DOI QR코드

DOI QR Code

Numerical Simulation of Cavitating Flow Around Turbopump Inducer

터보펌프용 인듀서에 대한 캐비테이션 유동해석

  • 최창호 (한국항공우주연구원 터보펌프팀) ;
  • 노준구 (한국항공우주연구원 터보펌프팀) ;
  • 김진한 (한국항공우주연구원 터보펌프팀)
  • Received : 2010.04.07
  • Accepted : 2010.05.25
  • Published : 2010.06.01

Abstract

The computational studies on the cavitating flow around a turbopump inducer were performed to see the effect of the cavitation on the performance of the inducer. The development of cavities around the inducer blades and the head drop of the inducer are observed as the inlet pressure reduces. The change of the backflow at the inducer inlet is also observed with the development of the cavities. The size of the backflow reduces as the inlet pressure is reduced due to the development of the cavities around the blades. The predicted suction performances of the inducer were compared with the experimental results. The results show that the computations overestimate the suction performances of the inducer than the experiments.

Keywords

References

  1. Huzel, D. K. and Huang, D. H., 1992, Modern Engineering for Design of Liquid-Propellant Rocket Engines, AIAA Press.
  2. Brennen, C. E., Hydrodynamics of Pumps, Concepts ETI, Inc. and Oxford University Press, Oxford, 1994.
  3. 김진한, 홍순삼, 정은환, 최창호, 전성민, 2005, “30톤급 액체로켓엔진용 터보펌프 개발 현황”, 제25회 한국추진공학회 추계학술발표대회 논문집.
  4. 최창호, 홍순삼, 김진한, 2003, “인듀서 성능예측에 대한수치해석적 연구,” 한국항공우주학회지, 제 31권, 제 6호, pp.72-78.
  5. 최창호, 노준구, 김대진, 홍순삼, 김진한, 2006, “유동해석을 이용한 터보펌프 성능예측,” 한국항공우주학회지, 제 34권, 제 4호, pp. 70-74.
  6. Choi, C. H., Noh, J. G., Kim, J. S., Hong, S. S., and Kim, J. H., 2006, “Effects of a Bearing Strut on the Performance of a Turbopump Inducer,” Journal of Propulsion and Power, Vol. 22, No. 6, pp. 1413-1417. https://doi.org/10.2514/1.19753
  7. Choi, C. H., Kim, J. S., and Kim, J., 2009, “Study on the Forward-Sweep Inducer for LRE Turbopumps,” Acta Astronautica, Vol. 65, pp. 214-220. https://doi.org/10.1016/j.actaastro.2009.01.044
  8. 홍순삼, 최창호, 김진한, 2004, “현절비가 터보펌프 인듀서의 성능에 미치는 영향,” 대한기계학회논문집 B권, 제 28권, 제 4호, pp. 382-388. https://doi.org/10.3795/KSME-B.2004.28.4.382
  9. Hong, S. S., Kim, J. S., Choi, C. H., and Kim, J., 2006, “Effect of Tip Clearance on the Cavitation Performance of a Turbopump Inducer,” Journal of Propulsion and Power, Vol. 22, No. 1, pp. 174-179. https://doi.org/10.2514/1.11982
  10. 김대진, 홍순삼, 최창호, 김진한, 2006, “로켓엔진용 산화제펌프의 수류시험,” 제 4회 한국유체공학학술대회 논문집, 제 1권, pp. 523-526.
  11. Choi, C. H., Noh, J. G., Kim, D. J., Hong, S. S., and Kim, J. H., 2009, “Effects of Floating-Ring Seal Clearance on the Pump Performance for Turbopumps,” Journal of Propulsion and Power, Vol. 25, No. 1, pp. 191-195. https://doi.org/10.2514/1.36806
  12. Flores, N. G., Rolland, J., Goncalves, E., Patella, R., F., and Rebattet, C., 2006, “Head Drop of Spatial Turbopump Inducer,” Sixth International Symposium on Cavitation, CAV2006, Wageningen, Netherlands September 2006.
  13. Delannoy Y., and Kueny, J. L., 1990, “Two phase approach in unsteady cavitation modelling,” Cavitation and Multiphase Flow Forum, ASME-FED vol. 98, pp. 153-158.
  14. Ugajin, H., Kawai, M., Okita, K., Ohta, T., Kajishima, T., Nakano, M., and Tomaru, H., 2007, “Numerical Analysis of the Unsteady Cavitating Flow in a 2D-Cascadeand a 3D-inducer,” 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA paper 2007-5535, July 2007.
  15. Hosangadi, A., Ahuja, V., and Ungenwitter, R., J., 2007, “Simulations of Rotating Cavitation Instabilities in the SSME LPFP Inducer,” 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA paper2007-5536, July 2007.
  16. Fine/Turbo 8.7-2 Manual, 2009, Numeca Inc.
  17. Knapp, R. T., Daily, J. T., and Hammit, F. G. 1970, Cavitation, Mc Graw Hill.

Cited by

  1. Numerical Simulation of Suction Performance of a Forward-Sweep Inducer for Turbopumps vol.17, pp.3, 2014, https://doi.org/10.5293/kfma.2014.17.3.013
  2. Put Effect of the inducer scale on the suction performance similarity of a turbopump vol.17, pp.4, 2014, https://doi.org/10.5293/kfma.2014.17.4.047