DOI QR코드

DOI QR Code

Progressive collapse analysis of a RC building subjected to blast loads

  • Almusallam, T.H. (Specialty Unit for Safety and Preservation of Structures, King Saud University) ;
  • Elsanadedy, H.M. (Specialty Unit for Safety and Preservation of Structures, King Saud University) ;
  • Abbas, H. (Specialty Unit for Safety and Preservation of Structures, King Saud University) ;
  • Alsayed, S.H. (Specialty Unit for Safety and Preservation of Structures, King Saud University) ;
  • Al-Salloum, Y.A. (Specialty Unit for Safety and Preservation of Structures, King Saud University)
  • 투고 : 2009.11.23
  • 심사 : 2010.06.16
  • 발행 : 2010.10.20

초록

The paper seeks to explore some aspects of the current state of knowledge on progressive collapse in the technical literature covering blast loads and structural analysis procedure applicable to reinforced concrete (RC) buildings. The paper describes the progressive collapse analysis of a commercial RC building located in the city of Riyadh and subjected to different blast scenarios. A 3-D finite element model of the structure was created using LS-DYNA, which uses explicit time integration algorithms for solution. Blast loads were treated as dynamic pressure-time history curves applied to the exterior elements. The inherent shortcomings of notional member removal have been taken care of in the present paper by simulating the damage of structural elements through the use of solid elements with the provision of element erosion. Effects of erosion and cratering are studied for different scenarios of the blast.

