Abstract
A study for the nonlinear analysis method of prestressed concrete(PSC) girders with external tendons is presented. The PSC girders with external tendons show the complex nonlinear behavior due to the slip of external tendons at deviator and the change of eccentricity between the girders and external tendons. The external tendon between anchorage-deviator or deviator-deviator is modeled as an assemblage of the curved elements. The slip effect of the external tendon at deviator is taken into account using the force equilibrium relationship between the friction force and the driving force at each deviator. The finite element model and analysis method of the external tendon suggested herein are integrated in the nonlinear analysis program of segmentally erected PSC frames developed by the authors. The proposed analysis method is verified through the comparison of the analysis and experimental results obtained from other investigators. From the ultimate analysis results of PSC beams with external tendons having different number of deviators, the yielding and ultimate loads of PSC beams found to be increased as the number of deviators are increased. In addition, the ultimate capacity of the PSC beam increases according to the increase of friction coefficient between deviator and external tendon, whereas found to decease over the certain value of friction due to the effect of the moment transmitted to the member by the friction force exerted from the external tendon.
이 논문에서는 외부강선으로 긴장된 PSC 거더의 비선형 해석방법에 대한 연구를 수행하였다. 외부강선은 정착부와 편향부에서만 부재와 일체로 거동을 하고 정착부-편향부, 편향부-편향부 사이에서 독립적인 거동을 보이는 특성으로 인해 구조물의 처짐이 증가할 경우 부재와 외부강선의 편심량이 감소하여 모멘트가 변화하는 2차 효과(secondary effect)가 발생한다. 또한 편향부에서 외부강선의 인장력 차이로 인해 슬립(slip)이 발생할 경우 외부강선의 인장력이 재분배되어 복잡한 비선형 거동을 보이게 된다. 이 논문에서는 정착부-편향부, 편향부-편향부 사이의 외부강선을 여러 개의 곡선요소로 모사하고, 편향부에서의 마찰력과 driving force(미끄러지는 힘)의 평형관계를 이용하여 외부강선의 인장력을 재분배함으로써 편향부에서의 슬립효과를 고려하였다. 이 논문에서 제시한 외부강선의 유한요소모델과 해석방법을 저자들이 개발한 시공단계를 고려한 PSC 뼈대의 비선형 해석 프로그램에 통합하고, 외부강선으로 긴장된 PSC 보의 해석에 적용하여 외부강선에 대한 유한요소모델 및 해석방법의 정당성과 적용성을 확인하였다. 또한 편향부의 수와 편향부에서의 마찰계수에 따른 극한거동을 검토해본 결과, 편향부의 수가 증가할수록 PSC 보의 항복하중과 극한하중은 증가하였으며, 편향부에서의 마찰계수에 따른 극한거동은 외부강선과 편향부 사이의 마찰력으로 인해 부재에 전달되는 모멘트의 영향에 따라 마찰계수가 적정한 값일 경우에 극한내력이 최대치를 보이는 것을 확인하였다.