Abstract
When we design a product, we spend a considerable amount of time in designing fasteners and their mating parts. Fasteners have special features because of which they are widely used and well standardized. Although we use some equations to design the fasteners, we should select these fasteners from the standardized table. In order to design them quickly using the CAD system, we proceeded as follows. First, we prepared some standardized shapes of fasteners to design them automatically. Next, we built a database of some fasteners such as a tension bolt, lock wire, thread, pin, and snap ring. Then, we used the design equations to quickly and precisely calculate the various parameters. Finally, we used a configuration design method to generate the shapes automatically using the results of the calculation and the values retrieved from the database. We applied this approach to the design of a propulsion structure, and demonstrated that this approach worked well and saved considerable time.
체결류는 일반 제품을 설계할 때 널리 사용되며, 일반 부품에 비하여 표준화가 잘 되어 규격화 되어있다는 특징이 있다. 그래서 체결류를 설계할 때에는 먼저 수식을 사용하여 원하는 기능을 가진 체결류를 계산하고, 최종 사양은 규격에서 계산된 용량을 만족하는 것을 선택한다. 이 연구에서는 이러한 체결류 설계의 특징을 살리며 삼차원 CAD 시스템에서 편리하게 체결류 설계를 할 수 있는 시스템에 대한 연구를 수행하였다. 이 시스템에서 자동으로 설계하기에 적합한 체결류 형상을 정의하였으며, 체결류 설계에 필요한 설계 인자와 형상 치수를 규격에서 추출하여 데이터베이스를 구축하였다. 또한 체결류를 설계할 때 사용하는 설계식을 구현하여 설계식의 입력 인자와 출력 인자를 규격으로부터 추출한 데이터베이스 및 형상 치수와 연결시켰다.