참고문헌
- Chae, M. S., Lee, G. D., Suh, Y. S., Lee, K. H. and Kim, Y. S., 2008, “Mechanical and Forming Characteristics of High-Strength Boron-Alloyed Steel with Hot Forming,” Trans. Mater. Process., Vol. 18. No. 3, pp. 236-244. https://doi.org/10.5228/KSPP.2009.18.3.236
- Bannantine, J. A., Comer, J. J. and Handrock, J. L., Fundamentals of Metal Fatigue Analysis, pp. 1-30.
- Sherman, A. M. and Davies, R. G., 1981, "The Effect of Martensite Content on the Fatigue of a Dual Phase Steel," Int. J. Fatigue, January, pp. 36-40.
- Chakraborti, P. C. and Mitra, M. K., 2005, “Room Temperature Low Cycle Fatigue Behaviour of Two High Strength Lamellar Duplex Ferrite Martensite (DFM) Steels,” Int. J. Fatigue, Vol.27, pp. 511-518. https://doi.org/10.1016/j.ijfatigue.2004.09.003
- Fournell, R.A., Grey, E.A. and Fine, M.E., 1976, “Fatigue Behaviour of a Precipitation Hardening Ni-Al-Cu Medium Carbon Steel,” Metall Trans A, Vol. I, No. 7, pp. 669-682.
- Thielen, P.N., Fine, M.E. and Fournelle, R.A., 1976, “Cyclic Stress Strain Relations and Strain Controlled Fatigue of 4140 Steel,” Acta Metall, Vol. 24, pp. 1-10. https://doi.org/10.1016/0001-6160(76)90140-1
- Klesnil, M. and Lukas, P., 1967, “Fatigue Softening and Hardening of Annealed Low Carbon Steel,” J Iron Steel Inst, pp. 746-749.
- Sarma, S., Padmanabhan, V. and Low, K.A., 1997, “Cycle Fatigue Behaviour of a Medium Carbon Microalloyed Steel,” Int J Fatigue, Vol.19, No. 2, pp. 135-140. https://doi.org/10.1016/S0142-1123(96)00060-6
- Mediratta, S.R., Ramaswami, V., Singh, V. and Rama Rao, P., 1990, “Low Cycle Fatigue of Dual Phase Steels Produced by Different Cooling Rates and a Ferrite-Pearlite Steel,” Scripta Metall, Vol. 24, pp. 793-797. https://doi.org/10.1016/0956-716X(90)90244-B
- Sankaran, S., Subramanya Sarma, V. and Padmanabhan, K.A., 2003, “Low Cycle Fatigue Behavior of a Multiphase Microalloyed Medium Carbon Steel,” Materials Science and Engineering A 345, pp. 328-335. https://doi.org/10.1016/S0921-5093(02)00511-7
피인용 문헌
- A Study on the Relationship between Tensile and Low Cycle Fatigue Properties of High Strength Material vol.23, pp.2, 2014, https://doi.org/10.5228/KSTP.2014.23.2.110
- Study on Fatigue Characteristic of Suspension Part Using Hot Forming vol.37, pp.3, 2013, https://doi.org/10.3795/KSME-A.2013.37.3.339