References
- 건설교통부(2007) 콘크리트구조설계기준, 한국콘크리트학회.
- 건설교통부(2008) 도로교설계기준, 한국콘크리트학회.
- 건설교통부(2009) 강구조설계기준, 한국강구조학회.
- 건설교통부, 고려대학교(2005) 강관 삽입 중공 R.C 고교각 개발, 한국건설교통기술평가원, 건설기술연구개발사업 최종연구보고서.
- 김동조, 황원섭(2003) 콘크리트 구속효과를 고려한 CFT 단주의 강도, 한국강구조학회 논문집, 한국강구조학회, 제14권, 제6호, pp. 813-822.
- 박국동, 황원섭, 윤희택, 선우현(2010) 합성형태에 따른 콘크리트 구속효과를 고려한 응력-변형률 관계식의 제안, 대한토목학회 논문집, 대한토목학회, 제30권 제3A호, pp.265-275.
- 연정흠, 이제일(2002) 고강도 PSC 휨부재의 비선형 모멘트-곡률 관계와 전산구조해석. 한국전산구조공학회 논문집, 한국전산구조공학회, 제15권, 제1호, pp.95-104.
- 조기연(2003) 압축하중이 작용하는 콘크리트 부재의 비선형 해석, 석사학위논문, 인하대학교 대학원.
- 최성모(1995) 콘크리트 충전 원형 강관 기둥 및 접합부의 특성에 관한 연구, 박사학위논문, 서울시립대학교.
- 한택희, 염응준, 한상윤, 강영종(2007) 구속효과를 고려한 내부 구속 중공 CFT 부재의 비선형 콘크리트 모델 개발, 한국강구조학회 논문집, 한국강구조학회, 제19권 제1호, pp.42-52.
- 한택희, 원덕희, 이규세, 강영종(2009) 구속 효과를 고려한 원형 CFT 기둥의 비선형 해석, 한국방재학회 논문집, 한국방재학회, 제9권, 제6호, pp.1-9.
- ACI Committee 318 (2002) Building code requirements for structural concrete(318-02) and Commentary (318R-02). American Concrete Institute. Detroit.
- AISC-LRFD (2001) Manual of steel construction, 3rd Edition, American Institute of Steel Construction.
- AISC (2005) Specification for Structural Steel Buildings (ANSI /AISC 360-05), American Institute of Steel Construction, Chicago, IL.
- AIJ (1985) Design Recommendations for Composite Constructions. Architectural Institute of Japan.
- CEB-FIP (1999) Structural Concrete, International Federation for Structural Concrete, Lausanne.
- Eurocode-4 (2004) Design of composite steel and concrete structures, European Committee for Standardization Brussels.
- Hognestad, E., Hanson, N.W. and McHenry, D. (1955) Concrete stress distribution in ultimate stress design. ACI Journal, Vol. 27, No. 4, pp.455-479.
- Hu, T., Huang, C.S. and Chen, Z.L. (2005) Finite element analysis of CFT columns subjected to an axial compressive force and bending moment in combination, Constructional Steel Research, Vol. 62, pp.1692-1712.
- Kent, D.C. and Park, R. (1971) Flexural Members with confined concrete. Journal of Structural Division, ASCE, Vol. 97, No. ST7, pp.1969-1989.
- Mander, J.B., Priestly, M.J.N., and Park, R. (1988) Theoretical stress-strain model for confined concrete. Journal of Structural Engineering, ASCE, Vol. 114, No. 8, pp.1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- Popovics, S. (1970) A review of stress-strain relationships for concrete. ACI Journal, Vol. 67, No. 3, pp. 243-248.
- Saatcioglu, M. and Razvi, S.R. (1992) Strength and ductility of confined concrete, Journal of Structural Engineering, Vol. 118, No. 6, pp.1590-1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590)
- Scott, B.D., Park, R., and Priestly, M.J.N. (1982) Stress- strain behavior of concrete confined by overlapping hoops at low and high strain rates. ACI Structural Journal, No. 79-2, Jan-Feb.
- Thorenfeldt, E., Tomaszewicz, A., and Jensen, J.J. (1987) Mechanical properties of high-strength concrete and application in design in design, Proc. Symposium on Utilization of High Strength Concrete, Stavanger, Norway, Tapir, Trondheim, pp.127-133.
- Torres, L.I., Lopez-Almansa, F., and Bozzo, L.M. (2004) Tension-stiffening model for cracked flexural concrete members, Journal of structural Engineering, ASCE, Vol. 130, No 8, pp.1242-1251. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1242)