품질경영학회지 (Journal of Korean Society for Quality Management)

  • 제38권2호
  • /
  • Pages.171-179
  • /
  • 2010
  • /
  • 1229-1889(pISSN)
  • /
  • 2287-9005(eISSN)
한국품질경영학회 (Korean Society for Quality Management)
권호 표지

붓스트랩 $C_{pp}$ 다공정 수행분석차트

Bootstrap $C_{pp}$ Multiple Process Performance Analysis Chart

  • 투고 : 2010.05.12
  • 심사 : 2010.06.10
  • 발행 : 2010.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Pearn et al.(2002) supposed the $C_{pp}$ multiple process performance analysis chart. This chart displays multiple processes with the process variation and process departure on one single chart. But, this chart can not display the distribution of the process variation and process departure and is inappropriate for processes with non-normal distributions. With bootstrapping method, we can display the distribution of the process variation and process departure on the $C_{pp}$ multiple process performance analysis chart.

키워드

참고문헌

  1. 김진수, 김홍준, 전창희(1999), "공정능력 평가를 위한 비공정능력지수의 측도에 관한 연구", 대구산업대학교 논문집, 16권, pp. 533-545.
  2. 송서일, 이보근(1997), "치우침에 민감한 비공정능력 지수에 관한 연구", 동아대학교 부설 생산기술연구소 연구논문집, 2권, 2호, pp. 101-109.
  3. 신경식, 김성집, 강창욱(1996), "공정능력의 평가를 위한 개선된 비공정능력지수", 품질경영학회지, 24권, 4호, pp. 90-102.
  4. Benson, E. D.(1994), "Statistical Properties of a System of Fourth-generation Process Capability Indices $C_{psk}$(U, V, W), Ph. D. dissertation, University of Maryland.
  5. Chan, L. K., Cheng, S. W., and Spiring, F. A.(1988), "A New Measure of Process Capability: $C_{pm}$", Journal of Quality Technology, Vol. 20, pp. 162-175.
  6. Chen, K. L., Chen, K. S., and Li, R. K.(2005), "Suppliers Capability and Price Analysis Chart", International Journal of Production Economics, Vol. 98, pp. 315-327. https://doi.org/10.1016/j.ijpe.2004.09.010
  7. Chen, K. S., Pearn, W. L., and Lin, P. C.(2003), "Capability Measures for Processes with Multiple Characteristics", Quality and Reliability Engineering International, Vol. 19, pp. 101-110. https://doi.org/10.1002/qre.513
  8. Chou, C. Y., Lin, Y. C., Chang, C. L., and Chen, C. H.(2006), "On the Bootstrap Confidence Intervals of the Process Incapability Index $C_{pp}$", Reliability Engineering & System Safety, Vol. 91, pp. 452-459. https://doi.org/10.1016/j.ress.2005.03.004
  9. Deleryd, M. and Vannman, K.(1999), "Process Capa bility Plots-A Quality Improvement Tool", Quality and Reliability Engineering International, Vol. 15, pp. 213-227. https://doi.org/10.1002/(SICI)1099-1638(199905/06)15:3<213::AID-QRE245>3.0.CO;2-O
  10. Greenwich, M and Jahr-Schaffrath, B. L.(1995), "A Process Incapability Index", Journal of Quality & Reliability Management, Vol. 12, pp. 58-71. https://doi.org/10.1108/02656719510087328
  11. Kane, V. E.(1986), "Process Capability Indices", Journal of Quality Technology, Vol 18, pp. 41-52.
  12. Lin, G. H.(2006), "A Bayesian Approach Based on Multiple Samples for Measuring Process Performa nce with Incapability Index", International Journal of Production Economics, Vol 106, pp. 506-512.
  13. Nahar, P. C., Hubele, N. F., and Zimmer, L. S.(2001), "Assessment of a Capability Index Sensitive to Skewness", Quality and Reliability Engineering International, Vol. 17, pp. 233-241. https://doi.org/10.1002/qre.395
  14. Pearn, W. L., Kotz, S., and Johnson, N. L.(1992), "Distributional and Inferential Properties of Process Capability Indices", Journal of Quality Technology, Vol. 24, pp. 216-231.
  15. Pearn, W. L., Ko, C. H., and Wang, K. H.(2002), "A Multiprocess Performance Analysis Chart Based on the Incapability Index $C_{pp}$: An Application to the Chip Resistors", Microelectronics Reliability, Vol. 42, pp. 1121-1125. https://doi.org/10.1016/S0026-2714(02)00071-9
  16. Pearn, W. L. and Lin, G. H.(2001), "On the Reliability of the Estimated Process Incapability Index", Quality and Reliability Engineering International, Vol. 17, pp. 279-290. https://doi.org/10.1002/qre.378
  17. Pearn, W. L. and Lin, G. H.(2002), "Estimated Incapability Index: Reliability and Decision Making with Sample Information", Quality and Reliability Engineering International, Vol. 18, pp. 141-147. https://doi.org/10.1002/qre.455
  18. Pearn, W. L. and Wu, C. W.(2005), "A Bayesian Approach for Assessing Process Precision Based on Multiple Samples", European Journal of Operational Research, Vol. 165, pp. 685-695. https://doi.org/10.1016/j.ejor.2004.02.009
  19. Tang, L. C., Than, S. E., and Ang, B. W.(1997), "A Graphical Approach to Obtaining Confidence Limits of $C_{pk}$", Quality and Reliability Engineering International, Vol. 13, pp. 337-346.
  20. Vannman, K.(2005), "The Circular Safety Region: a Useful Graphical Tool in Capability Analysis", Quality and Reliability Engineering International, Vol. 21, pp. 529-538. https://doi.org/10.1002/qre.739
  21. Wright, P. A.(1995), "A Process Capability Index Sensitive to Skewness", Journal of Statistical Computation and Simulation, Vol. 52, pp. 195-203. https://doi.org/10.1080/00949659508811673
  22. Wu, C. W.(2008). "Assessing Process Capability based on Bayesian Approach with Subsamples", European Journal of Operational Research, Vol. 184, pp. 207-228. https://doi.org/10.1016/j.ejor.2006.10.054