Abstract
The bubbles could be created from multiple source in the surface of ocean. The bubbles which are created like this affect to the intensity and the sound speed of acoustic wave which are used from the ocean. From the research, it observed Reverberation from the sea surface, using Vbeam transmission and reception equipment that was a cross-shaped Array, from 2008 July 2nd to July 3rd at 4Km from the East Sea Mookho port. It is difficult to analyze data because the received signal has ambient noise and occurrence ISI(Inter Symbol Interference) for multipath. This paper remove that ambient noise and ISI using the directions of arrival beamforming and the filter and sum beamforming. After beamforming, a following DFE(Decision Feedback Equalizer) removes the remaining multipath components. Experimental results show that the proposed technique reduce the errors caused by ISI.
해양에서는 해수면에 일어나는 여러 발생원들에 의해 많은 기포들이 생성될 수 있다. 이렇게 생성된 기포들은 해양에서 사용되는 음파의 세기와 음속에 영향을 미치게 된다. 본 연구에서는 이런 기포의 영향을 알아보고자 2008년 7월 2일 ~ 7월 3일 까지 동해 묵호항에서 약4Km 떨어진 해역에서 십자형 어레이인 Vbeam 송수신 장비를 사용하여 해수면의 Reverberation을 실측하였다. 수신된 신호는 주변 노이즈가 심하고 Multipath에 의해 ISI(Inter Symbol Interference)가 발생하기 때문에 자료 분석에 어려움이 있다. 본 논문에서는 입사각 추정 기반의 빔형성 기법과 Filter and Sum 기법을 적용하여 주변 노이즈와 ISI를 제거하였으며 완전하게 제거되지 않은 ISI를 제거하기 위해서 DFE(Decision Feedback Equalizer)를 적용하여 ISI에 의한 오차를 줄일 수 있었다.