참고문헌
- 이태홍, 임영훈, "절삭모델링에 있어서 해석적 방법과 상용 FEM 해석의 유효성 비교에 관한 연구", 한국정밀공학회 2010년도 춘계학술대회논문집, pp. 9-10, 2010.
- Halil Bi, S. Engin Kı.lı.C., A. Erman Tekkaya, "A comparison of orthogonal cutting data from experiments with three different finite element models", International Journal of Machine Tools & Manufacture, Vol. 44, pp. 933-944, 2004. https://doi.org/10.1016/j.ijmachtools.2004.01.016
- 김국원, 안태길, 이우영, "절삭가공 해석을 위한 유한요소법의 적용", 한국정밀공학회, 추계학술대회논문집, pp. 81-81, 2003.
- Pradip Majumdar, R. Jay. and S. Ganesan, "Finite element analysis of temperature rise in metal cutting process", Applied Thermal Engineering, Vol. 25, Issues 14-15, pp. 2039-2495, 2005. https://doi.org/10.1016/j.applthermaleng.2005.04.008
- E. Uhlmanna, M. Graf von der Schulenburga and R. Zettiera, "Finite Element Modeling and Cutting Simulation of Inconel 718", CIRP Annals - Manufacturing Technology, Vol. 56, Issue 1, pp. 61-64, 2007. https://doi.org/10.1016/j.cirp.2007.05.017
- AdvantEdgeTM, Cutting FEM 5.6 User's Manual, Third Wave, pp. 192-209, 2010.
- J iang Huaa, Rajiv Shivpuria, and Thomas R. W., "Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using cutting edge geometry", Materials Science and Engineering A, Vol. 394, Issues 1-2, 15, pp. 238-248, 2005. https://doi.org/10.1016/j.msea.2004.11.011
- Y.M. Huang, M.L. Yanga, "Dynamic analysis of a rotating beam subjected to repeating axial and transverse forces for simulating a lathing process", International Journal of Mechanical Sciences, Vol. 51, Issue 3, pp. 256-268, 2009. https://doi.org/10.1016/j.ijmecsci.2008.12.005
- Jeffrey D. Thielea and Shreyes N. Melkote, "Effect of Tool Edge Geometry on Workpiece Subsurface Deformation and Through-Thickness Residual Stresses for Hard Turning of AISI 52100 Steel", Journal of Manufacturing Processes, Vol. 2, Issue 4, pp. 270-276, 2000. https://doi.org/10.1016/S1526-6125(00)70028-4