센서학회지 (Journal of Sensor Science and Technology)

  • 제20권1호
  • /
  • Pages.40-45
  • /
  • 2011
  • /
  • 1225-5475(pISSN)
  • /
  • 2093-7563(eISSN)
한국센서학회 (The Korean Sensors Society)
권호 표지
DOI QR코드

DOI QR Code

정전기력으로 구동되는 마이크로 캔틸레버 질량 센서의 제작과 특성

Fabrication and Characterization of Electrostatically Actuated Microcantilever Mass Sensors

  • Lee, Jung-Chul (Department of Mechanical Engineering, Sogang University) ;
  • Choi, Bum-Kyoo (Department of Mechanical Engineering, Sogang University)
  • 투고 : 2010.11.17
  • 심사 : 2010.12.15
  • 발행 : 2011.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Microcantilevers have been actively used in probe-based microscopy and gravimetric sensing for biological or chemical analytes. To integrate actuation or detection schemes in the structure, typical fabrication processes include several photolithographic steps along with conventional MEMS fabrication. In this paper, a simple and straightforward way to fabricate and operate silicon microcantilever mass sensors is presented. The fabricated microcantilever sensors which can be electrostatically actuated require only two photolithographic steps. Resonant characteristics of fabricated microcantilevers are measured with a custom optical-lever and results show size-dependent quality factors. Using a $40\;{\mu}m$ long, $7\;{\mu}m$ wide, and $3\;{\mu}m$ thick cantilever, we achieved subfemtogram mass resolution in a 1 Hz bandwidth.

키워드

참고문헌

  1. DongWeon Lee, “A micromachined cantilever for chemically sensitive scanning force microscope applications”, J. Kor. Sensors Soc, vol. 14, no. 1, pp. 1-6, 2005. https://doi.org/10.5369/JSST.2005.14.1.001
  2. Huihun Jung, Jinsung Park, Jaemoon Yang, Sang Woo Lee, Kilho Eom, Taeyun Kwon, and Dae Sung Yoon, “Study on the chemical environment for conformational change of i-motif DNA by atomic force microscopy cantilever”, J. Kor. Sensors Soc., vol. 19, no. 3, pp. 214-220, 2010. https://doi.org/10.5369/JSST.2010.19.3.214
  3. G. Binnig, C. F. Quate, and C. Gerber, “Atomic force microscope”, Phys. Rev. Lett., vol. 56, pp. 930-933, 1986. https://doi.org/10.1103/PhysRevLett.56.930
  4. B. llic, D. Czaplewski, M. Zalalutdinov, H. G. Craighead, P. Neuzil, C. Campagnolo, and C. Batt, “Single cell detection with micromechanical oscillators”, J. Vac. Sci. Technol. B, vol. 19, 2825, 2001. https://doi.org/10.1116/1.1421572
  5. B. Rogers, L. Manning, M. Jones, T. Sulchek, K. Murray, B. Beneschott, J. D. Adams, Z. Hu, T. Thundat, H. Cavazos, and S. C. Minne, "Mercury vapor detection with a self-sensing, resonating piezoelectric cantilever", Rev. Sci. Instrum., vol. 74, p. 4899, 2003. https://doi.org/10.1063/1.1614876
  6. Y. Lee, G. Lim, and W. Moon, “A piezoelectric microcantilever bio-sensor using the mass-micro-balancing technique with self-excitation”, Microsyst. Technol. 13, pp. 563-567, 2007. https://doi.org/10.1007/s00542-006-0216-x
  7. J. L. Hutter, and J. Bechhoefer, “Calibration of atomicforce microscope tips”, Rev. Sci. Instrum., vol. 64, p. 1868, 1993. https://doi.org/10.1063/1.1143970
  8. G. Y. Chen, R. J. Warmack, T. Thundat, D. P. Allison, and A. Huang, “Resonance response of scanning force microscopy cantilevers”, Rev. Sci. Instrum., vol. 65, p. 2532, 1994. https://doi.org/10.1063/1.1144647