Abstract
Since aircraft fuel tanks have many interfaces connected to the airframe as well as the fuel system, they have been considered as one of the system-dependent critical components. Crashworthy fuel tanks have been widely implemented to rotorcraft and rendered a great contribution for improving the survivability of crews and passengers. Since the embryonic stage of military rotorcraft history began, the US army has developed and practised a detailed military specification documenting the unique crashworthiness requirements for rotorcraft fuel tanks to prevent most, hopefully all, fatality due to post-crash fire. The mandatory crash impact test required by the relevant specification, MIL-DTL-27422D, has been recognized as a non-trivial mission and caused inevitable delay of a number of noticeable rotorcraft development programs such as that of V-22. The crash impact test itself takes a long-term preparation efforts together with costly fuel tank specimens. Thus a series of numerical simulations of the crash impact test with digital mock-ups is necessary even at the early design stage to minimize the possibility of trial-and-error with full-scale fuel tanks. In the present study the crash impact simulation of a few fuel tank configurations is conducted with the commercial package, Autodyn, and the resulting equivalent stresses and internal pressures are evaluated in detail to suggest a design improvement for the fuel tank configuration.
항공기 기체와의 체결부위가 많은 연료탱크는 체계연관성이 큰 대표적인 핵심 구성품 중의 하나로 다루어져 왔다. 회전익항공기에 광범위하게 적용되고 있는 내충격성 연료탱크는 항공기 추락 시 탑승자의 생존성 향상에 크게 기여하고 있다. 미육군에서는 항공기 추락 후 화재에 의한 인명손실을 원천적으로 방지하기 위해 군용 회전익기 역사의 초기 단계부터 연료탱크 고유의 내충격성에 관련된 군사규격을 제정하여 적용해 왔다. V-22 등의 잘 알려진 사례에 따르면 미군사규격(MIL-DTL-27422D)에서 요구하고 있는 연료탱크 충돌충격시험을 원활하게 통과하지 못하는 경우, 해당 연료탱크가 장착되는 항공기 자체의 개발일정에 심각한 지장을 초래한다. 연료탱크 충돌충격시험은 시편자체의 제작비용 및 준비기간이 상당히 소요되므로, 설계 초기단계부터 충돌충격시험에 대한 일련의 수치적 모사(numerical simulation)를 통해 실물에 의한 시행착오의 가능성을 최소화해야 한다. 본 연구에서는 충돌모사 프로그램인 Autodyn을 이용하여 연료탱크 충돌충격시험에 대한 수치적 모사를 수행하였으며, 그 결과로 구해진 등가응력 및 내부압력 평가를 통해 회전익항공기용 연료탱크의 내충격 성능을 고려한 설계방향을 제시하였다.