Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Variation of Impact Values by Heat Treatment Temperature to Prevent Brittle Fracture of Roll Shell Steel

압연롤강의 취성파괴 방지를 위한 열처리 온도에 따른 충격치 변화에 관한 연구 (I)

  • Suh, Chang-Min (School of Mechanical Engineering, Kyungpook National University) ;
  • Suh, Min-Soo (School of Advanced Materials Engineering, Kookmin University) ;
  • Cho, Hae-Yong (School of Mechanical Engineering, Chungbuk National University)
  • 서창민 (경북대학교 공과대학 기계공학부) ;
  • 서민수 (국민대학교 공과대학 신소재공학부) ;
  • 조해용 (충북대학교 공과대학 기계공학부)
  • Received : 2011.07.25
  • Accepted : 2011.10.17
  • Published : 2011.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study involved a series of experiments, which included impact tests (drop weight & Charpy) and hardness tests under various heat treatment conditions, followed by fractography observations of Normal Roll Shell steel (NRS), Abnormal Roll Shell steel (ARS), and S25C steel, in order to analyze the cause of brittle fracture and damages in Roll Shell steel. The optimal tempering temperature was characterized for ARS and NRS.

Keywords

References

  1. 김훈, 김주학, 지세환, 홍준화 (1997). "샬피 충격시험에 있어서 시험편 크기의 영향", 대한기계학회 논문집, Vol A-21-1, pp 93-103.
  2. 박정용, 김주학, 이윤규, 홍준화 (2000). "샤피 V-노치 충격 하중-변위 곡선의 균열정지하중을 이용한 원자로압력용기강의 파괴인성 예측", 한국재료학회지, Vol 10-4, pp 305-311.
  3. 우창기, 강동명, 이하성 (1999). "유효 산정을 위한 샬피 충격시험편의 노치형상에 관한 연구", 한국자동차공학회 논문집, Vol 7-6, pp 135-143.
  4. 이동환, 김형섭 (2008). "X20CrMoV121강과 2.25Cr1Mo강 용접부의 ASP 시험과 CVN 충격 시험의 상관관계에 대한 연구", 대한용접.접합학회지, Vol 26-3, pp 251-258.
  5. Strnadel, B. and Hausild, P. (2008). "Statistical Scatter in the Fracture Toughness and Charpy Impact Energy of Pearlitic steel", Materials Science and Engineering, Vol A-486, pp 208-214.
  6. Stephens, R.I., Fatemi, A., Stephens, R.R. and Fuchs, H.O. (2001). Metal Fatigue in Engineering, 2nd, Wiley Inter Science, p 110.
  7. Yang, M. Chao, Y.J., Li, X. Immel, D. and Tan, J. (2008). "Splitting in Dual-phase 590 High Strength Steel Plates Part II. Quantitative Analysis and Its Effect on Charpy Impact Energy", Materials Science and Engineering, Vol A-497, pp 462-470.
  8. Zrilic, M., Grabulov, V., Burzic, Z., Arsic, M. and Sedmak, S. (2007). "Static and Impact Crack Properties of a Highstrength Steel Welded Joint", International Journal of Pressure Vessels and Piping, Vol 84, pp 139-150. https://doi.org/10.1016/j.ijpvp.2006.09.021