참고문헌
- A. Khaligh, A. M. rahimi, and A. Emadi, "Modified pulse-adjustment technique to control dc/dc converters driving variable constant-power loads," IEEE Trans. Ind. Electron., Vol. 55, No. 3, pp. 1133-1146, Mar. 2008. https://doi.org/10.1109/TIE.2007.909757
- I.-D. Kim, J.-Y. Kim, E.-C. Nho, and H.-G. Kim, "Analysis and design of a soft-switched pwm sepic dc-dc converter," Journal of Power Electronics, Vol. 10, No. 5, pp.461-467, Sep. 2010. https://doi.org/10.6113/JPE.2010.10.5.461
- W. R. Liou, M. L. Yeh, and Y. L. Kuo, "A high efficiency dual-mode buck converter integrated circuit for portable applications," IEEE Trans. Power Electron., Vol. 23, No, 2, pp. 667-677, Mar. 2008. https://doi.org/10.1109/TPEL.2007.915047
- H. Cha, R. Ding, Q. Tang, and Z. Peng, "Design and development of high power dc-dc converter for metro vehicle system," IEEE Trans. Ind. Appl., Vol. 44, No. 6, pp. 1795-1804, Nov./Dec. 2008. https://doi.org/10.1109/TIA.2008.2006324
- M. G. Villava and E. F. Ruppert, "Input-controlled buck converter for photovoltaic applications: modeling and design," in Proc. PEMD, pp. 505-509, 2008.
- N. D. Benavides and P. L. Chapman, "Modeling the effect of voltage ripple on the power output of photovoltaic modules," IEEE Trans. Ind. Electron., Vol. 55, No. 7, pp. 2638-3643, Jul. 2008. https://doi.org/10.1109/TIE.2008.921442
- T. Senanayake and T. Ninomiya, "An improved topology of inductorswitching dc-dc converter," IEEE Trans. Ind. Electron., Vol. 52, No. 3, pp. 869-878, Jun. 2005. https://doi.org/10.1109/TIE.2005.847572
- B. P. Divakar and D. Sutanto, "Optimum buck converter with a single switch," IEEE Trans. Power Electron., Vol. 14, No. 4, pp. 636-642, Jul. 1999. https://doi.org/10.1109/63.774200
- J. Xu and M. Qin, "Multi-pulse train control technique for buck converter in discontinuous conduction mode," IET Power Electron., Vol. 3, No. 3, pp. 391-399, May 2010. https://doi.org/10.1049/iet-pel.2009.0038
- K. M. Tsang and W. L. Chen, "Cascade controller for dc/dc buck converter," IEE Proc. Electr. Power Appl., Vol. 152, No. 4, pp. 827- 831, Jul. 2005. https://doi.org/10.1049/ip-epa:20045198
- L. Shulin, L. Jian, Y. Yinling, and J. Zhong, "Design of intrinsically safe buck dc/dc converters," in Proc. ICEMS, Vol. 2, pp. 1327-1331, 2005.
- L. Shulin, L. Yan, and L. Li, "Analysis of output voltage ripple of buck dc-dc converter and its design," in Proc. PEITS, Vol. 2, pp. 112-115, 2009.
- A. De Nardo, N. Femia, G. Petrone, and G. Spagnuolo, "Optimal buck converter output filter design for point-of-load applications," IEEE Trans. Ind. Electron., Vol. 57, No. 4, pp. 1330-1341, Apr. 2010. https://doi.org/10.1109/TIE.2009.2030219
- M. Jinno, P. Y Chen, Y. C. Lai, and K. Harada, "Investigation on the ripple voltage and the stability of synchronous rectifier buck converters with high output current and low output," voltage," IEEE Trans. Ind. Electron., Vol. 57, No. 3, pp. 1008-1016, Mar. 2010. https://doi.org/10.1109/TIE.2009.2029510
- E. Babaei, M. E. S. Mahmoodieh, and H. M. Mahery, "Operational modes and output voltage ripple analysis and design considerations of Buck-boost dc-dc converters," IEEE Trans. Ind. Electron., Vol. 59, No. 1, pp. 381-391, Jan. 2012. https://doi.org/10.1109/TIE.2011.2134056
- S.-L. Liu, J. Liu, H. Mao, and Y.-Q. Zhang, "Analysis of operating modes and output voltage ripple of boost dc-dc converters and its design considerations," IEEE Trans. Power Electron., Vol. 23, No. 4, pp. 1813- 1821, Jul. 2008. https://doi.org/10.1109/TPEL.2008.925417
피인용 문헌
- Effect of Non-Idealities on the Design and Performance of a DC-DC Buck Converter vol.16, pp.3, 2016, https://doi.org/10.6113/JPE.2016.16.3.832
- Advanced Fault Ride-Through Technique for PMSG Wind Turbine Systems Using Line-Side Converter as STATCOM vol.60, pp.7, 2013, https://doi.org/10.1109/TIE.2012.2229673
- Selection of non-isolated DC-DC converters for solar photovoltaic system vol.76, 2017, https://doi.org/10.1016/j.rser.2017.03.130
- Calculation of critical inductance in n-input buck dc–dc converter vol.9, pp.12, 2016, https://doi.org/10.1049/iet-pel.2016.0104
- Calculation of Output Voltage Ripple and Design Considerations of SEPIC Converter vol.61, pp.3, 2014, https://doi.org/10.1109/TIE.2013.2262748
- Robust nonlinear controller based on control Lyapunov function and terminal sliding mode for buck converter vol.29, pp.6, 2016, https://doi.org/10.1002/jnm.2164
- A Near-Threshold Voltage Startup Monolithic Boost Converter with Adaptive Sleeping Time Control vol.26, pp.04, 2017, https://doi.org/10.1142/S0218126617500633
- Modelling, design and stability analysis of an improved SEPIC converter for renewable energy systems vol.104, pp.9, 2017, https://doi.org/10.1080/00207217.2017.1312709
- Systematical method of designing the elements of the Cuk converter vol.55, 2014, https://doi.org/10.1016/j.ijepes.2013.09.024
- Analysis and investigation of energy transmission process in different operating modes of Sepic converter vol.7, pp.4, 2014, https://doi.org/10.1049/iet-pel.2013.0402
- Assessment of Step-Up Dc–Dc Converter with High Voltage Ratio in Different Operational Modes vol.39, pp.3, 2014, https://doi.org/10.1007/s13369-013-0766-z
- Mathematical modeling of buck–boost dc–dc converter and investigation of converter elements on transient and steady state responses vol.44, pp.1, 2013, https://doi.org/10.1016/j.ijepes.2012.08.035
- A new DC-DC converter based on voltage-lift technique vol.26, pp.6, 2016, https://doi.org/10.1002/etep.2133
- A new non-isolated free ripple input current bidirectional DC-DC converter with capability of zero voltage switching vol.46, pp.3, 2018, https://doi.org/10.1002/cta.2435
- Adaptive On-Time-Controlled PFM Boost Converter with a Below-Threshold Startup Voltage vol.27, pp.08, 2018, https://doi.org/10.1142/S0218126618501207