상하수도학회지 (Journal of Korean Society of Water and Wastewater)

  • 제24권3호
  • /
  • Pages.277-285
  • /
  • 2010
  • /
  • 1225-7672(pISSN)
  • /
  • 2287-822X(eISSN)
대한상하수도학회 (The Korean Society of Water and Wastewater)
권호 표지

자가발전효율 향상을 위한 유수관내 블레이드 형상의 모델링 및 해석

Modeling of Blades to Enhance Self-Power Generation in Pipe Flow

  • 투고 : 2010.04.19
  • 심사 : 2010.05.13
  • 발행 : 2010.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We examined the optimal shape of blades and efficiency of a self-power generator when the self-power generator using flow of the water in pipe as the power source was installed. Selected factors were the shape of blades, the number of blades, pitch angle, and the existence of separator. GAMBIT2.4 was used as a modeling program, FLUENT6.3, which is computational fluid dynamics simulation program, was used as an analytical model. In the case of a viscous model, k-epsilon standard model was chosen. As a result, when the number of blades was increased, the efficiency and maximum moment were enhanced slightly. The pitch of blades went up, and maximum moment was also increased. The optimal pitch of blade was 62.5 degree and the efficiency was increased by 30%. The efficiency was also increased when a separator was installed.

키워드

참고문헌

  1. Dincer, I(2000) Renewable energy and sustainable development: a crucial review, Renewable and Sustainable Energy Review, Vol. 4, pp. 157-175. https://doi.org/10.1016/S1364-0321(99)00011-8
  2. Sinton, J.E. and Fridley, D.G(2000) What goes up: Recent trends in Chinas Energy Consumption, Energy Policy, Vol. 28, pp. 671-687. https://doi.org/10.1016/S0301-4215(00)00053-7
  3. McDonald, C.F. and Rodgers, C(2002) The Ubiquitous Personal Turbine –A Power Vision for the 21st Century, Journal of Engineering for Gas Turbine and Power, Vol. 124, pp. 835-844. https://doi.org/10.1115/1.1473826
  4. Sodano, H. A., Inman, D. J. and Park, G(2004) A Review of Power Harvesting from Vibration using Piezoelectric Materials, The Shock and Vibration Digest, Vol. 36, No. 3, pp. 197-205. https://doi.org/10.1177/0583102404043275
  5. 박홍광, 이지근, 노병준(2007) 환기용 축류팬의 가이드핀 블레이드 형상변화에 따른 유동특성에 관한 연구. 설비공학논문집, 제19권, 제12호, pp.874-882.
  6. 신형기, 방형준, 김석우(2007) 블레이드 공력 설계를 위한 설계 변수 특성에 대한 연구 블레이드 공력 설계를 위한 설계 변수 특성에 대한 연구. 한국신재생에너지학회 추계학술대회 논문집, pp.361-365.
  7. 김병국, 김영호, 송우석, 이승배, 남상규, 김사만(2007) 수직축 풍력터빈 성능개선에 관한 실험적 연구. 유체기계저널, 제10권, 제5호, pp. 17-24.
  8. Bell B(2007) A Technical Opinion on A Novel Vertical-Axis Wind Turbine Concept. Garrad-Hassan Report.
  9. 신봉근, 정수인, 김귀순, 이은석(2004) 충동형 초음속 터빈 익렬의 설계 변수에 따른 익렬내 유동 특성에 관한 수치적 연구, 한국추진공학회지, 제8권, 제2호, pp.62-72.
  10. Xue, S., Docker, B. and Narramore, J(2006) Integrated Aero-Acoustics Rotor Simulation and Design Optimization, 12th AIAA/CEAS Aeroacoustics Conference, Canbridge, Massachusetts, May 8-10
  11. Hong, S. S., Kim, J. S., Choi, C. H., and Kim, J(2006) Effect of Tip Clearance on the Cavitation Performance of a Turbopump Inducer. Journal of Propulsion and Power, Vol. 22, No. 1, pp. 174-179. https://doi.org/10.2514/1.11982
  12. Cho, S. S. , Choi, J. H. and Kim, K. Y(1998) Flow analysis and design optimization of an axial-flow fan, Proceedings, SAREK Winter Annual Meeting, pp.135-140.
  13. Kim, C.S., Shin, Y.H., Kim, K.H. and Chung, J. T(1999) Experimental study on effects of stagger angle on performance and flow characteristics of axial fan, Proceedings, SAREK Summer Annual Meeting, pp.453-457.