Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Development of Miniaturized High-Speed Air Spindle for Micro-Meso Components

미세부품가공을 위한 소형 초고속에어스펀들 개발

  • 이승준 (부산대학교 나노융합기술학과) ;
  • 신인동 (부산대학교 나노융합기술학과) ;
  • 최수창 (부산대학교 나노융합기술학과) ;
  • 김용우 (부산대학교 나노융합기술학과) ;
  • 이종렬 (테크노라이즈(주)) ;
  • 이득우 (부산대학교 나노메카트로닉스공학과)
  • Received : 2010.01.13
  • Accepted : 2010.03.12
  • Published : 2010.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

The development of high-speed spindle have been studied extensively for micro machining in advanced industrial countries. The research of miniaturized high-speed air spindle is important part which needs for the micro machining process of high quality. So, This study was to carry out results about design characteristics of miniaturized high-speed air spindle. We had designed 4type turbines and shaft. They were simulated in use the computer simulation programs. We made them as products. They measured RPM (revolutions per minute). As a result of experiments, there was a contrast among 4type Turbines. it reached 384,000rpm in 4.5bar of air pressure. And, We tried to compare the results of measurement whit the results of computer simulation.

Keywords

References

  1. Yueui, S. J, 2000, Advanced materials application strategy, Sungindang, Korea, a foreword.
  2. Lee, S. J., Kim, Y. l., Choi, S. C., Lee, D. W., and Lee J. R,. 2007, "A study on the design technology of 300,000rpm air bearing spindle for Micro-meso components", Proceedings of the KSMPE Spring Conference 2007, pp. 43-44.
  3. Lee, S. J., Kim, Y. W., Kim, K. S., Lee, D. W., Han, M. C., and Lee J. R, 2007, "The dental handpiece: Consideration of the design and manufacture", Korea, Proceedings of the KSMPE autumn conference 2007, pp. 105-106.
  4. Balancetech corp., 1998, Barancetech staff, viewed 20 January 2009, . technical data.
  5. Roberson, J. A., Cassidy, J. J., and Chaudhry, M. H., 1998, "Hydraulic engineering. 2nd edition", Wiley, New York.
  6. $Fine^{TM}$/Turbo, 2004, $Fine^{TM}$/Turbo User manual Version 7, NUMECA Inc., Belgium.
  7. Small Business Training Institute in Small Business Corporation, Balancing measurement Technology, Small business training institute in Small Business corporation, Korea, pp. 39-40.
  8. Silva, D. and Clarence, W., 2000, Vibration: Fundamentals and Practice, CRC press, New York.