참고문헌
- Bartlett M, "Developing humidified gas turbine cycles," doctoral thesis, 2002
- Dalili F, "Humidification in evaporative power cycles," doctoral thesis, 2003
- Jonsson M. and Yan J., "Humidified gas turbines - a review of proposed and implemented cycles," Energy, Vol. 30, pp. 1013-1078, 2005 https://doi.org/10.1016/j.energy.2004.08.005
- Poullikkas A., "An overview of current and future sustainable gas turbine technologies," Renewable and Sustainable Energy Reviews, Vol. 9, 2005, pp.409-443 https://doi.org/10.1016/j.rser.2004.05.009
- Yari M.; Sarabchi K. "Comparative investigation of various humidified gas turbine cycles," ASME TURBO EXPO, GT2004-543, 2004
- Bhargava R. and Meher-Homji C. B., "Parametric analysis of existing gas turbines with inlet evaporative and overspray fogging," ASME J. of Engineering for Gas Turbines and Power, Vol. 127, 2005, pp.145-158 https://doi.org/10.1115/1.1712980
- Kim K. H. and Perez-Blanco H., "An assessment of high-fogging potential for enhanced compressor performance," ASME paper No. GT2006-90482, Barcelona, 2006
- Khaliq A., Choudhary K., "Thermo dynamic performance assessment of an indirect intercooled reheat regenerative gas turbine cycle with inlet air cooling and evaporative aftercooling of the compressor discharge, Int. J. Energy Research, Vol. 30, 2006, pp.1295-1312 https://doi.org/10.1002/er.1221
- Perez-Blanco H., Kim K. H., and Ream S., "Evaporatively-cooled compression using a high-pressure refrigerant, Applied Energy, Vol. 84, 2007, pp.1028-1043 https://doi.org/10.1016/j.apenergy.2007.02.013
- Kim K. H. and Perez-Blanco H., "Potential of regenerative gas-turbine systems with high fogging compression," Applied Energy, Vol. 84, 2007, pp.16-28 https://doi.org/10.1016/j.apenergy.2006.04.008
- Bassily A. M., "Effects of evaporative inlet and aftercooling on the recuperated gas turbine cycle," Applied Thermal Eng., Vol. 21, pp. 1875-1890, 2001 https://doi.org/10.1016/S1359-4311(01)00054-0
- Nishida K., Takaki T., and Kinoshita S., "Regenerative steam-injection gas-turbine systems," Applied Energy, Vol. 81, 2005, pp.231-246 https://doi.org/10.1016/j.apenergy.2004.08.002
- Cengel Y. A. and Boles M. A., "Thermodynamics. An engineering approach," 5th Ed., McGraw-Hill, 2006
- Cengel Y., "Heat and mass transfer. A practical approach," 3rd Ed., McGraw-Hill, 2006
- Wilson D. G. and Korakianitis T., "The design of high-efficiency turbomachinery and gas turbines," 2nd ed., Prentice Hall, Ch. 2, 1998