Abstract
The objectives of this study were to analyze the crown vertical structure, crown bulk density, and to develop regression models for predicting crown fuel load using the data from 10 destructively sampled Pinus densiflora trees in Bonghwa, Gyeongbuk. The fuel loads were observed higher in the middle portion of the vertical distribution of crown followed by the lower portion and upper portion of Pinus densiflora, respectively. Approximately 25% crown fuel load was found in the needle while 33% was observed in the branches with <1 cm diameter with a total of 58% available fuel loads. The average crown bulk density was $0.45kg/m^3$, and $0.27kg/m^3$ of this was available in the needles and branches with <1 cm diameters. The resulting models in linear equations were able to account for 84% and 88% of the observed variation, while the allometric equations with diameter at breast height as the single predictor showed better results to account for 90% and 95% of the observed variation in the available crown fuel loads and total crown fuel loads, respectively. The suggested equations in this study could provide quantitative fuel load attributes for crown fire behavior models and fire management of red pine stands in Bonghwa areas.
본 연구의 목적은 경북 봉화 지역에 분포하는 소나무림을 대상으로 수관의 수직적 구조, 수관연료밀도, 수관특성을 분석하고, 수관연료량 추정을 위한 회귀모형을 개발하는 것이다. 소나무림에 대한 수관의 수직적 구조에서 연료량 비율은 수관의 중간부분이 가장 높은 것으로 나타났으며, 수관연료량에서 잎과 가지가 차지하는 비율은 잎 25%, 직경 1 cm이하 가지 33%로 수관화 확산 시 이용 가능한 수관연료량은 총 58%를 차지하는 것으로 나타났다. 봉화 지역 소나무림에 대한 평균 수관연료밀도는 $0.45kg/m^3$으로 매우 높게 나타났고, 잎과 1 cm이하의 이용 가능한 연료밀도는 $0.27kg/m^3$으로 나타났다. 선형회귀식과 비선형회귀식을 이용하여 이용 가능한 수관연료량과 전체 수관연료량을 추정한 결과, 선형회귀식의 경우 결정계수($R^2$)가 각각 84%, 88%로 나타난 반면에, 비선형회귀식의 경우 결정계수가 각각 90%, 95%로 더 높게 나타났다. 본 연구에서 제시된 상대생장식은 봉화 지역 소나무림의 산불관리와 수관화모델에 대한 정량적인 연료량 정보를 제공해 줄 수 있다.