References
- M.J. Spearpoint and G.J. Quintiere, "Predicting the Burning of Wood Using an Integral Model", Combustion and Flame, Vol.123, pp.308-324(2000). https://doi.org/10.1016/S0010-2180(00)00162-0
- W.S. Atkins, "Wood Utilisation Systems-Combustion Strateges", Energy Technolodge Support unit, Department of Energy, U.K.(1984).
- F. Shafizadeh and W.F. DeGroot, "Combustion Characteristics of Cellulosic Fuels" In: edds. F. Shafizadeh, K.V. Sarkenen, and D.A. Tillman, Thermal Uses and Properties of Carbohydrates and Lignins, Academic Press, New York, U.S.A.(1976).
- F.L Browne, "USDA Forest Service Forest Products Laboratory Report 2136", USDA Forest Service Forest Products Laboratory, Madison, Wis.1958; reviewed and refirmed(1963).
- F.C. Beall and H.W. Eickner, "Research Paper FPL 130", USDA Forest Service Forest Products Laboratory, Madison, Wis.(1970).
- D. Drysdale, "An Introduction to Fire Dynamics", john Wily & Sons, U.S.A.(1996).
- F.M. Pearce, Y.P. Khanna, and D. Raucher, "Thermal Analysis in Polymer Flammability", Chap. 8, Thermal Characterization of Polymeric Materials, Academic Press, New York, U.S.A.(1981).
- M.J. Spearpoint, "Predicting the Ignition and Burning Rate of Wood in the Cone Calorimeter Using an Intergral Model", pp.30-46. NIST GCR 99-775, U.S.A.(1999).
- L. Yang, X. Chen, X. Zhou, and W. Fan, "The Pyrolysis and Ignition of Charring Matrials Under an External Heat Flux", Combustion and Flame Vol.133, pp.407-413(2003). https://doi.org/10.1016/S0010-2180(03)00026-9
- V. Babrauskas, "New Technology to Reduce Fire Losses and Costs", eds. S.J. Grayson and D.A. Smith, Elsevier Appied Science Publisher, London (1986).
- N. Boonme and J.G. Quintiere, "Glowing and Flaming Autoignition of Wood", Twenty-ninth Symposioum (International) on combustion, The Combustion Institute, Vol.29, pp.289-296(2002).
- N. Boonme and J.G. Quintiere, "Glowing Ignition of Wood", the onset of surface combustion, Thirtieth Symposioum (International) on combustion, The Combustion Institute, Vol.30, pp.2303-2310(2005).
- E. Mikkola, "Charring of Wood Based Materials", pp.547-556, Fire Safety Science, Proceedings of the Third International Symposium, Elsevier, Applied Science, London(1991).
- J.G. Quintiere, "A Semi-quantitative Model for the Burning Rate of Solid Materials", NISTIR 4840, National Institute of Standards and Technology, Gaithersburg, MD(1992).
- M.M. Hirschler, "Fire Hazard and Toxic Potency of the Smoke from Burning Materials", Advances in Combustion Toxicology Vol.2, pp.229-230(1990).
- Y.J. Chung, "Combustion Characterisics of the Pinus Rigida and Castanea Savita Using Cone Calorimeter", Journal of Korean Forest Society, Vol.98, No.3, pp.319-323(2009).
- ISO 5660-1, "Reaction-to-Fire Tests NHeat Release, Smoke Production and Mass Loss Rate - Part 1: Heat Release Rate (Cone Calorimeter Method)" (2002).
- EN 13823, "Reaction to Fire Tests for Building Products. Building Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item"(2002).
- M. Hirschler, "Thermal Decomposition and Chemical Composition", pp.239-300, American Chemical Society Symposium Series 797(2001).
- W.T. Simpso, "Drying and Control of Moisture Content and Dimensional Changes", Chap. 12, pp.1- 21, In: Wood Handbook-Wood as an Engineering Material, Forest Product Laboratory U.S.D.A., Forest Service Madison, Wisconsin, U.S.A.(1987).
- J.D. DeHaan, "Kirks's Fire Investigation", pp.84-112. fifth edition, Prentice Hall(2002).
- V. Babrauskas, "Development of Cone Calorimeter- A Bench-scale Heat Release Rate Apparatus Based on Oxygen Consumption", Fire and Materials, Vol.8, No.2, pp.81-95(1984). doi: 1002/fam.810080206.
- V. Babrauskas and S.J. Grayson, "Heat Release in Fires", p.644, E & FN Spon (Chapman and Hall), London, UK(1992).
- H.C. Tran and R.H. White, "Burning Rate of Solid Wood Measured in a Heat Release Calorimeter", Fire and Materials, Vol.16, pp.197-206(1992). https://doi.org/10.1002/fam.810160406
- V. Babrauskas, "Heat Release Rate", Section 3, In: The SFPE Handbook of Fire Protection Engineering, Fourth ed., National Fire Protection Association, Massatusetts, U.S.A.(2008).
- J.G. Quintire, "Principles of Fire Behavior", Chap. 5, Cengage Learning, Delmar, U.S.A.(1998).
- M. Risholm-Sundman, M. Lundgren, E. Vestin, and P. Herder, "Emissions of Acetic Acid and other Volatile Organic Compounds from Different Species of Solid Wood", Holz alas Rohund Werkstoff, Vol.56, No.2, pp.125-129(1998). https://doi.org/10.1007/s001070050282
- A.D. Chirico, M. Armanini, P. Chini, G. Cioccolo, F. Provasoli, and G. Audiso, "Flame Retardants for Polypropylene Based on Lignin", Polymer Degradation and Stability, Vol.79, pp.139-145(2002).
- T.R. Hull and K.T. Paul, "Bench-sacale Assessment of Combustion Toxicity-A Critiacal Analysis of Current Protocols", Fire Safety Journal, Vol.42, pp.340-365(2007). https://doi.org/10.1016/j.firesaf.2006.12.006
- M. Staudt, N. Bertin, U. Hansen, G. Seufert, P. Cieeioli, P. Foster, B. Frenzel, J.L. Fugit, and L. Torres, "The BEMA-project: Seasonal and Diurnal Patterns of Monoterpene Emissions from Pinus Pinea (L.)", Atmospheric Environment, Vol.31, pp.145-156(1997).