키워드

참고문헌

  1. ASCE-7 (2005), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, New York, NY.
  2. Asprone, D., Jalayer, F., Prota, A. and Manfredi, G. (2010), "Proposal of a probabilistic model for multi-hazard risk assessment of structures in seismic zones subjected to blast for the limit state of collapse", Struct. Safety, 32(1), 25-34. https://doi.org/10.1016/j.strusafe.2009.04.002
  3. Bae, S.W., LaBoube, R.A., Belarbi, A. and Ayoub, A. (2008), "Progressive collapse of cold-formed steel framed structures", Thin Wall. Struct., 46(7-9), 706-719. https://doi.org/10.1016/j.tws.2008.01.041
  4. Baker, W.E., Cox, P.A., Westine, P.S., Kulesz, J.J. and Strehlow, R.A. (1983), Explosion Hazards and Evaluation, Elsevier, Amsterdam.
  5. Belytschko, T.B. and Tsay, C.S. (1981), "Explicit algorithms for non-linear dynamics of shells", AMD, ASME, 48, 209-231.
  6. Blankenhorn, G., Mattern, S. and Schweizerhof, K. (2007), "Controlled building collapse analysis and validation", Universitat Karlsruhe, Institut fur Mechanik. LS-DYNA User Forums, Frankelthal.
  7. Broadhouse, B.J. (1995), "The winfrith concrete model in LS-DYNA 3D", Report SPD/D (95)363, Structural Performance Department, AEA Technology, Winfrith Technology Center, U.K.
  8. Brode, H.L. (1955), "Numerical solution of spherical blast waves", J. Appl. Phys., 26(6), 766-775. https://doi.org/10.1063/1.1722085
  9. ConWep (1990), Conventional weapons Effects, Computer Software Produced by U.S. Army Waterways Experimental Station, Mississippi, U.S.A.
  10. Cranz, C. (1926), Lehrbuch der Ballistik, Springer-Verlag, Berlin.
  11. DoD (2005), Design of Building to Resist Progressive Collapse, United facilities criteria (UFC), UFC 4-023-03, Department of Defense, USA
  12. Dusenberry, D.O. (2002), "Review of existing guidelines and provisions related to progressive collapse", Workshop on Prevention of Progressive Collapse, National Institute of Building Sciences, Washington DC.
  13. Ellingwood, B.R. (2006), "Mitigating risk from abnormal loads and progressive collapse", J. Perform. Constr. Fac., 20(4), 315-323. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(315)
  14. Ellingwood, B.R., Smilowitz, R., Dusenberry, D.O., Duthinh, D., Lew, H.S. and Carino, N.J. (2007), "Best practices for reducing the potential for progressive collapse in buildings", Report no. NISTIR-7396. National Institute of Standards and Technology, Technology Administration, US Department of Commerce.
  15. FEMB27-PC (2000), Finite Element Model Builder, Version-27, for Windows 98/NT4/2000.
  16. Fu, F. (2009), "Progressive collapse analysis of high-rise building with 3-D finite element modeling method", J. Constr. Steel Res., 65(6), 1269-1278. https://doi.org/10.1016/j.jcsr.2009.02.001
  17. GSA (2003), Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, General Service Administration.
  18. Henrych, J. (1979), The Dynamics of Explosions and Its Use, Elsevier, Amsterdam.
  19. Hopkinson, B. (1915), British Ordinance Board Minutes.
  20. IBC (2000), International Building Code 2000, International Code Council, Inc., International Conference of Building Officials, Whittier, CA.
  21. ISC (2001), ISC Security Criteria for New Federal Office Buildings and Major Modernization Projects, The Interagency Security Committee.
  22. Izzuddin, B.A., Vlassis, A.G., Elghazouli, A.Y. and Nethercot, D.A. (2008), "Progressive collapse of multi-storey buildings due to sudden column loss-Part I: Simplified assessment framework", Eng. Struct., 30(5), 1308- 1318. https://doi.org/10.1016/j.engstruct.2007.07.011
  23. Kaewkulchai, G. and Williamson, E.B. (2004), "Beam element formulation and solution procedure for dynamic progressive collapse analysis", Comput. Struct., 82(7-8), 639-651. https://doi.org/10.1016/j.compstruc.2003.12.001
  24. Khandelwal, K., El-Tawil, S. and Sadek, F. (2009), "Progressive collapse analysis of seismically designed steel braced frames", J. Constr. Steel Res., 65(3), 699-708. https://doi.org/10.1016/j.jcsr.2008.02.007
  25. Kim, J. and Kim, T. (2009), "Assessment of progressive collapse-resisting capacity of steel moment frames", J. Constr. Steel Res., 65(1), 169-179. https://doi.org/10.1016/j.jcsr.2008.03.020
  26. Kinney, G.F. and Graham, K.J. (1985), Explosive Shocks in Air, Springer Verlag, Berlin.
  27. Lan, S., Crawford, J.E. and Morrill, K.B. (2005), "Design of reinforced concrete columns to resist the effects of suitcase bombs", Proceedings of the 6th International Conference on Shock and Impact Loads on Structures, Perth, December..
  28. Lee, C.H., Kim, S., Han, K.H. and Lee, K. (2009), "Simplified nonlinear progressive collapse analysis of welded steel moment frames", J. Constr. Steel Res., 65(5), 1130-1137. https://doi.org/10.1016/j.jcsr.2008.10.008
  29. LS-DYNA (2007), User's Keyword Manual, Volume 1, Version 971, Livermore Software Technology Corporation (LSTC).
  30. Luccioni, B.M., Ambrosini, R.D. and Danesi, R.F. (2004), "Analysis of building collapse under blast loads", Eng. Struct., 26(1), 63-71.
  31. Marjanishvili, S. and Agnew, E. (2006), "Comparison of various procedures for progressive collapse analysis", J. Perform. Constr. Fac., ASCE, 20(4), 365-374. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(365)
  32. Marjanishvili, S.M. (2004), "Progressive analysis procedure for progressive collapse", J Perform. Constr. Fac. ASCE, 18(2), 79-85. https://doi.org/10.1061/(ASCE)0887-3828(2004)18:2(79)
  33. Mattern, S., Blankenhorn, G. and Schweizerhof, K. (2006), "Numerical investigation on collapse kinematics of a reinforced concrete structure within a blasting process", Universitat Karlsruhe, Institut fur Mechanik. LSDYNA User Forums, Ulm.
  34. Mays, G.C. and Smith, P.D. (1995), Blast Effects on Buildings: Design of Buildings to Optimize Resistance to Blast Loading, Thomas Telford, New York, NY.
  35. Mills, C.A. (1987), "The design of concrete structures to resist explosions and weapon effects", Proceedings of the 1st International Conference for Hazard Protection, Edinburgh.
  36. Mlakar, P.F., Corley, W.G., Sozen, M.A. and Thornton, C.H. (1999), "The Oklahoma City bombing: analysis of blast damage to the Murrah Building", J. Perform. Constr. Facil., 12(3), 113-119.
  37. Mohamed, O.A. (2006), "Progressive collapse of structures: Annotated bibliography and comparison of codes and standards", J. Perform. Constr. Fac., 20(4), 418-425. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(418)
  38. Nair, R.S. (2006), "Preventing disproportionate collapse", J. Perform. Constr. Fac., 20(4), 309-314. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(309)
  39. NBCC (1996), National Building Code of Canada 1995, National Research Council of Canada, Ottawa, Canada.
  40. Paik, J.K. and Kim, B.J. (2008), "Progressive collapse analysis of thin-walled box columns", Thin Wall. Struct., 46(5), 541-550. https://doi.org/10.1016/j.tws.2007.10.004
  41. Pekau, O.A. and Cui, Y. (2006), "Progressive collapse simulation of precast panel shear walls during earthquakes", Comput. Struct., 84(5-6), 400-412. https://doi.org/10.1016/j.compstruc.2005.09.027
  42. Rose, T.A. and Smith, P.D. (2002), "Influence of the principal geometrical parameters of straight city streets on positive and negative phase blast wave impulses", Int. J. Impact Eng., 27(4), 359-376. https://doi.org/10.1016/S0734-743X(01)00060-4
  43. Smith, P.D. and Hetherington, J.G. (1994), Blast and Ballistic Loading of Structures, Butterworth-Heinemann Ltd., Great Britain.
  44. Starossek, U. (2006), "Progressive collapse of structures: Nomenclature and procedures", IABSE Struct. Eng. Int., 16(2), 113-117. https://doi.org/10.2749/101686606777962477
  45. Starossek, U. and Wolff, M. (2005), "Progressive collapse: Design strategies", Proceedings of the IABSE Symposium Structures and Extreme Events, Lisbon, September.
  46. TM 5-1300 (1990), Structures to Resist the Effect of Accidental Explosions, US Army Manual, the Navy and the Air Force.
  47. Tsai, M.H. and Lin, B.H. (2008), "Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure", Eng. Struct., 30(12), 3619-3628. https://doi.org/10.1016/j.engstruct.2008.05.031
  48. Vlassis, A.G., Izzuddin, B.A., Elghazouli, A.Y. and Nethercot, D.A. (2008), "Progressive collapse of multi-storey buildings due to sudden column loss-Part II: Application", Eng. Struct., 30(5), 1424-1438. https://doi.org/10.1016/j.engstruct.2007.08.011
  49. Xu, K. and Lu, Y. (2006), "Numerical simulation study of spallation in reinforced concrete plates subjected to blast loading", Comput. Struct., 84, 431-438. https://doi.org/10.1016/j.compstruc.2005.09.029

