectangular Cooling Channels (AR=4) withDimples,” Journal of Turboma chinery, Vol. 125, pp. 555-564. https://doi.org/10.1115/1.1571850
- Elyyan, M. A. and Tafti, D. K., 2009, “Effect of CoriolisForces in a Rotating Channel with Dimples and Protrusions,” International Journal of Heat and Fluid Flow, Vol.31, Issue 1, pp. 1-18.
- Schieder, M., Hocker, R., and von Wolfersdorf, J., 2001,“Heat Transfer and Pressure Loss and in a 180-Turnof a Rectangular, Rib-Roughened Two Passage Channel,”5th World Conference on Experimental Heat Transfer,Fluid Mechanics and Thermodynamics.
-
Luo, J., and Razinsky, E. H., 2009, “Analysis of Tu rbulentFlow in
$180^{\circ}$ Turning Ducts With and Without GuideVanes,” Journal of Turbomachinery, Vol. 131, Issue 2, 021011. https://doi.org/10.1115/1.2987239 - Zehnder, F., Schuler, M., Weigand, B., von Wolfersdorf,J., and Neumann, S. O., 2009, “The Effect of TurningVanes on Pressure Loss and Heat Transfer of a RibbedRectangular Two-Pass Internal Cooling Channel,” ASMETurbo Expo 2009, Orlando, Florida, USA, GT2009-59482.
- Lee, K. D., and Kim, K. Y., 2010, “Shape Optimizationof a Laidback Fan-Shaped Film-Cooling Hole to EnhanceCooling Performance,” ASME Turbo Expo 2010, Glasgow,UK, GT2010-22398.
- Kim, K. Y., and Moon, M. A., 2009, “Optimization of aStepped Circular Pin-Fin Array to Enhance Heat TransferPerformance,” Heat Mass Transfer, Vol. 46, pp. 63-74. https://doi.org/10.1007/s00231-009-0544-3
- Fu, W. L., Wright, L. M., and Han, J. C., 2006, “RotationalBuoyancy Effects on Heat Transfer in Five DifferentAspect-Ratio Rectangular Channels With Smooth Wallsand 45 Degree Ribbed Walls,” Transactions of ASME,Vol. 128, pp. 1130-1141.
- Gee, D. L., and Webb, R. L., 1980, “Forced ConvectionHeat Transfer in Helically Rib-Roughened Tubes,”International Journal of Heat and Mass Transfer, Vol.23, pp. 1127-1136. https://doi.org/10.1016/0017-9310(80)90177-5
- Goel, T., Haftka, R. T., Shyy, W. and Queipo, N., 2007,“Ensemble of Surrogate,” Structural and MultidisciplinaryOptimization, Vol. 33, No. 3, pp. 199-216. https://doi.org/10.1007/s00158-006-0051-9
피인용 문헌
- Effect of the Configurations of Coolant Flow Passage on the Thermal-Flow Characteristics of Screw Compressor vol.17, pp.1, 2014, https://doi.org/10.5293/kfma.2014.17.1.041