Corrosion Science and Technology

The Corrosion Science Society of Korea (한국부식방식학회)
권호 표지
DOI QR코드

DOI QR Code

Cut Edge Corrosion of Painted Zn and 55%Al-Zn Coated Steels under Alternate Wetting and Drying

  • Nishikata, A. (Department of Metallurgical and Ceramics Engineering, Tokyo Institute of Technology) ;
  • Tsuda, T. (Department of Metallurgical and Ceramics Engineering, Tokyo Institute of Technology) ;
  • Tsuru, T. (Department of Metallurgical and Ceramics Engineering, Tokyo Institute of Technology)
  • Received : 2009.08.10
  • Accepted : 2010.02.17
  • Published : 2010.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Electrochemical study on cut edge corrosion of prepainted Zn coated (GI) and 55%Al-Zn coated (GL) steels has been performed in wet-dry cyclic conditions. Maximum width of delaminated polymer coating from the cut edge for GI and GL specimens was evaluated under wet-dry cyclic conditions. The cyclic tests were carried out for 1000 h by changing of relative humidity, where the salt of NaCl was deposited on the specimen every 48 h. The cut edge corrosion test under NaCl deposit indicated that the delamination of the GL specimen progresses at a higher rate than the GI. The electrochemical corrosion monitoring was also performed under condition of alternate exposure to immersion in NaCl solution and drying at 60%RH and $25^{\circ}C$. On the basis of the results of the delamination tests and electrochemical measurements, the mechanism of cut edge corrosion for GI and GL were discussed.

Keywords

References

  1. H.Nomura, H Kenai, and M.Takasugi, Tetsu-to-Hagane, 89, 196 (2003). https://doi.org/10.2355/tetsutohagane1955.89.1_196
  2. A.P.Yadav, A.Nishikata, and T.Tsuru, Corros. Eng., Sci. & Tech., 43, 23 (2008). https://doi.org/10.1179/174327807X214545
  3. A.P.Yadav, H.Katayama, K.Noda, H.Masuda, A.Nlshikata, and T.Tsuru, Corros. Sci., 49, 3716 (2007). https://doi.org/10.1016/j.corsci.2007.03.039
  4. A.P.Yadav, H.Katayama, K.Noda, H.Masuda, A.Nishikata, and T.Tsuru, Electrochim Acta, 52, 3121 (2007). https://doi.org/10.1016/j.electacta.2006.09.061
  5. A.P.Yadav, H.Katayama, K.Noda, H.Masuda, A.Nishikata, and T.Tsuru, Electrochim Acta, 52, 2411 (2007). https://doi.org/10.1016/j.electacta.2006.08.050
  6. A.P.Yadav, A.Nishikata, and T.Tsuru, J. Electroanal. Chem., 585, 142 (2005). https://doi.org/10.1016/j.jelechem.2005.08.007
  7. A.P.Yadav, A.Nishikata, and T.Tsuru, ISIJ, 44, 1727 (2004). https://doi.org/10.2355/isijinternational.44.1727
  8. A.P.Yadav, F.Suzuki, A.Nishikala, and T.Tsuru, Electrochim. Acta, 49, 2725 (2004). https://doi.org/10.1016/j.electacta.2004.01.033
  9. A.P.Yadav, A.Nishikata, and T.Tsuru, Corros. Sci., 46, 361 (2004). https://doi.org/10.1016/S0010-938X(03)00153-7
  10. A.P.Yadav, A.Nishikata, and T.Tsuru, Corros. Sci., 46, 169 (2004). https://doi.org/10.1016/S0010-938X(03)00130-6
  11. G.A. El-Mahdy, A. Nishikata, and T.Tsuru, Corros. Sci., 42, 1509 (2000). https://doi.org/10.1016/S0010-938X(00)00009-3
  12. G.A.El-Mahdy, A. Nishikata, and T.Tsuru, Corros. Sci., 42, 183 (2000). https://doi.org/10.1016/S0010-938X(99)00057-8
  13. H.Katayama, A.Nishikata, Y.Tay, A.S.Viloria, and T.Tsuru, Mater. Trans. JIM, 38, 1089 (1997). https://doi.org/10.2320/matertrans1989.38.1089