피인용 문헌

  1. Blast response of GFRP-strengthened infill masonry walls vol.115, 2016, https://doi.org/10.1016/j.conbuildmat.2016.04.053
  2. Progressive collapse analysis of a typical RC high-rise tower vol.29, pp.4, 2017, https://doi.org/10.1016/j.jksues.2017.06.005
  3. Progressive collapse potential of a typical steel building due to blast attacks vol.101, 2014, https://doi.org/10.1016/j.jcsr.2014.05.005
  4. A new method for progressive collapse analysis of RC frames vol.60, pp.1, 2016, https://doi.org/10.12989/sem.2016.60.1.031
  5. Collapse Resistance of RC Moment-Resisting Frame and Shear Wall Structural Systems Exposed to Blast vol.31, pp.2, 2017, https://doi.org/10.1061/(ASCE)CF.1943-5509.0000957
  6. Column-loss response of RC beam-column sub-assemblages with different bar-cutoff patterns vol.49, pp.6, 2014, https://doi.org/10.12989/sem.2014.49.6.775
  7. Progressive collapse analysis of a steel frame subjected to confined explosion and post-explosion fire vol.19, pp.11, 2016, https://doi.org/10.1177/1369433216649381
  8. Experimental investigation of progressive collapse potential of ordinary and special moment-resisting reinforced concrete frames vol.50, pp.2, 2017, https://doi.org/10.1617/s11527-017-1014-x
  9. Investigation of precast RC beam-column assemblies under column-loss scenario vol.142, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.120
  10. Progressive Collapse Analysis of RC Buildings against Internal Blast vol.18, pp.12, 2015, https://doi.org/10.1260/1369-4332.18.12.2181
  11. Experimental Investigation on Vulnerability of Precast RC Beam-column Joints to Progressive Collapse pp.1976-3808, 2018, https://doi.org/10.1007/s12205-018-1518-0
  12. Identification of progressive collapse pushover based on a kinetic energy criterion vol.39, pp.3, 2010, https://doi.org/10.12989/sem.2011.39.3.427
  13. Numerical analyses for the structural assessment of steel buildings under explosions vol.45, pp.6, 2010, https://doi.org/10.12989/sem.2013.45.6.803
  14. Effect of Earthquake characteristics on seismic progressive collapse potential in steel moment resisting frame vol.12, pp.5, 2017, https://doi.org/10.12989/eas.2017.12.5.529
  15. Strengthening of precast RC beam-column connections for progressive collapse mitigation using bolted steel plates vol.161, pp.None, 2010, https://doi.org/10.1016/j.engstruct.2018.02.009
  16. Field measurement and numerical simulation of excavation damaged zone in a 2000 m-deep cavern vol.16, pp.4, 2010, https://doi.org/10.12989/gae.2018.16.4.399
  17. Mitigation of progressive collapse in steel structures using a new passive connection vol.70, pp.4, 2010, https://doi.org/10.12989/sem.2019.70.4.381
  18. A Simplified Method for Assessing the Response of RC Frame Structures to Sudden Column Removal vol.10, pp.9, 2020, https://doi.org/10.3390/app10093081
  19. Review of blast analysis and design for industrial/residential buildings and ammunition storage facilities vol.17, pp.2, 2010, https://doi.org/10.1108/mmms-03-2020-0052
  20. Development limitations of compressive arch and catenary actions in reinforced concrete special moment resisting frames under column-loss scenarios vol.16, pp.12, 2010, https://doi.org/10.1080/15732479.2020.1719166
  21. New moment-resisting beam-column joints to increase progressive collapse resistance of precast concrete buildings vol.44, pp.None, 2010, https://doi.org/10.1016/j.jobe.2021.102884