Modeling of Organic Schottky Diodes for Circuit Simulations

회로 시뮬레이션을 위한 유기물 쇼트기 다이오드 모델링

  • Kim, Hyo-Jong (Department of Electrical Engineering, Chungbuk National University) ;
  • Baatar, Nyambayar (Department of Electrical Engineering, Chungbuk National University) ;
  • Kim, Shi-Ho (Department of Electrical Engineering, Chungbuk National University)
  • Received : 2010.02.10
  • Accepted : 2010.05.22
  • Published : 2010.06.25

Abstract

A semi-empirical organic schottky diode model is proposed for circuit simulation. We have set up a full custom design environment for organic schottky diode circuit using Spectre AHDL, which is widely used commercial EDA tool. We measured frequency response from fabricated rectifier, and it was compared to circuit simulation results using the AHDL model. The frequency response of the fabricated rectifier circuit is not sufficient for 13.56MHz RFID, however, it is enough for 135kHz-band RFID.

유기물 쇼트기 다이오드 회로 설계시에 사용가능한 소자의 모델을 구현하였다. AHDL을 이용하여 상용 CAD 환경으로 보편적으로 사용되는 Spectre의 설계환경에서 측정 결과를 입력 파라미터로 반영하여 회로 시뮬레이션을 할 수 있는 환경을 구성하였다. 유기물 RFID의 구현에 필수적인 정류회로를 제작하여 회로의 주파수 특성을 측정하였으며, AHDL 모델을 사용한 시뮬레이션 결과와 비교하였다. 제작된 정류회로의 주파수 특성은 13.56MHz의 RFID 동작을 만족시키기에는 부족하지만, 135kHz 주파수 대역 RFID에서는 동작이 가능하다.

Keywords

References

  1. 이문석, "C60(buckminsterfullurene) 홀주입층을 적용한 유기박막트랜지스터의 성능향상", 전자공학회논문지-SD편 제5호, pp. 19-25, 2008. 5
  2. K. Myny, et. al, "An Inductively-Coupled 64b Organic RFID Tag Operating at 13.56MHz with a Data Rate of 787b/s", ISSCC 2008, pp. 290-291.
  3. $Spectre^{TM}$ AHDL Manual, Cadence design system
  4. Klaus Dimmler, "Printed RFID Technology," Organic Electronics Conference & Exhibition, 2006.
  5. Soeren Steudel, K. Myny, V. Arkhipov C. Deibel, S. Vusser, J. Genore and P. Heremans, "50MHz rectifier based on an organic diode" Nature Materials, vol. 4 (2005), pp. 599-597.