References
- Lu, G. Q., Wang, C. Y., Yen, T. J. and Zhang, X., 2004"Development and Characterization of a Silicon-BasedMicro Direct Methanol Fuel Cell," ElectrochimicaActa, Vol. 49, No. 5, pp. 821-828 https://doi.org/10.1016/j.electacta.2003.09.036
- Lu, G. Q. and Wang, C. Y., 2005 "Development ofMicro Direct Methanol Fuel Cells for High PowerApplications," Journal of Power Sources, Vol. 144, No.1, pp. 141-145 https://doi.org/10.1016/j.jpowsour.2004.12.023
- Choi, J. and Son, G., 2008, “Numerical Study ofDroplet Motion in a Microchannel with DifferentContact Angles,” Journal of Mechanical Science andTechnology Vol. 22, pp. 2590-2599 https://doi.org/10.1007/s12206-008-0905-8
- Liu, H., Song, C., Zhang, L., Zhang, J., Wang, H. andWilkinson, D. P., 2006 "A Review of Anode Catalysisin the Direct Methanol Fuel Cell,” Journal of PowerSources, Vol. 155, No. 2, pp. 95-110 https://doi.org/10.1016/j.jpowsour.2006.01.030
- Dyer, C. K., 2002, “Fuel Cells for PortableApplications,” Fuel Cells Bulletin, Vol. 2002, No. 3,pp. 8-9 https://doi.org/10.1016/S1464-2859(02)80334-0
- Li, P. –W., Zhang, T., Wang, Q. –M., Schaefer, L. andChyu, M. K., 2003, “The Performance of PEM FuelCells Fed with Oxygen Through the Free-ConvectionMode,” Journal of Power Sources, Vol. 114, No. 1, pp.63-69 https://doi.org/10.1016/S0378-7753(02)00535-9
- Morner, S. O. and Klein, S. A., 2001, “ExperimentalEvaluation of the Dynamic Behavior of an Air-Breathing Feul Cell Stack,” Journal of Solar EnergyEngineering, Vol. 123, No. 3, pp. 225-231 https://doi.org/10.1115/1.1385202
- Hottinen, T., Mikkola, M. and Lund, P., 2004,“Evaluation of Planar Free-Breathing PolymerElectrolyte Membrane Fuel Cell Design,” Journal ofPower Sources, Vol.129, No. 1, pp. 68-72 https://doi.org/10.1016/j.jpowsour.2003.11.012
- Bernardi, D. M. and Verbrugge, M. W., 1992,“Mathematical Model of the Solid-Polymer-Electrolyte Fuel Cell,” Journal of ElectrochemicalSociety, Vol. 139, No. 9, pp. 2477-2491 https://doi.org/10.1149/1.2221251
- Yao, S., Santiago, J. G., 2003, "Porous GlassElectroosmotic Pumps: Theory," Journal of Colloidand Interface Science, Vol. 268, No.1, pp. 133-142 https://doi.org/10.1016/S0021-9797(03)00731-8
- Laser, D. J., Yao, S., Chen C. H., Mikkelsen, J. .,Goodsen, K.. E., Santiago J. G., and Kenny, T. W.,2001, “A Low Voltage Silicon MicromachinedParallel-Plate Electrokinetic Pump,” in Proc. 11th Int.Conference. Solid-State Sensors and Actuators(Transducers’01), Munich,Germany
- Yao, S., Hertzog D. E., Zeng, S., Mikkelsen J. C.,and Santiago J. G., 2003, “Porous GlassElectroosmotic Pump: Design and Experiments,”Journal of Colloid Interface Science, Vol. 268, No. 1,pp. 143-153 https://doi.org/10.1016/S0021-9797(03)00730-6
- Prakash, P., Grissom, M. D. and Zydney, A. L., 2006,“Development of an Electroosmotic Pump for HighPerformance Actuation,” Journal of MembraneScience, Vol. 286, No. 1-2, pp. 153-160 https://doi.org/10.1016/j.memsci.2006.09.029
- Yao, S., Myers, A. M., Posner, J. D., Rose, K. A. andSantiago, J. G.., 2006, “Electroosmotic PumpsFabricated from Porous Silicon Membranes,” Journalof Microelectromechanical Systems, Vol. 15, No. 3, pp.717-728 https://doi.org/10.1109/JMEMS.2006.876796
- Chen, Y. F., Li, M. C., Hu, Y. H., Chang, W-J. andWang, C. C-., 2008, “Low-Voltage ElectroosmoticPumping Using Porous Anodic Alumina Membranes,”Microfluidic Nanofluid, Vol. 5, No.2, pp. 234-244
- Brask, A., Kutter, J. P. and Bruus, H., 2005, “Long-termStable Electroosmotic Pump with Ion ExchangeMembrane,” Lab on a Chip, 5, pp. 730-738 https://doi.org/10.1039/b503626g
- Yang, B., Zhang, F., Liang, X., Dasgupta, P. K. andLiu, S., 2009, "Ion Exchange Resin Bead DecoupledHigh-Pressure Electroosmotic Pump," AnalyticalChemistry, Vol. 81, No. 12, pp. 5102-5106 https://doi.org/10.1021/ac900570s
- Wang, X., Wang, S., Gendhar, B., Chang, C., Chang,B. K., Li, G. and Zhao, M., 2009 "ElectroosmoticPumps for Microflow Analysis," TrAC Trends inAnalytical Chemistry, Vol. 28, No. 1, pp. 64-74 https://doi.org/10.1016/j.trac.2008.09.014
- Buie, C. R., Kim D., Litster, S. and Santiago, J. G.,2007, "An Electro-osmotic Fuel Pump for DirectMethanol Fuel Cells," Electrochemical and Solid-stateLetters, Vol. 11, No.11, pp. B196-B200
- Buie, C. R., Posner, J. D., Fabian, T., Cha, T. W.,Kim, D., Prinz, F. B., Eaton, J. K. and Santiago, J. G.,2006, "Water Management in Proton ExchangeMembrane Fuel Cells Using Integrated ElectroosmoticPumping," Journal of Power Sources, Vol. 161, No. 1,pp. 191-202 https://doi.org/10.1016/j.jpowsour.2006.03.021
- Chen C. and Santiago, J. G., 2002, “A PlanarElectroosmotic Micropump,” Journal of MicroelectromechanicSystems, Vol. 11, No. 6, pp. 672-683. https://doi.org/10.1109/JMEMS.2002.805055
Cited by
- Characteristics of Electroosmotic Pump with Cylindrical Porous Glass Frits vol.36, pp.6, 2012, https://doi.org/10.3795/KSME-B.2012.36.6.619
- Evaluation of Reverse Electrodialysis System with Various Compositions of Natural Resources vol.39, pp.6, 2015, https://doi.org/10.3795/KSME-B.2015.39.6.513
- Comparison of Electro-Osmotic Pumps with Two Different Types of Porous Glass Frits vol.35, pp.4, 2011, https://doi.org/10.3795/KSME-B.2011.35.4.379