DOI QR코드

DOI QR Code

Analysis of Radial Force on a Permanent Magnet Synchronous Motor Caused by Dimensional Variation

치수적 결함에 따른 PMSM의 법선방향 힘의 변화에 관한 연구

  • Received : 2010.09.15
  • Accepted : 2010.10.18
  • Published : 2010.11.01

Abstract

Main reasons for causing vibration in a permanent magnet synchronous motor (PMSM) are torque ripple and radial force harmonics, and hence, both of them are undesirable in high-precision machine tools and accurate motion-control actuators. Recent research on radial force is the prediction of major vibration frequencies and modes in terms of motor design such as different winding types and a fractional slot number per pole in the stator. Also, proper phase current has been investigated for minimizing radial force harmonics. During the previous studies, all the motors are assumed to be ideally built up in terms of mechanical dimensions, but it is impossible due to dimensional variation within or outside tolerance in production. Therefore, in this paper, the effect of several key factors on radial force is examined and compared regarding manufacturing imperfection.

Keywords

References

  1. Joachim Holtz and Lothar Springob, "Identification and Compensation of Torque Ripple in High- Precision Permanent Magnet Motor Drives", IEEE Trans. on Industry Electronics, vol. 43, no. 2, pp. 309-320, April 1996 https://doi.org/10.1109/41.491355
  2. Freddy Magnussen and Heinz Lendenmann, "Parasitic Effects in PM Machines With Concentrated Windings", IEEE Trans. on Industry Applications, vol. 43, no. 5, pp. 1223-1232, Sep./Oct. 2007 https://doi.org/10.1109/TIA.2007.904400
  3. Y. S. Chen, Z. Q. Zhu, and D. Howe, "Vibration of PM Brushless Machines Having a Fractional Number of Slots Per Pole", IEEE Trans. on Magnetics, vol. 42, no. 10, pp. 3395-3397, Oct. 2006 https://doi.org/10.1109/TMAG.2006.879072
  4. Weidong Zhu, Babak Fahimi, and Steve Pekarek, "A Field Reconstruction Method for Optimal Excitation of Permanent Magnet Synchronous Machines", IEEE Trans. on Energy Conversion, vol. 21, no. 2, pp. 305-313, June 2006 https://doi.org/10.1109/TEC.2005.859979