Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

18-step Back-to-Back Voltage Source Converter with Pulse Interleaving Circuit for HVDC Application

  • Lee, Hye-Yeon (HVDC Research Team, LS Industrial Systems) ;
  • Jeong, Jong-Kyou (Department of Electrical Engineering Myongji University) ;
  • Lee, Ji-Heon (Department of Electrical Engineering Myongji University) ;
  • Han, Byung-Moon (Department of Electrical Engineering Myongji University) ;
  • Choi, Nam-Sup (Division of Electrical Electronic Communication and Computer Engineering, Chonnam National University) ;
  • Cha, Han-Ju (Department of Electrical Engineering, Chungnam National University)
  • Received : 2010.01.13
  • Accepted : 2010.03.09
  • Published : 2010.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes an 18-step back-to-back (BTB) voltage source converter using four sets of 3-Level converter modules with auxiliary circuits to increase the number of steps. The proposed BTB voltage source converter has the independent control capability of active power and reactive power at the interconnected ac system. The operational feasibility of the proposed BTB converter was verified through many simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was verified through experimental results with a scaled hardware prototype. The proposed BTB converter could be widely applied for interconnecting the renewable energy source to the power grid.

Keywords

References

  1. S. Mori, et al., “Development of large static var generator using self-commutated inverters for improving power system stability”, IEEE Trans. on Power System, vol. 8, no. 1, pp. 371-377, Feb. 1993. https://doi.org/10.1109/59.221218
  2. C. Schauder, et. al., “Development for a ${\pm}100MVar$ static condenser for voltage control of transmission systems”, IEEE Trans. on Power Delivery, vol. 10, no. 3, pp. 1486-1493, July 1995. https://doi.org/10.1109/61.400933
  3. D. Ramey, “Design, Installation, and Operation of American Electric Power (AEP) 320MVA Unified Power Flow Controller (UPFC)”, EPRI (Electric Power Research Institute), Palo Altos, CA, Tech. Rep. TR-113839, Nov. 1999.
  4. S. Masukawa and S. Iida, “A Method for Reducing Harmonics in Output Voltages of a Double-Connected Inverter”, IEEE Trans. on Power Electronics, vol. 9, no. 5, pp. 543-550, Sept. 1994. https://doi.org/10.1109/63.321039
  5. B. Han, S. Baek, B. Bae, J. Choi, “Back-to-Back HVDC system using a 36-step voltage source converter”, IEE Proc. Gener. Transm. Distrib., vol. 153, no. 6, pp. 677-683, Nov. 2006. https://doi.org/10.1049/ip-gtd:20060053
  6. L. Yonghe, J. Arrillaga and N. Watson, “EMTDC Assessment of a New Type of VSC for Back to back HVdc Interconnections”, International Conference on Power system Transients-IPST 2003 in New Orleans, USA, pp. 1-5.
  7. L. Yonghe, J. Arrillaga and N. Watson, “Multi-level voltage sourced conversion by voltage reinjection at six times the fundamental frequency”, IEE Proc. on Electrical Power Application, vol. 149, no. 3, pp. 201-207, May 2002. https://doi.org/10.1049/ip-epa:20020179
  8. K. Oguchi, et. al., “A Novel Six-Phase Inverter System with 60-Step Output Voltage for High-Power Motor Drives”, IEEE Trans. on Industry Applications, vol. 35, no.5, pp. 1141-1149, July 1995. https://doi.org/10.1109/28.793376
  9. K. Oguchi, Y. Maki and Y. Sunaga, “Three-Phase Multilevel Voltage Source Converters with Low Switching Frequencies and Less-Distorted Input Voltages,” Industry Applications Society Annual Meeting, Conference Record of the 1993, IEEE, vol. 2, pp. 870-878, Oct. 1993.

Cited by

  1. Power flow modeling of Back-to-Back STATCOM: Comprehensive simulation studies including PV curves and PQ circles vol.8, pp.3, 2017, https://doi.org/10.1016/j.asej.2016.07.004
  2. DC Micro-Grid Operational Analysis with a Detailed Simulation Model for Distributed Generation vol.11, pp.3, 2011, https://doi.org/10.6113/JPE.2011.11.3.350