DOI QR코드

DOI QR Code

Performance Analysis for Turbo Blower According to Inlet-Vane Angles

입구베인 각도에 따른 터보블로어 성능특성 연구

  • 장춘만 (한국건설기술연구원 설비플랜트연구실) ;
  • 임수정 (한국건설기술연구원 설비플랜트연구실) ;
  • 양상호 (삼원이앤비(주))
  • Received : 2010.11.17
  • Accepted : 2010.12.13
  • Published : 2011.03.01

Abstract

Turbo blowers are mainly used in refuse collection systems. We discuss blower performance in relation to the angle of the inlet vane installed at the upstream of the blower. The flow characteristics of the components are analyzed by three-dimensional Navier-Stokes analysis and compared to experimental results. A two-stage serially connected turbo blower is introduced to analyze the performance experimentally. Throughout the experimental measurements and the numerical simulation, the distorted inlet velocity generated in the small vane angle reduces the performance of the blower, because of the local leading-edge separation and the resulting non-uniform blade loading. We also perform a detailed flow analysis using the results obtained in the numerical simulation.

본 연구에서는 생활폐기물 관로이송 설비에서 사용되고 있는 터보블로어 입구베인의 설정각도에 따른 성능특성을 삼차원 나비어-스톡스 방정식을 통한 수치해석과 실험적인 방법을 적용하여 분석하였다. 다양한 압력특성에 따라 운전되는 시스템 특성을 고려하여 2 대의 터보블로어를 직렬로 연결한 실험용 시뮬레이터를 설계, 제작하고 각각의 터보블로어 성능특성을 입구베인의 설정각도에 따라 분석하였다. 입구베인의 설정각도에 따른 터보블로어 성능특성을 수치해석과 실험적 평가밥법으로 분석하여, 입구베인 설정각도가 완전 개방조건인 90 도에서 60 도까지 사용하였을 경우 효율의 손실없이 압력 및 유량을 제어할 수 있음을 확인하였다. 입구베인의 설정각도가 작은 경우에는 입구측의 스월흐름으로 인하여 입구 유속분포가 불균일하게 되며, 이로 인하여 하류측에 설치되는 터보블로어의 효율이 상대적으로 감소됨을 알 수 있었다.

Keywords

References

  1. Jang, C.-M., 2009, "Flow Characteristics of Piping System Having Various Shape in Refuse Collecting System," Journal of Fluid Machinery, Vol. 12, No. 3, pp. 13-18. https://doi.org/10.5293/KFMA.2009.12.3.013
  2. Bayomi, N. N., Abdel Hafiz, A. and Osman, A. M, 2006, "Effect of Inlet Straighteners on Centrifugal Fan Performance," Energy Conversion & Management, Vol. 47, pp. 3307-3318. https://doi.org/10.1016/j.enconman.2006.01.003
  3. Chon, Y., Kim, K. I. and Kim, K., 1993, "A Knowledge-based System for Centrifugal Fan Blade Design," Engng Applic. Artif. Intell, Vol. 6, No. 5, pp. 425-435. https://doi.org/10.1016/0952-1976(93)90003-G
  4. Cui, B.-L., Zhu Z.-C., Li, Y. and Jin, Y.-Z., 2010, Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller, Proceedings of 3rd Asian Joint Workshop on Thermophysics and Fluid Science, pp. 57-62.
  5. Lee, Y.-T., 2010, Impact of Fan Gap Flow to the Centrifugal Impeller Aerodynamics, Proceedings of ASME turbo Expo 2010, GT2010-22381.
  6. Jang, C.-M., Kim D.-W. and Lee, S.-Y., 2008, Performance Characteristics of Turbo Blower in a Refuse Collecting System According to Operation Conditions, Journal of Mechanical Science and Technology, Vol. 22, pp. 1896-1901. https://doi.org/10.1007/s12206-008-0729-6
  7. Jang, C.-M. and Yang, S.-H., 2010, Performance Characteristics on a Turbo Blower According to the Shape of a Volute Casing, Journal of the KSME B, Vol. 34, pp. 843-850.
  8. CFX-12 User Manual, 2008, Ansys inc.

Cited by

  1. Performance Analysis of a Centrifugal Fan with Splitters vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-B.2011.35.10.1067