References
- Kunz, H. J. and Song, K. N., 1987, Fuel Assembly Mechanical Design Manual, Siemens/KWU Work-Report U6 312/87/e326.
- Kim, H. K. et al., 1997, Analysis Report on the Spacer Grid US Patent Registered in USA, KAERI/TR-867/97.
- Lee, S. H., Song, K. N., and Kim, J. Y., 2007, "Design Improvement of an OPT-H Type Nuclear Fuel Rod Support Grid Using an Axiomatic Design and an Optimization," J. of Mechanical Science and Technology, Vol. 21, pp. 1191-1195. https://doi.org/10.1007/BF03179035
- Lee, S. B., Song, K. N., and Kim, Y. W., 2008, "Parametric Study for a Dimple Location in a Spacer Grid Under the Critical Impact Load," J. of Mechanical Science and Technology, Vol. 22, pp. 2024-2029. https://doi.org/10.1007/s12206-008-0620-5
- Song, K. N. and Kim, S. S., 2007, "Determination of Optimum Welding Parameters for a Laser Welded Spacer Grid Assembly for PWRs," J. of Laser Micro/Nanoengineering, Vol. 2, No. 1, pp. 95-99. https://doi.org/10.2961/jlmn.2007.01.0017
- Song, K. N. and Kim, S. S., 2007, Korea Patent # 770944.
- Song, K. N., Lee, S. B., Lee, J. J., and Park, G. J., 2008, "Design Variables That Affect the Crush Strength of a PWR Spacer Grid Assembly," Proc. of KNS Fall Meeting, PyeongChang, Korea.
- Song, K. N. and Lee, S. B., 2008, "Effect of a Dimple Location in a Spacer Grid on the Impact Strength," ICONE16-48144, May11-15, Orlando, Florida, USA. https://doi.org/10.1115/ICONE16-48144
- Song, K. N., Lee, S. B. and Lee, A. H., 2010, "New Spacer Grid to Enhance the Mechanical/ Structural Performance," Journal of Nuclear Science and Technology, Vol. 47, No. 3, pp. 295-303. https://doi.org/10.3327/jnst.47.295
- Song, K. N. and Lee, S. B., 2007, "Analysis of Impact Strength Due to the Variation of Weld Length for the Nuclear Spacer Grid Assembly," Proc. of KSME Fall Meeting, PyeongChang, Korea.
- Song, K. N. and Lee, S. B., 2009, "Analysis of Crush Strength Test Results for a Spacer Grid Assembly of a LWR Nuclear Fuel Assembly," Proc. of KSME Spring Meeting, Seoul, Korea.
- Lee, S. B. and Song, K. N., 2007, "The Evaluation of Impact Strength of IFM Support Grid and Its Experimental Verification," Proc. of KNS Fall Meeting, PyeongChang, Korea.
- Leuker, 1987, "Buckling Strength of Spacer Grid," Siemens-KWU Test Report U9/213/87/137e.
- Shiffer, 1988, "Fuel Mechanical Test Report," Siemens-KWU Work Report U6/312/88/e 121a.
- Kim, K. T., 2002, "Development of Advanced Nuclear Fuel for KSNPs," Final Report Submitted to MOST.
- Yoon, K. H. and Song, K. N., 2006, "Buckling Behavior as the Configuration of a Grid Assembly Under Later Impact Load," Proc. of 1st KSME Material and Fracture Section Meetings.
- ASTM E8M-99, 1999: Standard Test Methods for Tension Testing of Metallic Materials.
- ABAQUS/Standard Version 6.8 User's Manual, 2009, H.K.S., USA.
- Song, K. N., Yoon, K. H. and Lee, J. J., 2005, "Development of Impact Analysis Model on the Spcaer Grid Assembly for Pressurized Light Water Reactor Fuel," Proc. of KSME CAE Section Spring Meeting, Seoul, Korea.
- Song, K. N. and Lee, S. B., 2008, "Suggestions to Enhance the Crush Strength of a LWR Spacer Grid Assembly," Proc. of KNS Spring Meeting, Gyeongju, Korea.
- Song, K. N., Lee, S. H. and Lee, S. B., 2008, "Impact Analysis and Test for the Spacer Grid Assembly of a Nuclear Fuel Assembly," Int. J. of Modern Physics B, Vol. 22, No. 9, 10 & 11, pp. 1228-1234. https://doi.org/10.1142/S021797920804658X
Cited by
- Determination of Flow Stress of Zircaloy-4 Under High Strain Rate Using Slot Milling Test vol.37, pp.1, 2013, https://doi.org/10.3795/KSME-A.2013.37.1.067
- Study on Characteristics of Sliding Support for Fuel Rod vol.35, pp.2, 2011, https://doi.org/10.3795/KSME-A.2011.35.2.201