DOI QR코드

DOI QR Code

Performance-based structural fire design of steel frames using conventional computer software

  • Chan, Y.K. (Charterwealth Professional Ltd.) ;
  • Iu, C.K. (Charterwealth Professional Ltd.) ;
  • Chan, S.L. (The Hong Kong Polytechnic University) ;
  • Albermani, F.G. (The University of Queensland)
  • 투고 : 2008.12.29
  • 심사 : 2010.04.01
  • 발행 : 2010.05.25

초록

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second-order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.

키워드

과제정보

연구 과제번호 : Advanced Analysis for Progressive Collapse and Robustness Design of Steel Structures

연구 과제 주관 기관 : Research Grants Council (RGC)

참고문헌

  1. ARBED - Research, Luxembourg/ Department of Bridge and Structural Engineering, University of Liege, Belgium - REFAO/CAFIR, computer assisted analysis of the fire resistance of steel and composite steelconcrete structures. CEC research 7210-SA/ 502, Technical reports 1 to 6, 1982/85.
  2. ARBED - Research, Luxembourg, University of Liege, Belgium, Buckling curves in case of fire. CEC reseach 7210-SA/515/931/316/618, 1992/95.
  3. BS5950 Part 8 (1990), Structural use of steelwork in building: Code of practice for fire resistant design.
  4. Bailey, C.G. (1998), "Development of computer software to simulate the structural behaviour of steel-framed building in fire", Comput. Struct., 67(6), 421-438. https://doi.org/10.1016/S0045-7949(98)00096-0
  5. Chan, S.L. (1988), "Geometric and material nonlinear analysis of beam-columns and frames using minimum residual displacement method", Int. J. Numer. Meth. Eng., 26(12), 2657-2669. https://doi.org/10.1002/nme.1620261206
  6. Chan, S.L. and Zhou, Z.H. (1995), "Second order elastic analysis of frames using single imperfect element per member", J. Struct. Eng.-ASCE, 121(6), 939-945.
  7. Crisfield, M.A. (1981), "A faster incremental-iterative solution procedure that handles snap-through", Comput. Struct., 13(1-3), 55-62. https://doi.org/10.1016/0045-7949(81)90108-5
  8. Dotreppe, J.C., Franssen, J.M. and Schleich, J.B. (1982), Computer aided fire resistance for steel and composite structures, Review acier/Stahl/Steel No. 3.
  9. El-Zanaty, M.H. and Murray, D.W. (1983), "Nonlinear finite element analysis of steel frames", J. Struct., 109(2), 353-368. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:2(353)
  10. Eurocode 3. (1993), Design of steel structures, Pt. 1.2: structural fire design(draft). European Committee for Standardization.
  11. Franssen, J.M. (1987), Etude du comportement au feu des structures mixtes acier-beton (CEFICOSS). A study of the behaviour of composite steel-concrete structures in fire, These de Doctorat Belgique University de Liege.
  12. Franssen, J.M. (1990), "The unloading of building materials submitted to fire", Fire. Safety. J., 16(3), 213-237. https://doi.org/10.1016/0379-7112(90)90034-C
  13. Franssen, J.M., Kodur, V.K.R. and Mason, J. (2000), User's manual for SAFIR: a computer program for analysis of structures submitted to fire. Internal Report SPEC/2000_03, Belgium, University of Liege, Ponts et Charpentes.
  14. Huang, Z., Burgess, I.W. and Plank, R.J. (1999), "Nonlinear analysis of reinforced concrete slabs subjected to fire", ACI Struct. J., 96(1), 127-135.
  15. Huang, Z., Burgess, I.W. and Plank, R.J. (2000), "Three-dimensional analysis of composite steel-framed buildings in fire", J. Struct. Eng. -ASCE, 126(3), 389-397. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(389)
  16. ISO 834(1985): Fire resistance test - elements of building construction, International Standards Organization.
  17. Iu, C.K. and Chan, S.L. (2004), "A simulation-based large deflection and inelastic analysis of steel frames under fire", J. Constr. Steel Res., 60(10), 1495-1524. https://doi.org/10.1016/j.jcsr.2004.03.002
  18. Iu, C.K., Chan, S.L. and Zha, X.X. (2005), "Nonlinear pre-fire and post-fire analysis of steel frames", Eng. Struct., 27(11), 1689-1702. https://doi.org/10.1016/j.engstruct.2005.06.003
