한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제10권2호
  • /
  • Pages.26-31
  • /
  • 2011
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

1.2MW급 터보블로워용 틸팅패드 저널베어링의 설계에 관한 고찰

A Review on the Design of a Tilting Pad Journal Bearing for a 1.2MW Turbo-blower

  • 조현민 (창원대학교 대학원 기계공학전공) ;
  • 정훈형 (창원대학교 대학원 기계공학전공) ;
  • 김재실 (창원대학교 기계공학전공) ;
  • 조수용 (경상대학교 항공우주시스템공학과)
  • 투고 : 2011.03.03
  • 심사 : 2011.04.22
  • 발행 : 2011.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This article provides the systematic design methodology for a tilting pad journal bearing. First the dynamic factors for the bearing are selected with the critical speed analysis. The pad bearing is then designed to have its best mechanical efficiency by simulations with changing of the number of pad and the lubricant flow rate with meeting the design specifications such as metal temperature, clearance and so on. And the simulation results are reviewed to compare with an experimental test. Finally the stability of rotor with the designed bearing is investigated. This methodology is successfully applied to the rotor for 1.2MW turbo-blower.

키워드

참고문헌

  1. Wilcock, D. F. and Pinkus, O., 1985, "Effects of Turbulence and Viscosity Variation on the Dynamic Coefficients of Fluid Film Journal Bearing", ASME Journal Tribology, Vol. 107, pp. 256-262. https://doi.org/10.1115/1.3261038
  2. Knight, J. D. and Barret, L. E., 1988, "Analysis of Tilting Pad Journal Bearings With Heat Transfer Effects", ASME Journal Tribology, Vol. 110, pp. 128-133. https://doi.org/10.1115/1.3261550
  3. Hopf, G. and Schuler, D., 1989, "Investigations on Large Turbine Bearings Working Under Transitional Conditions Between Laminar and Turbulent Flow", ASME Journal Tribology, Vol. 111, pp. 628-634. https://doi.org/10.1115/1.3261987
  4. Harangozo, A. V., Stolarski, T. A. and Gozdawa, R. J., 1991, "The Effect of Differential Lubrication Methods on the Performance of a Tilting Pad Journal Bearing", ASME Journal Tribology, Vol. 34, pp. 529-536. https://doi.org/10.1080/10402009108982066
  5. Dmochowski, W., Brockwell, K., DeCamillo, S. and Mikula, A., 1993, "A Study of the Thermal Characteristics of the Leading Edge Groove and Conventional Tilting Pad Journal Bearings", ASME Journal of Tribology, Vol. 115, pp. 219-226. https://doi.org/10.1115/1.2920995
  6. Taniguchi, S., Markino, T., Takeshita, K. and Ichimura, T., 1990, "A Thermohydrodynamic Analysis of Large Tilting Pad Journal Bearing in Laminar and Turbulent Flow Regimes with Mixing", ASME Trans., J. of Tribol., Vol. 113, No. 3, pp. 615-619.
  7. Knight, J. D. and Barrett, L. E., 1980, "Analysis of Tilting Pad Journal Bearings With Heat Transfer Effects," ASME Trans., J. of Tribol., Vol. 110, No. 1, pp. 128-133.
  8. Nillson, L. R. K., 1978, "The influence of bearing flexibility on the dynamic performance of radial oil film bearings," Proceedings of the fifth Leeds-Lyon Symposium on Tribology, pp. 311-319.