한국레이저가공학회지 (Laser Solutions)

한국레이저가공학회 (Korean Society of Laser Processing)
권호 표지

자동차용 1500MPa급 초고강도강의 레이저 용접 특성에 관한 연구

A Study on Laser Welding Characteristics of 1500MPa Grade Ultra High Strength Steel for Automotive Application

  • Choi, Jin-Kang (Department of Mechanical Engineering, Hanyang University) ;
  • Kim, Jong-Gon (Advanced Welding&Joining R&D Department, KITECH) ;
  • Shin, Seung-Min (Advanced Welding&Joining R&D Department, KITECH) ;
  • Kim, Cheol-Hee (Advanced Welding&Joining R&D Department, KITECH) ;
  • Rhee, Se-Hun (Department of Mechanical Engineering, Hanyang University)
  • 발행 : 2010.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, fundamental experiment was conducted with various strength of UHSS (Ultra High Strength Steel) by $CO_2$ laser. And then, butt and lap joint laser welding with boron alloyed steel and Al-Si coated boron alloy steel have been done by changing laser beam feature, existence of gap and existence of coating layer to know welding characteristics of those materials. As a result, in case of fundamental experiment with various strength steel, hardening was found in the weld metal of all tested materials and softening was found at the heat affected zone of SGAFC 1180. In case of laser butt welding of UHSS, mechanical properties was improved by using small laser beam diameter and Al-Si coating layer caused fracture of weld metal. In case of laser lap welding of UHSS, Al-Si coating layer resulted in formation of intermetallic compound at the fusion boundary where fracture occurred. Al-Si coating layer caused lowering mechanical properties of weld metal.

키워드