대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제48권6호
  • /
  • Pages.506-513
  • /
  • 2010
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지
DOI QR코드

DOI QR Code

가스터빈용 NiCrAlY/(ZrO2-Y2O3) 내열복합코팅의 고온 용융염 부식

Hot Corrosion of NiCrAlY(ZrO2-Y2O3) Heat Resistant Composite Coatings for Gas Turbines

  • 이재호 (성균관대학교 신소재공학과) ;
  • 이창희 (한양대학교 신소재공학부) ;
  • 이동복 (성균관대학교 신소재공학과)
  • Lee, Jae Ho (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Lee, Changhee (Department of Materials Science and Engineering, Hanyang University) ;
  • Lee, Dong Bok (School of Advanced Materials Science and Engineering, Sungkyunkwan University)
  • 투고 : 2010.01.29
  • 발행 : 2010.06.22
⟨ 이전 논문 다음 논문 ⟩

초록

The composite coatings of $(ZrO_2-8Y_2O_3)$/(Ni-22Cr-10Al-1Y) were prepared by the air plasma spraying method. They consisted of (Ni,Cr)-rich regions,$(ZrO_2-Y_2O_3)$-rich regions, and $Al_2O_3$-rich regions that were formed by oxidation of Al from (Ni-22Cr-10Al-1Y) during spraying. The coatings corroded at 800 and $900^{\circ}C$ in NaCl-$Na_2SO_4$ molten salts up to 50 hr. Ni, Cr and Al oxidized to NiO, $Cr_2O_3$ and ${\alpha}-Al_2O_3$, respectively. These oxides and $(ZrO_2-Y_2O_3)$ were dissolved off into the molten salts during hot corrosion, which resulted in the ever-lasting corrosion of the composite coatings. Chromium diffused out from the (Ni,Cr)-rich regions and oxidized to $Cr_2O_3$, which was most frequently found as surface scales. Aluminum retained in the (Ni,Cr)-rich regions were similarly diffused out.

키워드

과제정보

연구 과제 주관 기관 : 기초전력연구원

참고문헌

  1. C. W. Lee, J. H. Han, M. C. Shin, and S. I. Kwun, J. Kor. Inst. Met. & Mater. 47, 290 (2009).
  2. C. H. Park, D. H. Oh, K. M. Cho, and I. M. Park, J. Kor. Inst. Met. & Mater. 37, 570 (1999).
  3. J. H. Shin, Y. G. Jung, and S. K. Hur, J. Kor. Inst. Met. & Mater. 38, 1490 (2000).
  4. S. H. Cho, S. S. Hong, D. S. Kang, B. H. Park, J. M. Hur, and H. S. Lee, J. Kor. Inst. Met. & Mater. 46, 646 (2008).
  5. A. Haynes, E. D. Rigney, M. K. Ferber, and W. D. Porter, Surf. Coat. Technol. 86-87, 102 (1996). https://doi.org/10.1016/S0257-8972(96)02985-4
  6. H. Guo, X. Bi, S. Gong, and H. Xu, Scripta Met. 44, 683 (2001). https://doi.org/10.1016/S1359-6462(00)00646-1
  7. S. Y. Park, J. H. Kim, and C. G. Park, J. Kor. Inst. Met. & Mater. 41, 466 (2003).
  8. M. C. Mayoral, J. M. Andres, M. T. Bona, V. Higuera, and F. J. Belzunce, Surf. Coat. Technol. 200, 1816 (2008).
  9. D. B. Lee and C. H. Lee, Surf. Coat. Technol. 193, 239 (2005). https://doi.org/10.1016/j.surfcoat.2004.08.140