유기 EL 성막 공정을 위한 점 증발원의 DSMC 시뮬레이션

DSMC Simulation of a Point Cell-source for OLED Deposition Process

  • 전성훈 (공주대학교 기계자동차공학부) ;
  • 이응기 (공주대학교 기계자동차공학부)
  • Jun, Sung-Hoon (Division of Mechanical & Automotive Engineering Kongju National University) ;
  • Lee, Eung-Ki (Division of Mechanical & Automotive Engineering Kongju National University)
  • 투고 : 2010.06.28
  • 심사 : 2010.07.31
  • 발행 : 2010.09.30

초록

The performance of an OLED fabrication system strongly depends on the design of the evaporation cell-source. Therefore, necessity of the preceding study for cell source development of new concept is becoming increase. A development plan to substitute for experiment is applied as use simulation. In this study interpret behavior of a particle through DSMC techniques, and in this paper presenting a form to make so as to have better performance of the pointtype cell source which had a nozzle.

키워드

참고문헌

  1. 이응기,"유기EL 디스플레이의 진공 성막 공정의 최적화에 관한 연구,"반도체 및 디스플레이장비학회지, 제7권,제1호, pp.35-40, 2008
  2. Sang Chul Lim, Seong Hyun Kim, Hye Yong Chu, Jung Hun Lee, Jeong-Ik Lee, Ji Young Oh, Dojin Kim, Taehyoung Zyung, "New Method of driving OLED with an OTFT," Synthetic Metals, vol.151,pp.197-201, 2005 https://doi.org/10.1016/j.synthmet.2005.04.008
  3. Eungki Lee, "Simulation of the thin-film thickness distribution for an OLED thermal evaporation process," Vacuum, vol. 83, pp.848-852, 2009 https://doi.org/10.1016/j.vacuum.2008.08.007
  4. Bird, G. A. "Monte Carlo Simulation of Gas Flow," Annual Review of Fluid Mechanics, Vol. 10, pp 11-31, 1978 https://doi.org/10.1146/annurev.fl.10.010178.000303
  5. Nabu, K., "Direct Simulation Scheme Derived from the Boltzmann Equation," Journal of Physics Society Japan, Vol.49, pp. 2042-2058, 1980 https://doi.org/10.1143/JPSJ.49.2042
  6. Baganoff, D and McDonald, J. D. "A Collision-Selection Rule for a Particle Simulation Methods Suited to Vector Computers," Physics of Fluids A, Vol. 2, No. 7, pp. 1248-1259, 1990 https://doi.org/10.1063/1.857625
  7. Donald L. Smith, Thin-Film Deposition, McGraw-Hill, USA, pp.94-99, 1997