DOI QR코드

DOI QR Code

A Feasibility Study on Resilient Modulus of Expanded Polystyrene (EPS) Geofoam as a Flexible Pavement Subgrade Material

연성포장의 노반재료로서 EPS 지오폼의 회복탄성계수에 관한 적합성 연구

  • 박기철 (동서대학교 건축토목공학부) ;
  • 장용채 (목포해양대학교 해양시스템공학부)
  • Received : 2011.10.07
  • Accepted : 2011.11.16
  • Published : 2011.12.01

Abstract

Expanded Polystyrene (EPS) is a type of geosynthetic material manufactured with various strengths, unit weights, and dimensions. Due to recent advances in research on EPS, the use of EPS has increased dramatically. This super light weight material has a unit weight of approximately $0.16{\sim}0.47kN/m^3$, equivalent to 6.3~15.7 of that of most natural soils with conditions of fill materials. In spite of this advantage, it is noted that no standard method of resilient modulus test on EPS geofoam was reported and no literature on resilient modulus test methods for EPS geofoam exist. The main object of this study was to investigate feasibility of the resilient modulus of EPS when it was applied for flexible pavement. The investigation of the feasibility was completed based on the results from triaxial tests.

EPS지오폼은 다양한 강도, 밀도, 그리고 크기로 생산되는 일종의 화학합성물이다. EPS지오폼에 관한 근래의 발전으로 인해서, 그것의 사용은 급격하게 늘어나고있다. 이것은 초경량 재료로서 단위중량이 약 $0.16{\sim}0.47kN/m^3$ 인데, 이것은 채움재의 용도로 가장 대표적인 흙의 단위중량 $6.3{\sim}15.7kN/m^3$와 동일한 내구성을 가진다. 이런 장점에도 불구하고, EPS지오폼에 대한 회복탄성계수 표준측정방법은 보고된 바가 없는 실정이다. 본 연구의 주된 목적은 연성포장의 노반에 적용될 때의 EPS회복탄성계수의 적합성을 연구하는 것이다. 적합성연구는 삼축압축시험의 결과를 토대로 이루어졌으며, 연성포장의 노반재료로써 EPS는 실험결과의 분석과 근본적인 회복탄성의 특성을 비교분석하여 그것의 적합성을 확인해 보았다.

Keywords

References

  1. AASHTO (2003), Determining the Resilient Modulus of Soils and Aggregate Mateerials, American Association of State Highway and Transportation Officials Designation T 307-99, pp. 1-29.
  2. Frydenlund, T. E. (1987), Plastic Foam in Road Embankments Meddelelse 61, Norwegian Road Research Laboratory, pp. 7-12.
  3. Horvath, J. S. (1995), Geofoam Geosynthetic, Horvath Engineering P.C, N.Y., pp. 33-58.
  4. Huang, Y. H. (1993), Pavement Analysis and Design, Prentice Hall, New Jersey, pp. 316-333.
  5. Refsdal, G. (1985), Plastic foam - from Frost Protection to Road Embankments, Journal of The Northern Engineer, Vol. 17, Oslo, Norway, pp. 13-19.
  6. Stark, T. D., and Arellano, D. (2004), Guideline and Recommended Standard for Geofoam Applications in Highway Embankments, NCHRP Report 529, Transportation Research Board of the National Academes, pp. 7-12.