참고문헌
- T. Kwak, “Microstructure Analysis for Efficiency Grinding of Structural Ceramics,” J. Kor. Soc. Prec. Eng., 24 [10] 31-6 (2007).
- T. Kwak and H. Ohmori, “Nano-level Mirror Surface Machining Technology for SiC Ceramics Mirror,” J. Kor. Soc. Prec. Eng., 23 [6] 29-36 (2006).
- Y. Dai, H. Ohmori, Y. Watanabe, H. Eto, W. Lin, and T. Suzuki, “Subsurface Properties of Ceramics for Lightweight Mirrors after ELID Grinding,” Int. J. of Jpn. Soc. of Mech. Eng., Series C, 47 [1] 66-71 (2004).
- H. Ohmori and T. Nakagawa, “Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID(Electrolytic In-Process Dressing) Grinding with Superfine Grain Metallic Bond Wheels,” Annals of the Int. Academy for Prod. Eng., 44 [1] 287-90 (1995).
- H. Ohmori and T. Nakagawa, “Mirror Surface Grinding of Silicon Wafer with Electrolytic In-process Dressing,” Annals of the Int. Academy for Prod. Eng., 39 [1] 329-32 (1990).
- Y. Jeong, H. Kim, J. Choi, and H. Jeong, “The Effect of Slurry Flow Rate and Temperature on CMP Characteristic,” J. Kor. Soc. Prec. Eng., 21 [11] 46-52 (2004).
- H. Lee, K. Cho, M. Jang, C. Jang, S. Kim, and M. Kim, “Characteristics of Large Green and Sintered Alumina Ceramics by Filter Pressing(in Korean),” J. Kor. Ceram. Soc., 46 [3] 306-12 (2009). https://doi.org/10.4191/KCERS.2009.46.3.306
피인용 문헌
- Properties of ELID Mirror-Surface Grinding for Single Crystal Sapphire Optics vol.29, pp.3, 2012, https://doi.org/10.7736/KSPE.2012.29.3.247
- Properties of Mirror-surface Grinding for Metal Matrix Ceramic Composites vol.49, pp.1, 2012, https://doi.org/10.4191/kcers.2012.49.1.090
- Review of Technology Trends for Ceramics Removal-Machining vol.30, pp.12, 2013, https://doi.org/10.7736/KSPE.2013.30.12.1227
- The Effect of Ultrasonic Vibration Table on ELID Grinding Process of Aluminum Nitride Ceramics vol.30, pp.12, 2013, https://doi.org/10.7736/KSPE.2013.30.12.1237
- Development of ELID Monitoring System and its Application to ELID Grinding of Structural Ceramics vol.30, pp.12, 2013, https://doi.org/10.7736/KSPE.2013.30.12.1245
- Effect of Reference Current and Depth of Cut on Electro-Discharge Energy in Electro-Discharge Truing Process for Metal-Bonded Grinding Wheel vol.33, pp.6, 2016, https://doi.org/10.7736/KSPE.2016.33.6.485