  19. Iu, C.K., Chan, S.L. and Zha, X.X. (2007), "Material yielding by both axial and bending spring stiffness at elevated temperature", J. Constr. Steel Res., 63(5), 677-685. https://doi.org/10.1016/j.jcsr.2006.06.037
  20. Jeanes, D.C. (1982), Predicting fire endurance of steel structures, Preprint 82-033, ASCE Convention, Nevada, April 26-30, ASCE.
  21. Jeanes, D.C. (1985), "Applications of the computer in modeling the endurance of structural steel floor systems", Fire. Safety. J., 9(1), 119-135. https://doi.org/10.1016/0379-7112(85)90034-7
  22. Kirby, B.R. (1996), "British steel technical European fire test programme: design, construction and results", Proceedings of the 2nd Cardington conference: Fire, static and dynamic tests of building structure, 2, 111-126.
  23. Kirby, B.R. (1997), "Large-scale fire tests: the British steel European collaborative research programme on the BRE 8-storey frame", Fire safety science: Proceedings of the fifth international symposium, 5, 1129-1140.
  24. Landesmann, A., Batista, E.M. and Drummond Alves, J.L. (2005), "Implementation of advanced analysis method for steel-framed structures under fire conditions", Fire. Safety. J., 40(4), 339-366. https://doi.org/10.1016/j.firesaf.2005.02.003
  25. Liew, J.Y.R., Tang, L.K., Holmaas, T. and Choo, Y.S. (1998), "Advanced analysis for the assessment of steel frames in fire", J. Constr. Steel. Res., 47(1), 19-45. https://doi.org/10.1016/S0143-974X(98)80004-7
  26. Liew, J.Y.R. (2004), "Performance based fire safety design of structures - A multi-dimensional integration", Adv. Struct. Eng., Multi-Science, 7(4), 111-133. https://doi.org/10.1260/136943304322985800
  27. Lim, L., Buchanan, A., Moss, P. and Franssen, J.M. (2004a), "Computer modeling of restrained reinforced concrete slabs in fire conditions", J. Struct. Eng., 130(12), 1964-1971. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1964)
  28. Lim, L., Buchanan, A., Moss, P. and Franssen, J.M. (2004b), "Numerical modeling of two-way reinforced concrete slabs in fire", Eng. Struct., 26(8), 1081-1091. https://doi.org/10.1016/j.engstruct.2004.03.009
  29. Ma, K.Y. and Liew, J.Y.R. (2004), "Nonlinear plastic hinge analysis of three-dimensional steel frames in fire", J. Struct. Eng. -ASCE, 130(7), 981-990. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:7(981)
  30. Najjar, S.R. and Burgess, I.W. (1996), "A nonlinear analysis for three-dimensional steel frames in fire conditions", Eng. Struct., 18(1), 77-89. https://doi.org/10.1016/0141-0296(95)00101-5
  31. NIDA (2007), Non-linear integrated design and analysis (NAF-NIDA), version 7.
  32. Schleich, J.B., Dotreppe, J.C. and Franssen, J.M. (1986), "Numerical simulations of fire resistance tests on steel and composite structural elements or frames", Fire Safety Science: Proceedings of the First International Symposium, 311-323.
  33. Plank, R.J., Burgess, I.W. and Bailey, C.G. (1996), "Modeling the behaviour of steel-framed building structures by computer", Proceedings of the 2nd Cardington conference: Fire, static and dynamic tests of building structures, 2, 145-160.
  34. Rubert, A. and Schaumann, P. (1986), "Structural steel and plane frame assemblies under fire action", Fire. Safety. J., 10(3), 173-184. https://doi.org/10.1016/0379-7112(86)90014-7
  35. Saab, H.A. and Nethercot, D.A. (1991), "Modelling steel frame behaviour under fire conditions", Eng. Struct., 13(4), 371-382. https://doi.org/10.1016/0141-0296(91)90024-7
  36. Sanad, A.M., Rotter, J.M., Usmani, A.S. and O'Connor, M.A. (2000), "Composite beams in large buildings under fire: numerical modeling and structural behaviour", Fire Safety. J., 35(3), 165-188. https://doi.org/10.1016/S0379-7112(00)00034-5
  37. Vila Real, P.M.M., Lopes, N., Simoes da Silva, L., Piloto, P. and Franssen, J.M. (2004), "Numerical modeling of steel beam-columns in case of fire-comparisons with Eurocode3", Fire Safety. J., 39(1), 23-39. https://doi.org/10.1016/j.firesaf.2003.07.002

피인용 문헌

  1. Investigation of the thermal response and breakage mechanism of point-supported glass facade under wind load vol.186, pp.None, 2010, https://doi.org/10.1016/j.conbuildmat.2018.07.114