DOI QR코드

DOI QR Code

복합소재패널을 이용한 반강접 중저층 강골조의 내진성능평가

Evalution of Earthquake Resistance capacity of Semi-rigid Mid/Low-rise Steel Frame using Composite Panel

  • Chang, Chun-Ho (Department of Civil Engineering, Keimyung University) ;
  • Lee, Taek-Woo (Department of Civil Engineering, Keimyung University)
  • 투고 : 2010.02.26
  • 심사 : 2010.05.13
  • 발행 : 2010.05.31

초록

본 연구의 목적은 복합소재패널 즉 FRP 내력패널을 이용한 반강접 강골조의 내진성능평가이다. 강골조의 최적내진보강을 제안하기 위하여 중약지진 규모의 지진자료를 이용하여 모멘트골조에 복합소재패널의 보강위치를 바뀌어가며 해석을 수행하였다. 복합소재패널이 보강된 강골조의 지진해석은 시간이력해석을 이용하여 수행하였으며, 활용된 지반운동자료는 미국 NEHRP 프로젝트의 모멘트저항 골조에 활용한 자료 중, 50년 동안 지진이 일어날 가능성 10%, 50%의 확률을 가진 지진 20개씩을 활용하였다. 접합부는 현장에 많이 쓰이고 있는 반강접 접합부를 고려하였으며, 복합소재패널 연결부는 비선형 연결요소는 GAP을 사용하였다. 복합소재패널을 이용한 강골조가 패널을 보강하지 않은 무보강에 비해 보강패턴에 따라 보강효과를 검증해 보았으며, 보강 후 구조물응답에 대하여 고찰하였다.

This paper presented regarding an parametric study to investigate seismic capacity evaluation of semi-rigid steel frame infilled with composit panel. In order to propose the optimum retrofit of the steel frame, we analysed the various pattern of retrofitted steel frame subjected to weak/medium earthquake. Steel frame with composit panel was analysed by Time history analyses analysis. The model were analysed using the suites of ground motion developed by NEHRP project on steel moment resisting frame. These earthquakes consist of 20 horizontal ground acceleration record each, i.e., a 10%, 50% probability of accidence in a 50 year period. We considered the semi-rigid connection which are commonly used in field, and modeled the nonlinear connection element (GAP) between panel and frame. It was shown that how is the steel frame with composit panel effected. We also examined the response of retrofitted frame.

키워드

참고문헌

  1. 문창권 ․ 타까꾸 아끼라. "고분자 복합재료" , 시그마프레스, pp.1-10, pp.329-333, 2000.
  2. 정원석. "FRP내력패널로 보수․보강된 반강접 강골조 구조물의 내진거동 예측", 경북대학교, 2004.
  3. 최완철, 박진우, "콘크리트 구조물 보강용 FRP 시스템의 재료 특성", 구조보강 연구회, (주) 컨트라넷, 2000.
  4. 한국건설기술연구원, "내진설계연구(II) 1권-내진설계성능 기준과 경제성평가", 한국지진공학회, 건설교통부. 1997.
  5. 한국건설기술연구원, "내진설계연구(II) 1권-내진성능 향상", 한국지진공학회, 건설교통부, 1997.
  6. "강구조 편람." 한국강구조학회, 2000.
  7. "Seismic evaluation and retrofit of concrete buildings" Vol 1, ATC-40, 1996.
  8. "Seismic evaluation and retrofit of concrete buildings", Vol. 2, ATC-40, 1996.
  9. Atorod Aziznamini, Associate Member, ASCE, and James B. Radziminski, Member, "Static and Cyclic Performance of Semirigid Steel Beam-to-Column Connections", pp.2979-2986, 1989.
  10. Balaur S. Dhillon, Fellow, ASCE, and James W. O`Malley III, Associat Member, "Interactive Design of Semirigid Steel Frames", Journal of Structural Engineering, pp.556-558, 1999.
  11. BSSC, "NEHRP Recommended provisions for seismic regulations for new buildings and other structures," FEMA 450, Part 1, 2004.
  12. F.C. Rodrigues, A.C. Saldanha and M.S. Pfeil. . "Non-linear Analysis Steel Frames with Semi-rigid connections", pp.94-97, 1998.
  13. J.C. Awkar and E.M. Lui. "Seismic Analysis and Response Multistory Semirigid Frames", pp.425-426, 1997.
  14. Meier, J.G. "Reinforced concrete mechanics and design", PRENTICE-HALL International, Inc, 1997.
  15. Menegotto and Pinto, "Steel Model used in SeismoStruct", 1973.
  16. Moy, S.SJ. Editor, "FRP Composite-Life Extension and Stengthe Metallic Structure", Thomas Telford Publishing, 2001.
  17. Raffaele Pucinotti., "Top-and-Seat and Web Angle Connections", pp.661-662, 2001.
  18. The Concrete Society, "Design Guidance for Strengthening Constructures Using Fiber Composite Materials", Technical Report No.55, Concrete Society, 2000.
  19. Wai-Fah Chen, Member, "Semirigid St Beamto-Column Connections: Data Base and Modeling , pp.105-113. 1989.
  20. Wooyoung Jung, "Seismic Retrofitting of Semi-rigid Frames Using Polymer Matrix Composite Materials", Ph.D. Dissertatio State University of New York at Buffalo, USA., 2003.